Micro-macro analysis of creep and damage behavior of multi-pass welds
Different zones of welded joints are subjected to different temperature fields during the process of welding. Furthermore, in multi-pass welding heating and cooling cycles, which occur due to the overlap of the pass beads, form complex microstructure. In this paper a method of evaluating creep respo...
Збережено в:
| Дата: | 2015 |
|---|---|
| Автори: | , , |
| Формат: | Стаття |
| Мова: | Ukrainian |
| Опубліковано: |
Journal of Mechanical Engineering
2015
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/48101 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Journal of Mechanical Engineering |
Репозитарії
Journal of Mechanical Engineering| Резюме: | Different zones of welded joints are subjected to different temperature fields during the process of welding. Furthermore, in multi-pass welding heating and cooling cycles, which occur due to the overlap of the pass beads, form complex microstructure. In this paper a method of evaluating creep response of the multi-pass weld based on the micro-macro mechanics approach is introduced. Multi-pass weld microstructure that consists from columnar, coarse-grained, and fine- grained zones is considered. Materials of these constituents assumed to be isotropic. Weld metal properties of inelastic behavior have general type of symmetry and are described by the anisot- ropic creep constitutive model. To model the microstructure of the multi-pass weld metal the representative volume elements (RVE’s) with different number of passes are created and analyzed with FEA software ABAQUS. Numerical tests on uniform loading of the RVE’s are performed. Creep material properties for equivalent weld material are found for welds with different number of passes. |
|---|