The change of the coercive force under fatigue testing of 40X steel specimens
The influence of cyclic loading and subsequent surface plastic deformation on the change of the coercive force of normalized 40X steel specimens was studied. It was found that after a cyclic loading of specimens their coercive force increases by 1.5–2 times throughout entire range of loads used, wh...
Gespeichert in:
| Datum: | 2015 |
|---|---|
| Hauptverfasser: | Вакуленко, К. В., Казак, И. Б., Безлюдько, Г. Я., Ярещенко, В. Г., Елкина, Е. И. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України
2015
|
| Schlagworte: | |
| Online Zugang: | https://journals.uran.ua/jme/article/view/46688 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Journal of Mechanical Engineering |
Institution
Journal of Mechanical EngineeringÄhnliche Einträge
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)
Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016)
Features heating of steel shсh 15 under cyclic loading
von: Вакуленко, К. В.
Veröffentlicht: (2012)
von: Вакуленко, К. В.
Veröffentlicht: (2012)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)
Features heating of steel shсh 15 under cyclic loading
von: Вакуленко, К. В.
Veröffentlicht: (2012)
von: Вакуленко, К. В.
Veröffentlicht: (2012)
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)
Surface microhardness of stainless steel which are modified by ionic implantation
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)
von: Гончаров, Виталий Викторович
Veröffentlicht: (2014)
The structure-analytical method for definition of resonance frequencyes of oscillating systems
von: Божко, A. Е.
Veröffentlicht: (2016)
von: Божко, A. Е.
Veröffentlicht: (2016)
The structure-analytical method for definition of resonance frequencyes of oscillating systems
von: Божко, A. Е.
Veröffentlicht: (2016)
von: Божко, A. Е.
Veröffentlicht: (2016)
Performance multilayer coatings in different environments and under cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
Performance multilayer coatings in different environments and under cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
Investigation of vibrations of shafting turbine unit T-250/300-240 at drawdown of supports and instantaneous imbalance shafting
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
Investigation of vibrations of shafting turbine unit T-250/300-240 at drawdown of supports and instantaneous imbalance shafting
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
von: Гармаш, Н. Г.
Veröffentlicht: (2015)
Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)
Integrity of information in the systems of vibrations analysis and reliability of its selection
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)
von: Трохим, Г. Р., et al.
Veröffentlicht: (2016)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Methodology of operative estimation of damage a material of the turbine rotor at cyclic loading and creep
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Definition of the thermal and thermostressed states of turbine rotor in resource counter
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
von: Шульженко, М. Г., et al.
Veröffentlicht: (2016)
Restorative thermal treatment of shell parts of turbines during complex turbine reconstruction after continuous service
von: Любимов, А. А.
Veröffentlicht: (2016)
von: Любимов, А. А.
Veröffentlicht: (2016)
Restorative thermal treatment of shell parts of turbines during complex turbine reconstruction after continuous service
von: Любимов, А. А.
Veröffentlicht: (2016)
von: Любимов, А. А.
Veröffentlicht: (2016)
Influence of erosion on main operation features of the last stage movable blade of a low-pressure cylinder of a powerful steam turbine. Part 2. Prediction of vibration features of a movable blade of the last stage that change as a result of erosive wear a
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)
Influence of erosion on main operation features of the last stage movable blade of a low-pressure cylinder of a powerful steam turbine. Part 2. Prediction of vibration features of a movable blade of the last stage that change as a result of erosive wear a
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)
von: Шубенко, А. Л., et al.
Veröffentlicht: (2016)
The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
von: Ковальский, А. Э.
Veröffentlicht: (2016)
von: Ковальский, А. Э.
Veröffentlicht: (2016)
The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
von: Ковальский, А. Э.
Veröffentlicht: (2016)
von: Ковальский, А. Э.
Veröffentlicht: (2016)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)
Design Forecasting of Thermal Strength and Resource of Steam Turbine structural Components
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)
von: Shulzhenko, Nikolay G., et al.
Veröffentlicht: (2018)
Developing and investigating coating for protection from fretting-corrosion
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
Developing and investigating coating for protection from fretting-corrosion
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
von: Похмурський, В. І., et al.
Veröffentlicht: (2017)
Estimation of influence of interaction of carbon with compound of carbides, borides, nitrides, silicides on structure and properties of composites Diamond-Fe-Cu-Ni-Sn
von: Мечник, В. А.
Veröffentlicht: (2016)
von: Мечник, В. А.
Veröffentlicht: (2016)
Estimation of influence of interaction of carbon with compound of carbides, borides, nitrides, silicides on structure and properties of composites Diamond-Fe-Cu-Ni-Sn
von: Мечник, В. А.
Veröffentlicht: (2016)
von: Мечник, В. А.
Veröffentlicht: (2016)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
Modernization of an experimental installation and a procedure for investigating the anisotropic viscoelastic properties of composite materials at elevated temperatures
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
von: Martynenko, V. G., et al.
Veröffentlicht: (2018)
About healing of defects in metals during plastic deformation (analytical review)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2015)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2015)
About healing of defects in metals during plastic deformation (analytical review)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2015)
von: Мацевитый, Юрий Михайлович, et al.
Veröffentlicht: (2015)
POWERFUL SOURCES OF PULSE HIGH-FREQUENCY ELECTROMECHANICAL TRANSDUCERS FOR MEASUREMENT, TESTING AND DIAGNOSTICS
von: Plesnetsov, S. Yu., et al.
Veröffentlicht: (2018)
von: Plesnetsov, S. Yu., et al.
Veröffentlicht: (2018)
Ähnliche Einträge
-
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015) -
Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016) -
Some aspects of the heating of metal under cyclic loading
von: Мацевитый, В. М., et al.
Veröffentlicht: (2016) -
Features heating of steel shсh 15 under cyclic loading
von: Вакуленко, К. В.
Veröffentlicht: (2012) -
Acoustic emission investigation of crack propagation in Cr-Mo-V steels of different degradation degrees
von: Назарчук, З. Т., et al.
Veröffentlicht: (2016)