Микросварка фольги из нержавеющей стали высокоскоростным лазерным сканированием
The characteristics of micro-welding for thin stainless steel foil were investigated using high speed laser scanning with both single-mode fiber laser and pulsed Nd: YAG laser. The overlap welding of 25 m thickness sheet could be successfully performed using a laser beam with a small focus diamete...
Збережено в:
| Дата: | 2008 |
|---|---|
| Автори: | , , , , |
| Формат: | Стаття |
| Мова: | Russian |
| Опубліковано: |
Інститут електрозварювання ім. Є.О. Патона НАН України
2008
|
| Назва видання: | Автоматическая сварка |
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/100058 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Микросварка фольги из нержавеющей стали высокоскоростным лазерным сканированием / Я. Окамото, А. Гильнер, А. Оловинский, Дж. Гендрикс, Й. Уно // Автоматическая сварка. — 2008. — № 11 (667). — С. 181-186. — Бібліогр.: 10 назв. — рос. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | The characteristics of micro-welding for thin stainless steel foil were investigated using high speed laser scanning with
both single-mode fiber laser and pulsed Nd: YAG laser. The overlap welding of 25 m thickness sheet could be
successfully performed using a laser beam with a small focus diameter, regardless of the presence of a small gap between
two sheets. |
|---|