Buchumschlag

Numerical simulation of flow in a compressor cascade under wide range of flow conditions

The numerical results are presented for the two-dimension viscous turbulent flow of working medium through the transonic compressor cascade under wide range of flow conditions. The mathematical model is constructed on a basis of the system of the Reynolds-averaged Navier-Stokes equations and the two...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2014
Hauptverfasser:	Папазов, С. В., Яковлев, В. А., Ершов, С. В.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2014
Schlagworte:	axial compressor airfoil cascade viscous flow numerical simulation numerical Schliren approach
Online Zugang:	https://journals.uran.ua/jme/article/view/35855
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Numerical simulation of flow in a compressor cascade under wide range of flow conditions
von: Папазов, С. В., et al.
Veröffentlicht: (2014)

The analysis of gas-dynamic structure of stream in grates of profiles of axial compressor of turbo-engine
von: Карпик, А. А., et al.
Veröffentlicht: (2015)

The analysis of gas-dynamic structure of stream in grates of profiles of axial compressor of turbo-engine
von: Карпик, А. А., et al.
Veröffentlicht: (2015)

An implicit numerical scheme for gas flow simulation in cascade of vibrating airfoils
von: Быков, Ю. А., et al.
Veröffentlicht: (2015)

An implicit numerical scheme for gas flow simulation in cascade of vibrating airfoils
von: Быков, Ю. А., et al.
Veröffentlicht: (2015)

The numerical simulation of a 3D flow in the VKI-GENOA turbine cascade taking into account the laminar-turbulent transition
von: Ершов, С. В., et al.
Veröffentlicht: (2015)

The numerical simulation of a 3D flow in the VKI-GENOA turbine cascade taking into account the laminar-turbulent transition
von: Ершов, С. В., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Estimation of Magnitudes of a Static and Dynamic Axial Thrust Acting on the Impeller by Applying the Mathematical Model Approach to a Flow through Hydraulic Passages of the Hydromachine with Account for a Flow through Auxiliary Channels
von: Луговая, С. О., et al.
Veröffentlicht: (2015)

Grid resolution influence on the results of three-dimensional flow calculations in turbomachine flowpaths at use RANS models
von: Ершов, С. В., et al.
Veröffentlicht: (2015)

Grid resolution influence on the results of three-dimensional flow calculations in turbomachine flowpaths at use RANS models
von: Ершов, С. В., et al.
Veröffentlicht: (2015)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

Analytical method of profiling axial-radial compressor impellers
von: Rusanov, A. V., et al.
Veröffentlicht: (2019)

Selection of Systemic Characteristics for Turbo-Compressor Package Based on Efficiency Analysis According to Full Scale Tests Results. Part I
von: Парафейник, В. П., et al.
Veröffentlicht: (2016)

Selection of Systemic Characteristics for Turbo-Compressor Package Based on Efficiency Analysis According to Full Scale Tests Results. Part I
von: Парафейник, В. П., et al.
Veröffentlicht: (2016)

The Influence of Mesh Resolution on 3D RANS Flow Simulations in Turbomachinery Flow Parts
von: Ершов, С. В., et al.
Veröffentlicht: (2021)

The Influence of Mesh Resolution on 3D RANS Flow Simulations in Turbomachinery Flow Parts
von: Ершов, С. В., et al.
Veröffentlicht: (2021)

INFLUENCE OF GROUNDWATER FILTRATION FLOW ON THE THERMAL EFFICIENCY OF UNDERGROUND HEAT EXCHANGER
von: Basok, B., et al.
Veröffentlicht: (2022)

Thermodynamic Analysis Issues of Operating Process Efficiency for Booster Turbo-Compressors with Gas Turbine Drive. Part I
von: Тертышный, И. Н., et al.
Veröffentlicht: (2015)

Thermodynamic Analysis Issues of Operating Process Efficiency for Booster Turbo-Compressors with Gas Turbine Drive. Part I
von: Тертышный, И. Н., et al.
Veröffentlicht: (2015)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. II. Methodological Approach to Design Modular Turbo-Compressor Packages for CS of Gas Industry
von: Парафейник, В. П., et al.
Veröffentlicht: (2017)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. II. Methodological Approach to Design Modular Turbo-Compressor Packages for CS of Gas Industry
von: Парафейник, В. П., et al.
Veröffentlicht: (2017)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. III. Efficiency Research of Basic Systems of Turbo-Compressor Package GPA-C-6,3A/56-1,45 on Full-Scale Test Results
von: Щербаков, Н. С., et al.
Veröffentlicht: (2017)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. III. Efficiency Research of Basic Systems of Turbo-Compressor Package GPA-C-6,3A/56-1,45 on Full-Scale Test Results
von: Щербаков, Н. С., et al.
Veröffentlicht: (2017)

Results of Experimental–Numerical Modeling of Smoke Flow under Various Temperature Conditions
von: Kolesnyk, Vitalii, et al.
Veröffentlicht: (2026)

Thermodynamic analysis issues of operating process efficiency of booster turbo-compressor packages with gas turbine drive. Part II
von: Тертышный, Н. И., et al.
Veröffentlicht: (2016)

Thermodynamic analysis issues of operating process efficiency of booster turbo-compressor packages with gas turbine drive. Part II
von: Тертышный, Н. И., et al.
Veröffentlicht: (2016)

Application package for computations of 3d flow of viscous gas through tur-bomachinery cascades
von: Ершов, С. В.
Veröffentlicht: (2012)

Application package for computations of 3d flow of viscous gas through tur-bomachinery cascades
von: Ершов, С. В.
Veröffentlicht: (2012)

SIMULATION OF AN AC DRIVE SYSTEM COMPRISING A CASCADE MULTILEVEL VOLTAGE INVERTER
von: Zhemerov, George G., et al.
Veröffentlicht: (2013)

Aeroelastic behaviour of the turbine blade row in 3D viscous flow
von: Gnesin, V. I., et al.
Veröffentlicht: (2018)

Aeroelastic behaviour of the turbine blade row in 3D viscous flow
von: Gnesin, V. I., et al.
Veröffentlicht: (2018)

Development of flow parts of cogeneration turbines with a capacity of 2.5 and 5 MW using modern computer technology
von: Русанов, Р. А., et al.
Veröffentlicht: (2015)

Development of flow parts of cogeneration turbines with a capacity of 2.5 and 5 MW using modern computer technology
von: Русанов, Р. А., et al.
Veröffentlicht: (2015)

Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

Influence of the meridional shape of the nozzle cascade on the NOZZLE cascade flow structure
von: Бойко, А. В., et al.
Veröffentlicht: (2015)

On certain families of sparse numerical semigroups with Frobenius number even
von: Tizziotti, Guilherme, et al.
Veröffentlicht: (2019)

A review of methods and technologies for scenario analysis of cascading effects
von: Сенченко, В. Р., et al.
Veröffentlicht: (2024)

NUMERICAL SIMULATION OF A SELF-REGENERATIVE FUSE OPERATION WITH A SHORT COMMUTATIOM PERIOD
von: Dubovenko, K. V., et al.
Veröffentlicht: (2012)

A method of designing flow parts of the high-pressure shaft fan and blower fans
von: Гриценко, Н. И., et al.
Veröffentlicht: (2016)