Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant

Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant

One of the priority directions of development of hydropower engineering in Ukraine is the rehabilitation of obsolescent and worn-out hydropower equipment for hydro power plant, served for 40-50 years. The major concerns of hydro power plant reconstruction are time extension of its operation, capacit...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Datum:	2016
Hauptverfasser:	Линник, А. В., Рябова, С. А., Варенко, В. Д., Рябов, А. В., Хорев, О. Н.
Format:	Artikel
Sprache:	Russian
Veröffentlicht:	Інститут енергетичних машин і систем ім. А. М. Підгорного Національної академії наук України 2016
Schlagworte:	Kaplan turbine the flow part multipurpose power and cavitation test facility model tests runner
Online Zugang:	https://journals.uran.ua/jme/article/view/78778
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Journal of Mechanical Engineering

Institution

Journal of Mechanical Engineering

Ähnliche Einträge

Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of kremenchug hydro power plant
von: Линник, А. В., et al.
Veröffentlicht: (2016)

Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
von: Линник, А. В., et al.
Veröffentlicht: (2014)

Test rig of OJSC «Turboatom» for physical simulation of hydrodynamic process in water passages of model Kaplan hydroturbines
von: Линник, А. В., et al.
Veröffentlicht: (2014)

Computational and experimental investigations of flow parts PL20 for rehabilitation of hydraulic turbines of Kremenchug hydro power plant
von: A. V. Linnik, et al.
Veröffentlicht: (2016)

An approach for software white box testing with genetic algorithm
von: Slabospickaya, O.A., et al.
Veröffentlicht: (2018)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

Measurement of a torque at the Kaplan turbine model runner blade using wireless telemetry
von: Веремеенко, И. С., et al.
Veröffentlicht: (2014)

On a problem of high-precision trajectory measurements by optical means
von: Putyatin, V. G., et al.
Veröffentlicht: (2017)

Using the interpolation-analytical approximation of the Iapws-95 equations in the flow calculation of the steam turbine flow part
von: Русанов, Андрей Викторович, et al.
Veröffentlicht: (2015)

Using the interpolation-analytical approximation of the Iapws-95 equations in the flow calculation of the steam turbine flow part
von: Русанов, Андрей Викторович, et al.
Veröffentlicht: (2015)

About a system approach to the development and ground tests of on-board automated naval complexes for detection and target designation
von: Dodonov, A. G., et al.
Veröffentlicht: (2017)

Ensuring the normalization of the aero-ionic regime in production areas by means of ultrasonic air ionization
von: Sukach, Serhii V., et al.
Veröffentlicht: (2024)

ENERGY EFFICIENCY OF WIND-HYDRO PUMPING STATION SIGNIFICANT POWER
von: Vasko, P., et al.
Veröffentlicht: (2020)

Efficient increasing of the mutation score during model-based test suite generation
von: Kolchin, A., et al.
Veröffentlicht: (2020)

THE EFFECT OF THE ACTIVE RESISTANCE OF THE PULSE TRANSFORMER WINDINGS ON THE PARAMETERS OF VOLTAGE PULSES GENERATED ON A CAPACITIVE LOAD
von: Gurin, A. G., et al.
Veröffentlicht: (2019)

Prediction of lifetime of data storage on optical disks
von: Petrov, V. V., et al.
Veröffentlicht: (2016)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. II. Methodological Approach to Design Modular Turbo-Compressor Packages for CS of Gas Industry
von: Парафейник, В. П., et al.
Veröffentlicht: (2017)

Selection of System Characteristic of Turbo-Compressor Package Based on Efficiency Analysis according to Full-Scale Test Results. P. II. Methodological Approach to Design Modular Turbo-Compressor Packages for CS of Gas Industry
von: Парафейник, В. П., et al.
Veröffentlicht: (2017)

MODELING DYNAMICS LOADING MODES WORK OF THE HYDRO-PUMP STATION WITH THE ELECTRIC DRIVE FROM POWER SUPPLY OF THE WIND ELECTRIC INSTALLATION WITH THE SYNCHRONOUS GENERATOR
von: Vasko, P., et al.
Veröffentlicht: (2020)

Improving the efficiency of radial-axial rotors of turbine stages through the use of complex lean of trailing edges
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

Improving the efficiency of radial-axial rotors of turbine stages through the use of complex lean of trailing edges
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

HEAT TESTS OF POWER CABLES WITH XLPE INSULATION AT DIRECT VOLTAGES UP TO 110 KV
von: Antonets, T. Yu., et al.
Veröffentlicht: (2015)

Developing algorithms for automatic hypoxing test chasing from the single-channel electrocardiograms: a model experiment
von: Romanenko, T.M.
Veröffentlicht: (2024)

Features on realization of measurement system for geophysical metrological vibration platform based on the laser digital interferometry
von: Kosyak, I. V., et al.
Veröffentlicht: (2015)

Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

Analytical method for profiling of radial stator blades of turbine stages
von: Rusanov, R. A., et al.
Veröffentlicht: (2016)

Calculation and experimental research of influence of vapor ionization on the parameters of wet steam flow in supersonic nozzle
von: Тарелин, А. А., et al.
Veröffentlicht: (2016)

Calculation and experimental research of influence of vapor ionization on the parameters of wet steam flow in supersonic nozzle
von: Тарелин, А. А., et al.
Veröffentlicht: (2016)

Solving a Direct Problem in Order to Predict Flow Conditions in Hydraulic Passages
von: Давиденко, А. К.
Veröffentlicht: (2015)

Solving a Direct Problem in Order to Predict Flow Conditions in Hydraulic Passages
von: Давиденко, А. К.
Veröffentlicht: (2015)

A method for business logic extraction from legacy COBOL code of industrial systems
von: Guba, A.A., et al.
Veröffentlicht: (2018)

Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)

Computer-aided Design of Centrifugal Pump Hydraulics
von: Косторной, А. С.
Veröffentlicht: (2015)

Еstimation of integrated characteristics of materials of rail concrete structures by the method of surface wave
von: Vusatiuk, A.Ye., et al.
Veröffentlicht: (2018)

EFFECT OF GEOMETRICAL PARAMETERS OF PUMP-TURBINE RUNNERS ON ENERGY CHARACTERISTICS
von: Khoryev , O., et al.
Veröffentlicht: (2025)

Hydraulic pumps utilization features in turbine modes for small hydro power
von: I. M. Holovanov
Veröffentlicht: (2012)

MAGNETIC-PULSE PRESSING OF ELECTRICAL CONNECTIONS FOR STRANDED WIRES
von: Samokhvalova, Zh. V., et al.
Veröffentlicht: (2019)

ONLINE TECHNOLOGICAL MONITORING OF INSULATION DEFECTS IN ENAMELED WIRES
von: Zolotaryov, V. M., et al.
Veröffentlicht: (2017)

Software development for contextual advertising of listings in the real estate domain
von: Hromenko, V.V.
Veröffentlicht: (2024)

Расчетные и экспериментальные исследования проточных частей ПЛ20 для модернизации гидротурбин Кременчугской гидроэлектростанции
von: Линник, А.В., et al.
Veröffentlicht: (2016)