Buchumschlag

Express-analysis when modeling the stress-strain state of stamp rigging elements

Proposed is approach, which is based on application of express-models for numerical simulation of stress-strain state of stamp rigging elements. Using these models, a study was conducted many of stamp rigging elements. Interest of considerable is the question of quality pre-Express-analysis of the i...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2015
1. Verfasser:	Демина, Н. А.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2015
Schlagworte:	mathematical model parametric model express-model operation of separation of sheet metal forming matrix stress-strain state balance of displacements УДК 539.3
Online Zugang:	https://journals.uran.ua/jme/article/view/40259
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Express-analysis when modeling the stress-strain state of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2015)

Parametric models for investigation of contact interaction of elements stamp tools
von: Демина, Наталья Анатольевна
Veröffentlicht: (2014)

Parametric models for investigation of contact interaction of elements stamp tools
von: Демина, Наталья Анатольевна
Veröffentlicht: (2014)

Mathematical modeling of contact interaction of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2014)

Mathematical modeling of contact interaction of stamp rigging elements
von: Демина, Н. А.
Veröffentlicht: (2014)

Express-analysis when modeling the stress-strain state of stamp rigging elements
von: N. A. Djomina
Veröffentlicht: (2015)

Stress-deformable state near the earthquake focus
von: Lubkov, M.V.
Veröffentlicht: (2025)

Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)

Analysis of Crack Growth in the Wall of an Electrolyser Compartment
von: Hontarovskyi, Pavlo P., et al.
Veröffentlicht: (2021)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)

Experimental Strength Analysis of Variable Stiffness Waffel-Grid Cylindrical Compartments. Part 2. Analysis Results
von: Degtyarev, Maksim A., et al.
Veröffentlicht: (2019)

Acceleration of exit to steady-state mode when modeling semiconductor converters
von: Yagup, V. G., et al.
Veröffentlicht: (2023)

Three-dimensional geological modelling of the eastern and western parts of the Hovsan field according to geological and geophysical data
von: Ahmedov, T.R., et al.
Veröffentlicht: (2024)

Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)

Methods to Reduce Material Intensity of Tail Sections of Launch Vehicles
von: Dehtiarov, Maksym O., et al.
Veröffentlicht: (2020)

Analysis of stress-strain state of Caucasus region (Azerbaijan) on the basis of maximum horizontal stress vectors and "World Stress Map" application technique
von: Babayev, G.P., et al.
Veröffentlicht: (2017)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major stress-strain state of double support multilayer beams under concentrated load. Part 1. Model construction
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Depth equalization of the dose when irradiated by electrons at different angles
von: Rudychev, V.G., et al.
Veröffentlicht: (2020)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Major Stress-Strain State of Double Support Multilayer Beams Under Concentrated Load. Part 2. Model Implementation and Calculation Results
von: Kovalchuk, S. B., et al.
Veröffentlicht: (2019)

Optimization model for energy demand forecasting based on the synthesis methods of cross-industry perspective, fuel and energy balance taking into account environmental constraints
von: Ruban-Maksimets O.O.
Veröffentlicht: (2010)

Parametric tolerance synthesis as multiple inverse problem of providing complex engineering system operability
von: Горошко, А. В., et al.
Veröffentlicht: (2014)

Parametric tolerance synthesis as multiple inverse problem of providing complex engineering system operability
von: Горошко, А. В., et al.
Veröffentlicht: (2014)

Vertical displacement monitoring technique using radar interferometry data
von: Orlenko, Tetiana
Veröffentlicht: (2023)

Mathematical modeling of contact interaction of stamp rigging elements
von: N. A. Djomina
Veröffentlicht: (2014)

Mathematical simulation of the stress-strain state of the winding of a closed magnetic system
von: Martynov, S.O., et al.
Veröffentlicht: (2022)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Thermal and Stress-Strain State of Cast Bodies of Control Valves of 200 MW Power Units
von: Chernousenko, O. Yu., et al.
Veröffentlicht: (2020)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

Comprehensive research of stress–strain state of full – scale spiral case of francis turbine РО400–B–450 as not concreted
von: Ровний, К. М., et al.
Veröffentlicht: (2015)

ВИДАЛЕННЯ НЕВИЗНАЧЕНОСТІ В РАМКАХ НАБЛИЖЕННЯ ІМОВІРНІСНОГО РОЗПОДІЛУ ПО АБРАЗИВНО-ДИФУЗІЙНІЙ МОДЕЛІ ОЦІНКИ ЗНОСУ ПО НАЙБІЛЬШ ОБМЕЖЕНОМУ ХАРАКТЕРУ РОЗПОДІЛУ
von: Romanyuk, Vadym Vasilevich, et al.
Veröffentlicht: (2012)

Deformational regimes and kinematic conditions of modern tectonic faulting within the limits of the Mountain Crimea. 2
von: Volfman, Yu.M.
Veröffentlicht: (2015)

Modeling the response of a planar silicon detector when measuring the exposure dose rate in the energy range from 5 keV to 10MeV
von: Dubina, V.N., et al.
Veröffentlicht: (2020)

IMMITATION MODEL OF A HYDRO TURBINE FOR COMPREHENSIVE MODELING OF HYDROELECTRIC POWER PLANT ELECTROMECHANICAL SYSTEM
von: Popovych, O., et al.
Veröffentlicht: (2023)

EXPERIMENTAL APPROBATION OF SHEET METAL MAGNETIC PERMEABILITY MEASUREMENT SYSTEMS
von: Chaplygin, E. A., et al.
Veröffentlicht: (2014)

Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018)

Numerical analysis of stress-strain state of vertical cylindrical oil tanks with dents
von: Buganova, S. N., et al.
Veröffentlicht: (2018)

Specific features of the application of cost form of the model of interproduct balance for determining the volume and price indicators of the development of energy sector and other branches of economy of the country
von: Kaplin M.I., et al.
Veröffentlicht: (2020)

MODERN INTERPRETATION OF THE PERGA CASSITERITE-COLUMBITE PLACER DEPOSIT GEOLOGICAL CONSTRUCTION
von: Galetskiy, L.S., et al.
Veröffentlicht: (2016)