Buchumschlag

Enhancement of Aeroengine Combustion Chamber Air Cooling Holes Design for Emission Reduction and Pattern Factor Control

The results of a comprehensive numerical analysis of temperature uniformity and NOx and CO emission predictions in an aeroengine annular combustor liner, conducted by geometrical modifications through design changes in primary cooling air, including effusion cooling holes, are shown in the paper. A...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2025
1. Verfasser:	Hajivand, Masoud
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2025
Online Zugang:	https://journals.uran.ua/jme/article/view/321233
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Enhancement of Aeroengine Combustion Chamber Air Cooling Holes Design for Emission Reduction and Pattern Factor Control
von: Hajivand, Masoud
Veröffentlicht: (2025)

Reduction of natural gas consumption and reduction of emissions with combustion products in municipal heat supply
von: O. I. Sihal, et al.
Veröffentlicht: (2019)

Experience of the Development of Burners, Chambers and Technologies for Reducing Emissions of Nitrogen Oxides by Boilers During the Combustion of Natural Gas
von: Ja. Sigal, et al.
Veröffentlicht: (2019)

Reduction of Nitrogen Oxides Effluents within an Open Flame by Input the Water Vapour into Combustion Air Flow
von: B. S. Soroka, et al.
Veröffentlicht: (2018)

About a co-combustion technology for brown coal and straw in combustion chambers with a ?xed bed
von: A. S. Matvejchuk
Veröffentlicht: (2012)

Optimization of mathematical models of aerodynamic surfaces for aeroengines on the base of B-splines
von: O. M. Lytvyn, et al.
Veröffentlicht: (2010)

The Features of Tubular Type Burner System for Combustion Chamber Gas Transporting Unit
von: G. B. Varlamov, et al.
Veröffentlicht: (2012)

The automation design of central monitoring refrigerating chamber
von: Dzh. F. Mamedov, et al.
Veröffentlicht: (2002)

Mathematical Description and Numerical Study of Workflow in Combustion Chamber of Boiler with Circulating Fuidized Bed
von: B. B. Rokhman, et al.
Veröffentlicht: (2012)

Combustion of ethanol+air mixture supported by transverse arc plasma
von: Yukhymenko, V.V., et al.
Veröffentlicht: (2007)

Study of ignition and combustion of two-fraction coal-air suspension
von: S. G. Orlovskaya, et al.
Veröffentlicht: (2018)

Study of ignition and combustion of two-fraction coal-air suspension
von: S. G. Orlovskaya, et al.
Veröffentlicht: (2018)

Analysis of conditions for burning of volatiles and air mixtures at biomass combustion
von: M. M. Zhovmir
Veröffentlicht: (2014)

Investigation of Co-firing for Fuel Derived from Municipal Solid Waste in a Model Combustion Chamber
von: S. H. Kobzar, et al.
Veröffentlicht: (2020)

Enhancement of the cooling ability of a cooling tower at the expense of increasing the cooling surface in the course of liquid atomization by centrifugal atomizers
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2006)

Film cooling by means of one-row inclined holes arranged in dimples
von: A. A. Khalatov, et al.
Veröffentlicht: (2015)

JUSTIFICATION OF RECOVERY CHAMBER HEIGHT AND AIR SUPPLY INFLUENCE ON WOOD GAS OUTPUT AND QUALITY
von: Yarosh, Y., et al.
Veröffentlicht: (2018)

Justification of recovery chamber height and air supply influence on wood gas output and quality
von: Ya. D. Yarosh, et al.
Veröffentlicht: (2018)

Thermodynamics of toxic automotive emissions in city air and air purification by plants
von: Ya. Believtsev, et al.
Veröffentlicht: (2018)

PECULIARITIES OF APPLICATION OF THE NORMATIVE DOCUMENTS ON LIMITATION OF POLLUTANT EMISSIONS AT BIOMASS COMBUSTION
von: Zhovmir, M., et al.
Veröffentlicht: (2019)

Peculiarities of application of the normative documents on limitation of pollutant emissions at biomass combustion
von: M. M. Zhovmir, et al.
Veröffentlicht: (2019)

The influence of oxygen enrichment of combustion air on the resistance of the lining of hot-blast stoves
von: L. P. Hres, et al.
Veröffentlicht: (2022)

Study of Heat-Recovery Systems for Heating and Moisturing Combustion Air of Boiler Units
von: N. M. Fialko, et al.
Veröffentlicht: (2020)

Study of Heat-Recovery Systems for Heating and Moisturing Combustion Air of Boiler Units
von: Fialko, N.M., et al.
Veröffentlicht: (2020)

AN IMPACT OF COMBUSTION CHAMBER GEOMETRY ON CHARARACTERSTICS OF A DIESEL ENGINE FUELLED WITH GARCINIA GUMMI-GUTTA METHYL ESTER (GGGME)
von: Vinothkumar , A., et al.
Veröffentlicht: (2026)

Power efficiency of the &quot;wet&quot; combustion and pollutants formation reduction
von: B. S. Soroka, et al.
Veröffentlicht: (2019)

Computer simulation of two perspective single-row hole systems of film cooling
von: A. A. Khalatov, et al.
Veröffentlicht: (2017)

Optimization of the width of air cooling duct of spent fuel cask
von: S. V. Aljokhina, et al.
Veröffentlicht: (2011)

Implementation of european trends regarding the reduction of air pollutants in Ukraine
von: S. P. Shapoval, et al.
Veröffentlicht: (2024)

Implementation of european trends regarding the reduction of air pollutants in Ukraine
von: Shapoval, Stepan P., et al.
Veröffentlicht: (2024)

Landuse Patterns, Air Quality and Bird Diversity in Urban Landscapes of Delhi
von: Kumar, V., et al.
Veröffentlicht: (2022)

Landuse Patterns, Air Quality and Bird Diversity in Urban Landscapes of Delhi
von: Kumar, V., et al.
Veröffentlicht: (2022)

Features of autoelectronic emission in the superthin gap of the gas-discharge cell in ionization semi-conductor the chamber
von: 3. X. Khajdarov
Veröffentlicht: (2006)

Mechanical behaviour of cooled bodies with account of heat energy emission
von: O. R. Hachkevych, et al.
Veröffentlicht: (2010)

CFD-simulation of radiator for air cooling of microprocessors in a limitided space
von: V. E. Trofimov, et al.
Veröffentlicht: (2016)

The Technology of Nitrogen Oxide Emissions Reduction at Pulverized Coal Burning
von: N. I. Dunaievska, et al.
Veröffentlicht: (2016)

THE IMPACT OF DIESEL AND VARIOUS BLENDS OF BIODIESEL ON PERFORMANCE, EMISSIONS, AND COMBUSTION IN DI DIESEL ENGINES
von: Sekharraj , K., et al.
Veröffentlicht: (2026)

The Method and Burning Device for Phasic Combustion of Gaseous and Liquid Fuels with Fuel and Air Prolonged Mixing
von: V. S. Pikashov, et al.
Veröffentlicht: (2012)

An approach to behavioral software models refinement using design patterns
von: Chebanyuk, O.B.
Veröffentlicht: (2025)

Enhancing the Efficiency of the Turbogenerator Cooling System Through the Use of Finned Tubes in the Gas Cooler
von: Шестак, Б. К.
Veröffentlicht: (2026)