Особливості розрахунку спотворення сигналу в електронній системі
The preence of interfering loads in low, medium, and high voltage networks leads to an increase in harmonic distortion and asymmetry of transmission levels. Economic reasons make it difficult to install harmonic measurement devices throughout the entire system. Instead, harmonic measurement equipmen...
Збережено в:
| Дата: | 2025 |
|---|---|
| Автори: | , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Kamianets-Podilskyi National Ivan Ohiienko University
2025
|
| Онлайн доступ: | http://mcm-tech.kpnu.edu.ua/article/view/347633 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Mathematical and computer modelling. Series: Technical sciences |
Репозитарії
Mathematical and computer modelling. Series: Technical sciences| _version_ | 1856543291708801024 |
|---|---|
| author | Заячук, Ігор Благітко, Богдан |
| author_facet | Заячук, Ігор Благітко, Богдан |
| author_sort | Заячук, Ігор |
| baseUrl_str | |
| collection | OJS |
| datestamp_date | 2025-12-23T08:00:12Z |
| description | The preence of interfering loads in low, medium, and high voltage networks leads to an increase in harmonic distortion and asymmetry of transmission levels. Economic reasons make it difficult to install harmonic measurement devices throughout the entire system. Instead, harmonic measurement equipment could be installed in selected sections of the network, covering only a fraction of the blocks. These devices can then be used to estimate harmonic current injection. This article presents a method to determine the optimal parameters for installing harmonic voltage measurement devices. A key characteristic of programs for calculating the harmonic coefficient is the sensitivity threshold, which is primarily determined by rounding errors. A numerical experiment was conducted to analyze the dependence of the harmonic distortion coefficient on the parameters of the computational process. Based on the ADC configuration, the device's limitations for experimentally determining the harmonic distortion coefficient are simulated. The error that occurs due to rounding when determining the harmonic coefficient of a function is also investigated. For a given number of digits ADC, the value of the sensitivity threshold for the harmonic coefficient significantly exceeds the analytically obtained value of the absolute error |
| first_indexed | 2026-02-08T08:00:54Z |
| format | Article |
| id | mcmtechkpnueduua-article-347633 |
| institution | Mathematical and computer modelling. Series: Technical sciences |
| language | English |
| last_indexed | 2026-02-08T08:00:54Z |
| publishDate | 2025 |
| publisher | Kamianets-Podilskyi National Ivan Ohiienko University |
| record_format | ojs |
| spelling | mcmtechkpnueduua-article-3476332025-12-23T08:00:12Z Features of Calculating the Signal’s Distortion in an Electronic System Особливості розрахунку спотворення сигналу в електронній системі Заячук, Ігор Благітко, Богдан The preence of interfering loads in low, medium, and high voltage networks leads to an increase in harmonic distortion and asymmetry of transmission levels. Economic reasons make it difficult to install harmonic measurement devices throughout the entire system. Instead, harmonic measurement equipment could be installed in selected sections of the network, covering only a fraction of the blocks. These devices can then be used to estimate harmonic current injection. This article presents a method to determine the optimal parameters for installing harmonic voltage measurement devices. A key characteristic of programs for calculating the harmonic coefficient is the sensitivity threshold, which is primarily determined by rounding errors. A numerical experiment was conducted to analyze the dependence of the harmonic distortion coefficient on the parameters of the computational process. Based on the ADC configuration, the device's limitations for experimentally determining the harmonic distortion coefficient are simulated. The error that occurs due to rounding when determining the harmonic coefficient of a function is also investigated. For a given number of digits ADC, the value of the sensitivity threshold for the harmonic coefficient significantly exceeds the analytically obtained value of the absolute error Наявність заважаючих навантажень у мережах низької, середньої та високої напруги призводить до збільшення гармонійних спотворень та асиметрії рівнів передачі. Економічні причини ускладнюють встановлення приладів вимірювання гармонік по всій системі. Натомість, обладнання для вимірювання гармонік можна встановити на окремих ділянках мережі, охоплюючи лише частину блоків. Ці пристрої потім можна використовувати для оцінки інжекції струму гармонік. У цій статті представлено метод визначення оптимальних параметрів для встановлення приладів вимірювання гармонійної напруги. Ключовою характеристикою програм для розрахунку гармонічного коефіцієнта є поріг чутливості, який в першу чергу визначається помилками округлення. Було проведено числовий експеримент для аналізу залежності коефіцієнта гармонійних спотворень від параметрів обчислювального процесу. На основі конфігурації АЦП моделюються обмеження пристрою для експериментального визначення коефіцієнта гармонійних спотворень. Також досліджується похибка, що виникає через округлення під час визначення гармонічного коефіцієнта функції. Для заданої кількості розрядів АЦП значення порогу чутливості для коефіцієнта гармоніки значно перевищує аналітично отримане значення абсолютної похибки Kamianets-Podilskyi National Ivan Ohiienko University 2025-11-29 Article Article application/pdf http://mcm-tech.kpnu.edu.ua/article/view/347633 10.32626/2308-5916.2025-28.22-27 Mathematical and computer modelling. Series: Technical sciences; 2025: Mathematical and computer modelling. Series: Technical sciences. Issue 28; 22-27 Математичне та комп'ютерне моделювання. Серія: Технічні науки ; 2025: Математичне та комп'ютерне моделювання. Серія: Технічні науки. Випуск 28; 22-27 2308-5916 10.32626/2308-5916.2025-28 en http://mcm-tech.kpnu.edu.ua/article/view/347633/336433 Авторське право (c) 2025 Математичне та комп'ютерне моделювання. Серія: Технічні науки |
| spellingShingle | Заячук, Ігор Благітко, Богдан Особливості розрахунку спотворення сигналу в електронній системі |
| title | Особливості розрахунку спотворення сигналу в електронній системі |
| title_alt | Features of Calculating the Signal’s Distortion in an Electronic System |
| title_full | Особливості розрахунку спотворення сигналу в електронній системі |
| title_fullStr | Особливості розрахунку спотворення сигналу в електронній системі |
| title_full_unstemmed | Особливості розрахунку спотворення сигналу в електронній системі |
| title_short | Особливості розрахунку спотворення сигналу в електронній системі |
| title_sort | особливості розрахунку спотворення сигналу в електронній системі |
| url | http://mcm-tech.kpnu.edu.ua/article/view/347633 |
| work_keys_str_mv | AT zaâčukígor featuresofcalculatingthesignalsdistortioninanelectronicsystem AT blagítkobogdan featuresofcalculatingthesignalsdistortioninanelectronicsystem AT zaâčukígor osoblivostírozrahunkuspotvorennâsignaluvelektronníjsistemí AT blagítkobogdan osoblivostírozrahunkuspotvorennâsignaluvelektronníjsistemí |