Buchumschlag

Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content

The paper examines core type transformers in which windings clamping and magnetic system end yokes clamping is accomplished by means of the same yoke beams. With regard to forces of friction between the yoke beams and the yoke there were obtained expressions for internal forces in the active part el...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
1. Verfasser:	Лазарев, И. В.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	transformer winding axial forces operation shipment moisture content УДК 621.314.21.045.001.5
Online Zugang:	https://journals.uran.ua/jme/article/view/31403
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
von: Лазарев, И. В.
Veröffentlicht: (2014)

Axial internal forces in power transformer active part elements after short circuit
von: Лазарев, И. В., et al.
Veröffentlicht: (2015)

Axial internal forces in power transformer active part elements after short circuit
von: Лазарев, И. В., et al.
Veröffentlicht: (2015)

Axial internal forces in power transformer active part elements after short circuit
von: Лазарев, И. В.
Veröffentlicht: (2015)

Axial internal forces in power transformer active part elements after short circuit
von: Лазарев, И. В.
Veröffentlicht: (2015)

Axial internal forces in power transformer active part elements under windings clamping, variation of temperature and insulating materials moisture content
von: I. V. Lazarev
Veröffentlicht: (2014)

DYNAMICS MODEL OF MOISTURE IN PAPER INSULATION-TRANSFORMER OIL SYSTEM IN NON-STATIONARY THERMAL MODES OF THE POWER TRANSFORMER
von: Vasilevskij, V. V.
Veröffentlicht: (2016)

The influence of partial deforestation on moisture regime: sums of precipitation and total soil moisture content for the territory of Ukraine based on data of numerical experiment LUMIP
von: Pysarenko, L.A., et al.
Veröffentlicht: (2022)

Decrease in the damage of powerful turbogenerator stator caused by vibration in the end zones (analysis, hypotheses, experiment)
von: Shumilov, Yu. A., et al.
Veröffentlicht: (2014)

THE THEORETICAL JUSTIFICATION FOR THE NEAT-MOISTURE EXCHANGE PARAMETERS IN SOILS AND ATMOSPHERIC AIR UNDER THE CONDITIONS OF CAVE COMPLEX OF KIEV-PECHERSK LAVRA
von: Sitnikov, А.B.
Veröffentlicht: (2014)

The method of accelerated testing of solar drying moisture contain mediums processes
von: Kuchinsky, V., et al.
Veröffentlicht: (2017)

A HIGH SENSITIVE MICROWAVE MEASURING DEVICE OF THE MOISTURE CONTENT IN THE NON-POLAR DIELECTRIC LIQUIDS BASED ON AN INHOMOGENEOUS STEP COAXIAL RESONATOR
von: Rudakov, V. V., et al.
Veröffentlicht: (2016)

THE SCIENTIFIC FOUNDATIONS OF MOISTURE AND HEAT EXCHANGE UNDER THE CONDITIONS OF CAVE COMPLEX OF KYIV PECHERSK LAVRA
von: Sitnikov, A.B.
Veröffentlicht: (2014)

Investigation the influence of soil’s moisture regime on their degradation using the remote sensing and ground field verification
von: Romanciuc, Inna
Veröffentlicht: (2018)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Moisture as an indicator of the manifestation of hazardous properties of coal seams
von: Rudniev, Ye.S., et al.
Veröffentlicht: (2022)

THE METHODICAL ASPECTS OF VALIDITY ASSESGMENT FOR HEAT-MOISTURE EXCHANGE STUDIES (AS AN EXAMPLE THE COMPLEX OF KYIV PECHERSK LAVRA)
von: Sitnikov, A.B.
Veröffentlicht: (2015)

Method for assessing unevenness of cellulose insulation layers aging of power transformers winding
von: Poliakov, M. O., et al.
Veröffentlicht: (2022)

DETERMINATION OF INSULATION PARAMETERS OF CURRENT TRANSFORMERS AT MULTIPLE MEASUREMENTS IN MONITORING SYSTEMS UNDER WORKING VOLTAGE
von: Beliaev, V. K., et al.
Veröffentlicht: (2016)

MULTIFREQUENCY ALGORITHMS FOR DETERMINING THE MOISTURE CONTENT OF LIQUID EMULSIONS BY THE METHOD OF RESONANCE DIELCOMETRY
von: Korobko, A. A.
Veröffentlicht: (2017)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

THE DIAGNOSTICS OF INDUCTION MOTORS ROTOR BAR BREAKS BASED ON THE ANALYSIS OF ELECTROMOTIVE FORCE IN THE STATOR WINDINGS
von: Zagirnyak, M. V., et al.
Veröffentlicht: (2014)

Оne mean for optimal plate heat exchanger calculation
von: Арсеньева, О. П., et al.
Veröffentlicht: (2016)

Оne mean for optimal plate heat exchanger calculation
von: Арсеньева, О. П., et al.
Veröffentlicht: (2016)

Optimal design the system of serial plate heat exchangers
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Optimal design the system of serial plate heat exchangers
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Calculation of plate heat exchanger with different channel types in one device
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Calculation of plate heat exchanger with different channel types in one device
von: Хавин, Г. Л.
Veröffentlicht: (2016)

Research and analysis of international and national approaches in building information security system in GRID
von: Borovska, O.M., et al.
Veröffentlicht: (2018)

ASSESSMENT OF THE RESOURCE CONSUMPTION OF OIL-FILLED POWER TRANSFORMER PAPER INSULATION BASED ON UPDATED AGING INTEGRAL
von: Vasilevskij, V. V.
Veröffentlicht: (2015)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

COMPARATIVE ANALYSIS OF ACTIVE POWER LOSSES OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

Development of the reliable engineering method of the quality estimation of the turbine axial-radial sealing
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
von: Stavinskii, A. A., et al.
Veröffentlicht: (2015)

DOUBLE STATOR AXIAL FLUX MAGNETOELECTRIC GENERATOR FOR CONVERSION OF LOW POTENTIAL MECHANICAL ENERGY
von: Kovalenko , M., et al.
Veröffentlicht: (2024)

Axial flux machine with non-slotted torus-ns rotor type. Design and investigate for electric traction
von: Larbi, B., et al.
Veröffentlicht: (2023)

FRACTIONAL WINDINGS HARMONIC ANALYSIS
von: Degtev, V. G.
Veröffentlicht: (2013)