Unified structure of the precision high-speed energy system and resource-saving automatic control and regulation

• Дата: 2016
• Автори: Канюк, Г. И., Бабенко, И. А., Мезеря, А. Ю., Козлова, М. Л., Сук, И. В., Сердюк, А. В.
• Формат: Стаття
• Мова: Russian
• Опубліковано: Journal of Mechanical Engineering 2016
• Теми: mechatronic systems; resource saving; electro-hydraulic servo system; electrohydraulic drive; automatic control system; УДК 621.311; мехатронные системы; ресурсосбережение; электрогидравлическая следящая система; электрогидравлический привод; система автоматизированного управления; термовауукумна установка; буре вугілля; нанодисперсний порошок; якість; екологія
• Онлайн доступ: https://journals.uran.ua/jme/article/view/71889
• Назва журналу: Journal of Mechanical Engineering

It is considered one of the main problems of saving energy and resources, namely the creation and introduction of new efficient technologies and technological systems in all fields of technology and industry. As a solution to this problem is proposed use of mechatronic systems with electrohydraulic servo actuators (EHSA), which are currently considered as electro-hydraulic servo system (EGSS). Their use is justified by the fact that they combine a high specific energy characteristics of the electro-hydraulic mechanisms with intelligent control and information capabilities of microprocessor electronics and allow a high degree of accuracy and speed of playback control actions, that vary in the an arbitrary, including and previously unknown laws. The algorithm for selecting the optimal circuit design of electrohydraulic drive EHD. On the basis of this algorithm is chosen the most effective typical version of the concept for use in high-speed precision EGSS - EHD single-channel version with separate volume-throttle speed control. With the direct participation of the author of this paper conducted a cycle of research and development activities in the course of which two sizes of part-turn hydraulic motors have been created. Challenge definition of introducing energy-saving of automatic systems of technological objects and processes. It is proposed as an effective management solution, based on the methods of system analysis and mathematical modeling