Buchumschlag

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression

A new numerical-analytical method for solving physically nonlinear bending problems of thin plates with complex shape made from materials that differently resist to tension and compression is developed. The uninterrupted parameter continuation method is used to formulate and linearize the problem of...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
1. Verfasser:	Склепус, C. М.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2025
Online Zugang:	https://journals.uran.ua/jme/article/view/283556
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: Склепус, C. М.
Veröffentlicht: (2025)

Bending of Plates with Complex Shape Made from Materials that Differently Resist to Tension and Compression
von: S. M. Sklepus
Veröffentlicht: (2023)

Nonlinear Deformation of Cylinders from Materials with Different Behavior in Tension and Compression
von: Галішин, О. З., et al.
Veröffentlicht: (2024)

Nonlinear Deformation of Cylinders from Materials with Different Behavior in Tension and Compression
von: Галішин, О. З., et al.
Veröffentlicht: (2024)

Method of Solving Geometrically Nonlinear Bending Problems of Thin Shallow Shells of Complex Shape
von: Склепус, C. М.
Veröffentlicht: (2023)

Method of Solving Geometrically Nonlinear Bending Problems of Thin Shallow Shells of Complex Shape
von: Склепус, C. М.
Veröffentlicht: (2023)

Elastoplastic Axisymmetric Stress-Strain State of Thin Shells from Materials with Different Strength to Tension and Compression
von: M. O. Babeshko, et al.
Veröffentlicht: (2021)

Effect of Non-Stechiometry and Different-Strength of Perovskite to the Tension-Compression on the Diffusional Creep of Thick-Wall Cylinder Made of Perovskite
von: O. O. Zolochevskyi, et al.
Veröffentlicht: (2021)

Bending Vibrations of the Bimorph Pirzoceramic Plates of Non-Canonical Shape
von: Shakeri Mobarake, et al.
Veröffentlicht: (2019)

Creep of Bodies of Revolution of Complex Shape made of Functionally Gradient Materials
von: S. M. Sklepus
Veröffentlicht: (2022)

Optimization of the hole shapes in a quasi-orthotropic plate under biaxial tension
von: M. P. Savruk, et al.
Veröffentlicht: (2021)

The compatible action of bending with the tension of an isotropic plate containing a crack without contact of their tips and with taking into account plastic zones and material strengthening
von: V. K. Opanasovych, et al.
Veröffentlicht: (2018)

Combined bending and tension of the plate with a rectilinear through-crack in the presence of plastic zones in its tips with regard for the contact of its edges and linear strengthening of the material
von: S. O. Alfavitska, et al.
Veröffentlicht: (2017)

Bending of axisymmeric loaded thick plates
von: V. P. Revenko
Veröffentlicht: (2019)

Bending of partially supported circular plate
von: V. I. Ostryk, et al.
Veröffentlicht: (2014)

On the Stress-Strain State of Plates of Complex Shape
von: Ja. Grigorenko, et al.
Veröffentlicht: (2018)

To the Theory of Growth of Mode I Fatigue Cracks in Thin Isotropic Plates of Finite Sizes under Unilateral Tension-Compression
von: V. P. Golub, et al.
Veröffentlicht: (2018)

Method of Solving Geometrically Nonlinear Bending Problems of Thin Shallow Shells of Complex Shape
von: S. M. Sklepus
Veröffentlicht: (2022)

On Determination of Stress-Strain State of Plates of Complex Shape
von: Ja. Grigorenko, et al.
Veröffentlicht: (2018)

Cyclic cracking resistance of brittle materials in compressive loading
von: Lanin, A.G.
Veröffentlicht: (2009)

To the Analysis of Creep Strains of the Thin-Wall Tubular Elements Made of the Linearly Viscoelastic Materials in Conditions of Tension with Torsion
von: V. P. Holub, et al.
Veröffentlicht: (2022)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)

Complexities of Culture and Tensions in the Past
von: N. Chaturvedi
Veröffentlicht: (2023)

Determination of stresses near elastic inclusions in plates of complex shape
von: V. M. Maksymovych, et al.
Veröffentlicht: (2014)

Creep Failure Time of Thin-Walled Pipes under Combined Internal Pressure, Bending, and Tension
von: El Megharbel, A.
Veröffentlicht: (2010)

On Effect of Orthotropy on Stress-Strain State of Quadrangular Plates of Different Shape
von: Ja. Grigorenko, et al.
Veröffentlicht: (2019)

The influence of ultrasonic vibration on corrosion resistance of heat exchanger plates made of AISI 316 steel
von: H. S. Vasyliev, et al.
Veröffentlicht: (2018)

Behavior of Functionally Graded Porous Plate in Bending with Smoothed Element
von: Ton-That, L. H.
Veröffentlicht: (2025)

Behavior of Functionally Graded Porous Plate in Bending with Smoothed Element
von: Ton-That, L. H.
Veröffentlicht: (2025)

Free Vibrations of Composite Plates made of Functionally Gradient Material on Elastic or Rigid Foundation
von: O. V. Marchuk, et al.
Veröffentlicht: (2023)

Estimation of electrical resistivity of conductive materials of random shapes
von: Gans, Š., et al.
Veröffentlicht: (2023)

Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
von: Yu. M. Kobzar
Veröffentlicht: (2022)

Models of Long-Term Brittle Fracture of Rods under Tension and Compression in Condition of Creep
von: Ju. M. Kobzar
Veröffentlicht: (2017)

Solving the Problems on Stress-Strain State of Plates of Complex Shape in the Refined Statement
von: Ja. Grigorenko, et al.
Veröffentlicht: (2017)

Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
von: Кошкін, А. О., et al.
Veröffentlicht: (2026)

Mathematical Modeling of Bending of Isotropic and Anisotropic Plates with Elliptical and Linear Inclusions
von: Кошкін, А. О., et al.
Veröffentlicht: (2026)

Dynamic bending of plastic polymetallic plates with piecewise-smooth elliptical contours
von: Ju. V. Nemirovskij
Veröffentlicht: (2019)

Investigation of bending of anisotropic plates with inclusions based on singular integral relations
von: O. V. Maksymovych, et al.
Veröffentlicht: (2018)

Bending of a circular plate by heat sources distributed along the curve
von: B. S. Khapko
Veröffentlicht: (2010)

Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)