Buchumschlag

The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim

The object of research in the paper is the technology of manufacturing segments of the rotor rim of large hydrogenerators-motors. The subject of study is the design and geometrical state of the rotor rim during the operation of hydraulic units. The goal is to make a three-dimensional mechanical calc...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2024
1. Verfasser:	Макаров, П. М.
Format:	Artikel
Sprache:	Englisch Ukrainisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2024
Online Zugang:	https://journals.uran.ua/jme/article/view/296889
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

The Choice of a Rational Technology for Manufacturing the Hydrogenerators-Motors Rotor Rim
von: Макаров, П. М.
Veröffentlicht: (2024)

FEATURES OF ELECTRIC MOTOR CHOICE FOR NUCLEAR POWER PLANT TECHNOLOGICAL OBJECTS
von: Pavlenko, T. P., et al.
Veröffentlicht: (2013)

FUNCTIONAL CORRELATION OF PARAMETERS AND CRITERIA OF RATIONAL CHOICE FOR ELECTRIC DEVICE
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Choice of a rational variant of the technical implementation of complex organizational-technical systems in the context of multicriteriality
von: Putyatin, V. G.
Veröffentlicht: (2015)

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)

Influence of Thermal and Mechanical Factors on the Stressed State of Large Components of Hydrogenerator-Motors
von: Tretyak, Aleksey V., et al.
Veröffentlicht: (2018)

Increase of the Efficiency of Heat Supply Units of the CHP Plants Due to the Choice of Rational Heat Release Modes
von: Шубенко, О. Л., et al.
Veröffentlicht: (2024)

Increase of the Efficiency of Heat Supply Units of the CHP Plants Due to the Choice of Rational Heat Release Modes
von: Шубенко, О. Л., et al.
Veröffentlicht: (2024)

Technologies for manufacturing optical media for long-term data storage
von: Petrov, V. V., et al.
Veröffentlicht: (2017)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

Linear Vibrations Analysis of a Composite Sandwich Conical Shell Manufactured by Additive Technologies
von: Аврамов, К. В., et al.
Veröffentlicht: (2026)

A mathematical model of an induction motor with the stator and rotor unsymmetry
von: Chaban, V. Y., et al.
Veröffentlicht: (2012)

HALF-DIFFERENTIAL CAPACITIVE AIR GAP SENSOR FOR HYDROGENERATORS
von: Levytskyi , A., et al.
Veröffentlicht: (2024)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Analytical Calculation of the Mechanical Properties of Honeycombs Printed Using the FDM Additive Manufacturing Technology
von: Аврамов, К. В., et al.
Veröffentlicht: (2021)

Ensuring standardized parameters for the transmission of digital signals by twisted pairs at the technological stage of manufacturing cables for industrial operating technologies
von: Bezprozvannych, G. V., et al.
Veröffentlicht: (2023)

A METHOD FOR CALCULATING MECHANICAL CHARACTERISTICS OF INDUCTION MOTORS WITH SQUIRREL-CAGE ROTOR
von: Malyar, V. S., et al.
Veröffentlicht: (2019)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Manufacturing Technology, Experimental and Numerical Analysis of Static Bending of Three-Layer Composite Plate with Honeycomb Structure
von: Деревянко, І. І., et al.
Veröffentlicht: (2025)

Potential possibility and technical rationality of heat-pumping technologies application at the combined production of electric and thermal energy
von: Чиркин, Н. Б., et al.
Veröffentlicht: (2014)

Potential possibility and technical rationality of heat-pumping technologies application at the combined production of electric and thermal energy
von: Чиркин, Н. Б., et al.
Veröffentlicht: (2014)

DIAGNOSTICS OF INDUCTION MOTOR ROTOR COMBINED DEFECTS WITH AN INDUCTION METHOD
von: Vaskovskyi, Yu. M., et al.
Veröffentlicht: (2013)

Mathematical modelling of starting modes of induction motors with squirrel-cage rotor
von: Malyar, V. S., et al.
Veröffentlicht: (2021)

Mathematical modeling of rheostat-reactor start of wound-rotor induction motors
von: Malyar, V. S., et al.
Veröffentlicht: (2022)

RESEARCH OF DYNAMIC PARAMETERS OF THE ELECTRIC DRIVE ON THE BASIS OF ROLLING ROTOR MOTOR
von: Kulinchenko, G. V., et al.
Veröffentlicht: (2016)

Wavelet packet analysis for rotor bar breakage in an inverter induction motor
von: Abu Ibaid, O. Z. I., et al.
Veröffentlicht: (2023)

On the choice of the zeroth approximation in the determination of a complex contact
von: Dubovenko, Yu. I., et al.
Veröffentlicht: (2013)

INFLUENCE OF MANUFACTURING QUALITY OF LAMINATED CORE ON A TURBOGENERATOR EXPLOITATION TERM
von: Shevchenko, V. V.
Veröffentlicht: (2016)

Сalculation of maintenance of surface drainage roofing of a German manufacturer
von: Tkachenko, Tetiana M., et al.
Veröffentlicht: (2020)

Formation and Prospects of Development of CD Manufacturing in Ukraine
von: Масол, И. В.
Veröffentlicht: (2012)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

Recognition of emergency situations of large hydrogenerators and turbogenerators by multi factors analysis of complicated stressed states of units and component parts
von: Вакуленко, А. Н., et al.
Veröffentlicht: (2015)

THE PROBLEM OF CORRECT CHOICE OF FERRITE BEADS
von: Gurevich, Vladimir I.
Veröffentlicht: (2016)

DEVELOPMENT OF A MATHEMATICAL MODEL FOR A FREQUENCY-CONTROLLED ASYNCHRONOUS MOTOR ROTOR TEMPERATURE FIELD ON THE BASIS OF DIFFERENTIAL EQUATIONS OF HEAT CONDUCTION
von: Ostashevskiy, N. A., et al.
Veröffentlicht: (2013)

Computer Modeling of the Process for Manufacturing Spherical Vessels from Sheet Steel by Hydroforming
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Computer Modeling of the Process for Manufacturing Spherical Vessels from Sheet Steel by Hydroforming
von: Гонтаровський, П. П., et al.
Veröffentlicht: (2026)

Improved speed sensorless control for induction motor drives using rotor flux angle estimation
von: Tran, C. D., et al.
Veröffentlicht: (2025)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

The choice of methods znosotyykosty improving vehicle appointment
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)

The choice of methods znosotyykosty improving vehicle appointment
von: Остапчук, Віктор Миколайович
Veröffentlicht: (2014)