Calculation of structural collapse lever mechanisms taking into account the elastoplasticity

In this paper a calculation of the destruction of the finite-element models of structural linkages. In statically indeterminate structures exhaustion of the bearing capacity of an element does not cause the destruction of the whole system, because the remaining elements form an unchanging system. Li...

Full description

Saved in:

Bibliographic Details
Date:	2016
Main Authors:	Джолдасбеков, С. У., Темирбеков, Е. С.
Format:	Article
Language:	Russian
Published:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2016
Subjects:	УДК 621.01
Online Access:	https://journals.uran.ua/jme/article/view/67493
Tags:	Add Tag No Tags, Be the first to tag this record!
Journal Title:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Similar Items

Calculation of structural collapse lever mechanisms taking into account the elastoplasticity
by: Джолдасбеков, С. У., et al.
Published: (2016)

Justification design infinitely variable gear transmission
by: Иванов, К. С., et al.
Published: (2016)

Justification design infinitely variable gear transmission
by: Иванов, К. С., et al.
Published: (2016)

Calculation of structural collapse lever mechanisms taking into account the elastoplasticity
by: S. U. Dzholdasbekov, et al.
Published: (2012)

The structure-analytical method for definition of resonance frequencyes of oscillating systems
by: Божко, A. Е.
Published: (2016)

The structure-analytical method for definition of resonance frequencyes of oscillating systems
by: Божко, A. Е.
Published: (2016)

Оne mean for optimal plate heat exchanger calculation
by: Арсеньева, О. П., et al.
Published: (2016)

Оne mean for optimal plate heat exchanger calculation
by: Арсеньева, О. П., et al.
Published: (2016)

Calculation of plate heat exchanger with different channel types in one device
by: Хавин, Г. Л.
Published: (2016)

Calculation of plate heat exchanger with different channel types in one device
by: Хавин, Г. Л.
Published: (2016)

On oscillating in oscillating system Furie-singularisnal force
by: Божко, A. Е.
Published: (2016)

On oscillating in oscillating system Furie-singularisnal force
by: Божко, A. Е.
Published: (2016)

Optimal design the system of serial plate heat exchangers
by: Хавин, Г. Л.
Published: (2016)

Optimal design the system of serial plate heat exchangers
by: Хавин, Г. Л.
Published: (2016)

CALCULATION OF TRANSIENTS IN ELECTRICAL CIRCUITS WITH «INCORRECT» INITIAL CONDITIONS WITH THE HELP OF THE DUHAMEL INTEGRAL AND DISCONTINUOUS FUNCTIONS
by: Boev, V. M.
Published: (2018)

Automated calculation complex for analysis of operating regimes of turbo-installations of power and cogeneration plants
by: Дворников, А. А.
Published: (2016)

Automated calculation complex for analysis of operating regimes of turbo-installations of power and cogeneration plants
by: Дворников, А. А.
Published: (2016)

Calculation the length of the B-spline curve
by: Раисов, Ю. А., et al.
Published: (2016)

Calculation the length of the B-spline curve
by: Раисов, Ю. А., et al.
Published: (2016)

Расчет разрушения конструкций рычажных механизмов с учетом упругопластичности
by: Джолдасбеков, С.У., et al.
Published: (2012)

SYNTHESIS OF ACTIVE SCREENING SYSTEM OF MAGNETIC FIELD OF HIGH VOLTAGE POWER LINES OF DIFFERENT DESIGN TAKING INTO ACCOUNT SPATIAL AND TEMPORAL DISTRIBUTION OF MAGNETIC FIELD
by: Kuznetsov, B. I., et al.
Published: (2017)

Calculation of degassing networks taking into account the accumulation of the liquid phase
by: L. A. Novikov, et al.
Published: (2019)

Modeling of the no dissipative heat transport in no classical medium
by: Немченко, К. Э., et al.
Published: (2016)

Modeling of the no dissipative heat transport in no classical medium
by: Немченко, К. Э., et al.
Published: (2016)

The current accounts deficit of the balance of payments: assessment of the acceptable lever for Ukraine
by: S. A. Nikolaichuk, et al.
Published: (2010)

Residual stresses accounting in titanium alloys surface strengthening
by: Павленко, В. Н.
Published: (2016)

Residual stresses accounting in titanium alloys surface strengthening
by: Павленко, В. Н.
Published: (2016)

Installation for researches of assemblies of microhydroelectric power station
by: Дедков, В. Н., et al.
Published: (2012)

Installation for researches of assemblies of microhydroelectric power station
by: Дедков, В. Н., et al.
Published: (2012)

IMPROVED ALGORITHM FOR CALCULATING COMPLEX NON-EQUIPOTENTIAL GROUNDING DEVICES OF ELECTRICAL INSTALLATIONS TAKING INTO ACCOUNT CONDUCTIVITY OF NATURAL GROUNDINGS
by: Starkov, K. A., et al.
Published: (2017)

SUPERCONDUCTIVITY AND MEASUREMENT OF EXTERNAL MAGNETIC FIELDS OF ELECTRICAL EQUIPMENT. PART 2. CIRCUITS AND MEASURING TECHNOLOGY
by: Boev, V. M.
Published: (2013)

On the instability of an elastoplastic disk
by: D. M. Lila
Published: (2014)

The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
by: Ковальский, А. Э.
Published: (2016)

The method of calculating breaking capacity of a last stage rotor wheel of a powerful steam turbine by the derived condensed moisture
by: Ковальский, А. Э.
Published: (2016)

PROTECTION OF HOUSEHOLD APPLIANCES INDUCTION MOTORS AGAINST OVERCURRENT TAKING INTO ACCOUNT NONLINEAR DISTORTION OF PHASE CURRENT
by: Sereda, O. G., et al.
Published: (2015)

Aerodynamic optimisation of turbomachinery bladings: approaches, methods, results
by: Ершов, С. В., et al.
Published: (2012)

Aerodynamic optimisation of turbomachinery bladings: approaches, methods, results
by: Ершов, С. В., et al.
Published: (2012)

The research of the stress-strain state of the losk joint of the operating blades
by: Швецов, В. Л., et al.
Published: (2012)

The research of the stress-strain state of the losk joint of the operating blades
by: Швецов, В. Л., et al.
Published: (2012)

Specificity of rubber-metal elements calculation with taking into account effect of bulk compression
by: V. I. Dyrda, et al.
Published: (2018)