Hydrogen Sorption Properties of Ti₀,₄₇₅Zr₀,₃Mn₀,₂₂₅ Eutectic Alloy Alloyed with 2 at.% and 5 at.% of Vanadium

• Дата: 2015
• Автори: Ivanchenko, V.G., Dekhtyarenko, V.A., Pryadko, T.V.
• Формат: Стаття
• Мова: English
• Опубліковано: Інститут металофізики ім. Г.В. Курдюмова НАН України 2015
• Назва видання: Металлофизика и новейшие технологии
• Теми: Дефекты кристаллической решётки
• Онлайн доступ: https://nasplib.isofts.kiev.ua/handle/123456789/111891
• Назва журналу: Digital Library of Periodicals of National Academy of Sciences of Ukraine
• Цитувати: Hydrogen Sorption Properties of Ti₀,₄₇₅Zr₀,₃Mn₀,₂₂₅ Eutectic Alloy Alloyed with 2 at.% and 5 at.% of Vanadium / V. G. Ivanchenko, V. A. Dekhtyarenko, T. V. Pryadko // Металлофизика и новейшие технологии. — 2015. — Т. 37, № 4. — С. 521-530. — Бібліогр.: 16 назв. — рос.

Sorption properties and kinetic parameters of hydrogenating and dehydrogenating processes of Ti₀,₄₇₅Zr₀,₃Mn₀,₂₂₅ eutectic alloy, in which partial substitution of each of its component with 2% and 5% of vanadium is performed, are investigated by Sieverts’ method. As determined, the introduction of vanadium within the specified limits results in decrease of the temperature of the start of intensive hydrogen absorption, decrease of the duration of hydrogenating process, and also in substantial increase of sorption capacity (up to 2.85% wt.). As shown, the alloys, which are subjected to the sorption—desorption cycling, possess as much activated surface that behave themselves with regard to hydrogen similar to intermetallic compounds and can absorb hydrogen at the room temperature and the pressure of 0.23 MPa from the first seconds of the contact of the specimen with the hydrogen-containing medium with the average rate of (2—4)∙10³ wt.%/s.