Modeling of Explosive Processes in Anisotropic Media where Boundary of the Influence Region is Identified
Nowadays, explosive processes are widely used for the optimization of extraction minerals processes, in the buildings construction and industry. This practice allows to significantly increase the speed of the work and, at the same time, reduce it cost. However, side effects of the explosion usage ca...
Збережено в:
Видавець: | Kamianets-Podilskyi National Ivan Ohiienko University |
---|---|
Дата: | 2018 |
Автори: | Bomba, Andrey, Malash, Kateryna |
Формат: | Стаття |
Мова: | English |
Опубліковано: |
Kamianets-Podilskyi National Ivan Ohiienko University
2018
|
Онлайн доступ: | http://mcm-tech.kpnu.edu.ua/article/view/158653 |
Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
Репозиторії
Mathematical and computer modelling. Series: Technical sciencesСхожі ресурси
-
Modeling of Explosive Processes in Anisotropic Media where Boundary of the Influence Region is Identified
за авторством: Bomba, A., та інші
Опубліковано: (2018) -
Modeling of Explosive Processes in Anisotropic Media where Boundary of the Influence Region is Identified
за авторством: A. Bomba, та інші
Опубліковано: (2018) -
Application of modified boundary element method to elasticity problems of piecewise-homogeneous anisotropic media
за авторством: M. V. Lavreniuk
Опубліковано: (2013) -
The Solution of the Inverse Problem of Identifying the Thermal Conductivity Tensor in Anisotropic Materials
за авторством: Мацевитый, Ю. М., та інші
Опубліковано: (2021) -
The Solution of the Inverse Problem of Identifying the Thermal Conductivity Tensor in Anisotropic Materials
за авторством: Yu. M. Matsevytyi, та інші
Опубліковано: (2021)