An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow
Possibilities of application of numerical methods of gasdynamics (the package of ANSYS CFX- 11 is used), allowing on the basis of analysis of three-dimensional flow to design effective powerful steam turbines exhoust hoods, are examined. The worked out technique is tested using published data of tes...
Збережено в:
| Дата: | 2012 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
Journal of Mechanical Engineering
2012
|
| Теми: | |
| Онлайн доступ: | https://journals.uran.ua/jme/article/view/60234 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Journal of Mechanical Engineering |
Репозитарії
Journal of Mechanical Engineering| id |
journalsuranuajme-article-60234 |
|---|---|
| record_format |
ojs |
| spelling |
journalsuranuajme-article-602342016-03-01T08:18:14Z An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow Проектирование выходных патрубков мощных паровых турбин на основе вариантных расчетов трехмерного течения Адамсон, Д. А. Галаев, С. А. Кириллов, А. И. Рис, В. В. УДК 621.165 Possibilities of application of numerical methods of gasdynamics (the package of ANSYS CFX- 11 is used), allowing on the basis of analysis of three-dimensional flow to design effective powerful steam turbines exhoust hoods, are examined. The worked out technique is tested using published data of tests with the real exhoust hood of powerful steam turbine. Project data is presented about desined with application of offered technique the exhoust hood for the modernized steam turbine K-175/180-12,8, having three-stage low pressure cylinder and basement location of condenser. Рассматриваются возможности применения современных методов вычислительной гидродинамики (использован пакет ANSYS CFX -11), позволяющих на основе анализа трехмерного течения проектировать эффективные выходные патрубки (ВП). Разработанная методика подробно тестирована по опубликованным данным натурных испытаний ВП мощных паровых турбин. Приведены проектные данные о течении в спроектированном по предлагаемой методике ВП для модернизированной паровой турбины К - 175/180 - 12,8, имеющей трехступенчатый ЦНД и подвальное расположение конденсатора. Розглядаються можливості застосування сучасних методів обчислювальної гідродинаміки (використано пакет ANSYS CFX-11), що дозволяють на основі аналізу тривимірної течії проектувати ефективні вихідні патрубки (ВП) Розроблена методика детально протестована за опублікованими даними натурних випробувань ВП потужних парових турбін. Наведено проектні дані щодо течії в спроектованому за методикою, що пропонується, ВП для модернізованої парової турбіни К-175/180-12,8, яка має триступеневий циліндр низького тиску та підвальне розташування конденсатора. Journal of Mechanical Engineering Проблемы машиностроения Проблеми машинобудування 2012-09-28 Article Article application/pdf https://journals.uran.ua/jme/article/view/60234 Journal of Mechanical Engineering; Vol. 15 No. 3-4 (2012); 37-43 Проблемы машиностроения; Том 15 № 3-4 (2012); 37-43 Проблеми машинобудування; Том 15 № 3-4 (2012); 37-43 2709-2992 2709-2984 ru https://journals.uran.ua/jme/article/view/60234/56055 Copyright (c) 2016 Д. А. Адамсон, С. А. Галаев, А. И. Кириллов, В. В. Рис https://creativecommons.org/licenses/by-nd/4.0 |
| institution |
Journal of Mechanical Engineering |
| collection |
OJS |
| language |
Russian |
| topic |
УДК 621.165 |
| spellingShingle |
УДК 621.165 Адамсон, Д. А. Галаев, С. А. Кириллов, А. И. Рис, В. В. An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| topic_facet |
УДК 621.165 |
| format |
Article |
| author |
Адамсон, Д. А. Галаев, С. А. Кириллов, А. И. Рис, В. В. |
| author_facet |
Адамсон, Д. А. Галаев, С. А. Кириллов, А. И. Рис, В. В. |
| author_sort |
Адамсон, Д. А. |
| title |
An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_short |
An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_full |
An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_fullStr |
An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_full_unstemmed |
An exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_sort |
exhaust hood of the powerful steam turbine designing with application a numerical simulation of three-dimensional flow |
| title_alt |
Проектирование выходных патрубков мощных паровых турбин на основе вариантных расчетов трехмерного течения |
| description |
Possibilities of application of numerical methods of gasdynamics (the package of ANSYS CFX- 11 is used), allowing on the basis of analysis of three-dimensional flow to design effective powerful steam turbines exhoust hoods, are examined. The worked out technique is tested using published data of tests with the real exhoust hood of powerful steam turbine. Project data is presented about desined with application of offered technique the exhoust hood for the modernized steam turbine K-175/180-12,8, having three-stage low pressure cylinder and basement location of condenser. |
| publisher |
Journal of Mechanical Engineering |
| publishDate |
2012 |
| url |
https://journals.uran.ua/jme/article/view/60234 |
| work_keys_str_mv |
AT adamsonda anexhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT galaevsa anexhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT kirillovai anexhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT risvv anexhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT adamsonda proektirovanievyhodnyhpatrubkovmoŝnyhparovyhturbinnaosnovevariantnyhrasčetovtrehmernogotečeniâ AT galaevsa proektirovanievyhodnyhpatrubkovmoŝnyhparovyhturbinnaosnovevariantnyhrasčetovtrehmernogotečeniâ AT kirillovai proektirovanievyhodnyhpatrubkovmoŝnyhparovyhturbinnaosnovevariantnyhrasčetovtrehmernogotečeniâ AT risvv proektirovanievyhodnyhpatrubkovmoŝnyhparovyhturbinnaosnovevariantnyhrasčetovtrehmernogotečeniâ AT adamsonda exhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT galaevsa exhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT kirillovai exhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow AT risvv exhausthoodofthepowerfulsteamturbinedesigningwithapplicationanumericalsimulationofthreedimensionalflow |
| first_indexed |
2024-06-01T14:43:09Z |
| last_indexed |
2024-06-01T14:43:09Z |
| _version_ |
1800670270472585216 |