Buchumschlag

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics

The problems of increasing the accuracy of solution of geometrical inverse heat conduction problems are examined. It is shown that the presence of a priori information about unknown geometric characteristics results in additional limitations on unknown geometrical parameters. That allows appreciably...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2012
1. Verfasser:	Костиков, А. О.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2012
Schlagworte:	УДК 536.24
Online Zugang:	https://journals.uran.ua/jme/article/view/52815
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: Костиков, А. О.
Veröffentlicht: (2012)

Increasing the accuracy of solution of geometrical inverse heat conduction problems at the expense of a priori information about unknown geometric characteristics
von: A. O. Kostikov
Veröffentlicht: (2012)

Structural difference approach to mathematical modeling high heat exchange processes with unsteady heat transfer on the surface of constructive elements
von: Слесаренко, А. П., et al.
Veröffentlicht: (2016)

Structural difference approach to mathematical modeling high heat exchange processes with unsteady heat transfer on the surface of constructive elements
von: Слесаренко, А. П., et al.
Veröffentlicht: (2016)

Regional -structural modeling and identification of the high speed oscillating heat processes
von: Слесаренко, А. П., et al.
Veröffentlicht: (2013)

Regional -structural modeling and identification of the high speed oscillating heat processes
von: Слесаренко, А. П., et al.
Veröffentlicht: (2013)

The quick recovery of thermal loads by impact spectral functions method
von: Слесаренко, Анатолий Павлович, et al.
Veröffentlicht: (2013)

The quick recovery of thermal loads by impact spectral functions method
von: Слесаренко, Анатолий Павлович, et al.
Veröffentlicht: (2013)

Improvement of mathematical models of heat and mass transfer processes in hydrogen metal hydride systems
von: Чорна, Н. А.
Veröffentlicht: (2013)

Improvement of mathematical models of heat and mass transfer processes in hydrogen metal hydride systems
von: Чорна, Н. А.
Veröffentlicht: (2013)

To the Solution of Geometric Inverse Heat Conduction Problems
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2021)

To the Solution of Geometric Inverse Heat Conduction Problems
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2021)

To the Solution of Geometric Inverse Heat Conduction Problems
von: Yu. M. Matsevytyi, et al.
Veröffentlicht: (2021)

Multiparametric Identification of Several Thermophysical Characteristics by Solving the Internal Inverse Heat Conduction Problem
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2025)

Multiparametric Identification of Several Thermophysical Characteristics by Solving the Internal Inverse Heat Conduction Problem
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2025)

Influence of the Location of a Convector on the Distribution of the Room Temperature
von: Tsakanyan, O. S., et al.
Veröffentlicht: (2018)

Influence of the Location of a Convector on the Distribution of the Room Temperature
von: Tsakanyan, O. S., et al.
Veröffentlicht: (2018)

Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)

Heat and mass transfer in the heated from below free cylindrical elementary convection cell with a conical cavity bottom
von: Бозбей, Л. С., et al.
Veröffentlicht: (2016)

Modeling of the no dissipative heat transport in no classical medium
von: Немченко, К. Э., et al.
Veröffentlicht: (2016)

Modeling of the no dissipative heat transport in no classical medium
von: Немченко, К. Э., et al.
Veröffentlicht: (2016)

Accuracy and planning of the parametric identification of the heat propagation in technical objects. Part 1. Accuracy of the heat propagation identification
von: Симбирский, Д. Ф., et al.
Veröffentlicht: (2012)

Accuracy and planning of the parametric identification of the heat propagation in technical objects. Part 1. Accuracy of the heat propagation identification
von: Симбирский, Д. Ф., et al.
Veröffentlicht: (2012)

Solution to Non-stationary Inverse Heat Conduction Problems for Multi-layer Bodies, Based on Effective Search for the Regularization Parameter
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2019)

Solution to Non-stationary Inverse Heat Conduction Problems for Multi-layer Bodies, Based on Effective Search for the Regularization Parameter
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2019)

Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2019)

Highly Efficient Cogeneration Power Plant with Deep Regeneration Based on Air Brayton Cycle
von: Rusanov, Andrii V., et al.
Veröffentlicht: (2019)

To the solution of non-stationary nonlinear reverse problems of thermal conductivity
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2018)

To the solution of non-stationary nonlinear reverse problems of thermal conductivity
von: Мацевитый, Ю. М., et al.
Veröffentlicht: (2018)

To the problem of in-flight geometric calibration with use of unknown landmarks
von: A. I. Tkachenko
Veröffentlicht: (2014)

Perfection of the procedure of in-flight geometric calibration with use of unknown landmarks
von: A. I. Tkachenko
Veröffentlicht: (2017)

Modeling heat and mass exchange processes in metal-hydride installations
von: Chorna, N. A., et al.
Veröffentlicht: (2019)

Modeling heat and mass exchange processes in metal-hydride installations
von: Chorna, N. A., et al.
Veröffentlicht: (2019)

A combined algorithm of the in-flight geometric calibration using unknown landmarks
von: A. I. Tkachenko
Veröffentlicht: (2019)

INFLUENCE OF GEOMETRICAL PARAMETERS OF THE INDUCTOR AND ARMATURE ON THE INDICATORS OF A LINEAR PULSE ELECTROMECHANICAL CONVERTER OF AN ELECTRODYNAMIC TYPE
von: Bolyukh, V. F., et al.
Veröffentlicht: (2019)

Prospects of hydrogen energy conversion systems use for waste recovery of thermal secondary power resources in high-temperature heat technological complexes
von: Кошельнік, О. В., et al.
Veröffentlicht: (2014)

Prospects of hydrogen energy conversion systems use for waste recovery of thermal secondary power resources in high-temperature heat technological complexes
von: Кошельнік, О. В., et al.
Veröffentlicht: (2014)

Development of a Perspective Metal Hydride Energy Accumulation System Based on Fuel Cells for Wind Energetics
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2019)

Development of a Perspective Metal Hydride Energy Accumulation System Based on Fuel Cells for Wind Energetics
von: Matsevytyi, Yurii M., et al.
Veröffentlicht: (2019)

Geometrical approach to enactivism
von: A. V. Sharypin
Veröffentlicht: (2019)