Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
Brittle nature and poor resistance in front of vibrational waves despite of good mechanical strength have limited widespread use of epoxy resins in industry. In current study a new combination of thermoplastic and particulate nanofiller is used as modifier to enhance simultaneously tensile strengths...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2013 |
| Hauptverfasser: | Rostamiyan, Y., Fereidoon, A.B. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2013
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/112651 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths / Y. Rostamiyan, A.B. Fereidoon // Проблемы прочности. — 2013. — № 5. — С. 146-165. — Бібліогр.: 47 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)
Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/H I PN/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 2. Studies on Flexural, Compression, and Impact Strength
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013)
Modeling and Analysis of the Tensile and Flexural Properties of a FiberOrientated Hybrid Nanocomposite Using Taguchi Methodology
von: Rostamiyan, Y.
Veröffentlicht: (2015)
von: Rostamiyan, Y.
Veröffentlicht: (2015)
Thermal destruction of epoxy fumed silica nanocomposites
von: N. V. Sigareva, et al.
Veröffentlicht: (2013)
von: N. V. Sigareva, et al.
Veröffentlicht: (2013)
Synthesis of hybrid nanocomposites based on organically modified silica gel
von: O. V. Slisenko, et al.
Veröffentlicht: (2013)
von: O. V. Slisenko, et al.
Veröffentlicht: (2013)
Epoxy polyurethane nanocomposites filled with fullerite
von: R. A. Rozhnova, et al.
Veröffentlicht: (2015)
von: R. A. Rozhnova, et al.
Veröffentlicht: (2015)
Tensile strength of the brittle materials, probabilistic or deterministic approach?
von: Jeong, J., et al.
Veröffentlicht: (2006)
von: Jeong, J., et al.
Veröffentlicht: (2006)
Analysis of the influence of the nature of the filler surface on the properties of hybrid organic-inorganic nanocomposites based on epoxy oligomer
von: V. D. Myshak, et al.
Veröffentlicht: (2021)
von: V. D. Myshak, et al.
Veröffentlicht: (2021)
Reinforcement of epoxy polymers with hydride-silylated fumed silica
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
Thermal destruction of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2013)
von: A. A. Lugovaja, et al.
Veröffentlicht: (2013)
Chemical overlap welding of epoxy vitremers and their nanocomposites
von: A. V. Vashchuk, et al.
Veröffentlicht: (2022)
von: A. V. Vashchuk, et al.
Veröffentlicht: (2022)
Thermophysical properties of epoxy-polysiloxane antifriction nanocomposite
von: V. S. Gavrilova, et al.
Veröffentlicht: (2016)
von: V. S. Gavrilova, et al.
Veröffentlicht: (2016)
Investigation of influence of plasticity materials on tensile strength of the composite joint
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)
von: M. V. Dudyk, et al.
Veröffentlicht: (2013)
Hybrid composites prepared by carbonization of acetylacetone and metal acetylacetonates on a surface of silica gel
von: V. M. Gunko, et al.
Veröffentlicht: (2022)
von: V. M. Gunko, et al.
Veröffentlicht: (2022)
Viscoelastic and thermal properties of epoxy polymers and epoxy-silica composites cured with anhydride in the presence of metal acetylacetonates
von: A. A. Lugovaja, et al.
Veröffentlicht: (2012)
von: A. A. Lugovaja, et al.
Veröffentlicht: (2012)
Influence of functionalized silica based compounds on kinetics curing of epoxy
von: M. H. Tkalich, et al.
Veröffentlicht: (2014)
von: M. H. Tkalich, et al.
Veröffentlicht: (2014)
Laboratory facility for testing of hip joint endoprosthesis
von: V. V. Lashneva, et al.
Veröffentlicht: (2015)
von: V. V. Lashneva, et al.
Veröffentlicht: (2015)
Experimental-Numerical Study of Tensile Strength of the High-Strength Steel S690QL at Elevated Temperatures
von: Arsić, D., et al.
Veröffentlicht: (2016)
von: Arsić, D., et al.
Veröffentlicht: (2016)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)
von: He, X., et al.
Veröffentlicht: (2013)
The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: X. He, et al.
Veröffentlicht: (2013)
von: X. He, et al.
Veröffentlicht: (2013)
Comparison of the synthesis routes for the ZnO/porous silica nanocomposite
von: Rudko, G.Yu., et al.
Veröffentlicht: (2016)
von: Rudko, G.Yu., et al.
Veröffentlicht: (2016)
Dynamic mechanical properties and structure of epoxy-silica composites of cationic polymerization
von: N. H. Leonova, et al.
Veröffentlicht: (2014)
von: N. H. Leonova, et al.
Veröffentlicht: (2014)
Chemical welding of nanocomposites based on epoxy resin and oxidized graphene
von: A. V. Vashchuk, et al.
Veröffentlicht: (2022)
von: A. V. Vashchuk, et al.
Veröffentlicht: (2022)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: Fan, X.L., et al.
Veröffentlicht: (2014)
von: Fan, X.L., et al.
Veröffentlicht: (2014)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
Experimental Investigation on the Tensile Strength of Composite Laminates Containing Open and Filled Holes
von: X. L. Fan, et al.
Veröffentlicht: (2014)
von: X. L. Fan, et al.
Veröffentlicht: (2014)
Progressive Failure Analysis of Glass/Epoxy Composites at Low Temperatures
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)
The role of the reference temperature in the construction of generalized viscoelastic functions for predicting damping properties of epoxy polymer
von: N. V. Babkina, et al.
Veröffentlicht: (2015)
von: N. V. Babkina, et al.
Veröffentlicht: (2015)
Investigation of the formation of the epoxy-polysiyloxane nanocomposit structure by the infrared spectroscopy method
von: V. S. Havrylova, et al.
Veröffentlicht: (2018)
von: V. S. Havrylova, et al.
Veröffentlicht: (2018)
The influence of ultrasonic treatment on the physical, mechanical and thermal properties of epoxy nanocomposites
von: A. V. Buketov, et al.
Veröffentlicht: (2013)
von: A. V. Buketov, et al.
Veröffentlicht: (2013)
Effect of epoxy functionalized POSS on thermal stability of polycyanurate based nanocomposites
von: O. N. Starostenko, et al.
Veröffentlicht: (2014)
von: O. N. Starostenko, et al.
Veröffentlicht: (2014)
Adsorption of doxorubicin by fumed silica and magnetite/siloxane nanocomposites
von: A. L. Petranovska, et al.
Veröffentlicht: (2015)
von: A. L. Petranovska, et al.
Veröffentlicht: (2015)
Resistance of epoxy-silica composites to influence of aggressive environment and anticorrosive properties of coatings on their basis
von: R. I. Lyga, et al.
Veröffentlicht: (2014)
von: R. I. Lyga, et al.
Veröffentlicht: (2014)
The influence of filler dispersion on adhesion strength and residual pressure in epoxy composites
von: A. V. Buketov, et al.
Veröffentlicht: (2012)
von: A. V. Buketov, et al.
Veröffentlicht: (2012)
Comparison of the synthesis routes for the ZnO/porous silica nanocomposite
von: Yu. Rudko, et al.
Veröffentlicht: (2016)
von: Yu. Rudko, et al.
Veröffentlicht: (2016)
Synthesis and properties of nanocomposites based onzinc phosphate and fumed silica
von: V. M. Bohatyrov, et al.
Veröffentlicht: (2020)
von: V. M. Bohatyrov, et al.
Veröffentlicht: (2020)
A New Method for Evaluation of Mechanical Properties of Glass/Epoxy Composites at Low Temperatures
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)
von: Shokrieh, M.M., et al.
Veröffentlicht: (2012)
Cetyltrimethylammonium chloride influence on silica optical fiber strength
von: El Abdi, R., et al.
Veröffentlicht: (2013)
von: El Abdi, R., et al.
Veröffentlicht: (2013)
Complex standardization of silica–multiherbal nanodispersed Phytosil preparations
von: N. O. Lipkovska, et al.
Veröffentlicht: (2017)
von: N. O. Lipkovska, et al.
Veröffentlicht: (2017)
Structure, thermophysical properties and electrical conductivity of nanocomposites based on epoxy polymer and carbon tubes
von: V. V. Korskanov, et al.
Veröffentlicht: (2021)
von: V. V. Korskanov, et al.
Veröffentlicht: (2021)
Ähnliche Einträge
-
Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013) -
Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/H I PN/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 2. Studies on Flexural, Compression, and Impact Strength
von: Y. Rostamiyan, et al.
Veröffentlicht: (2013) -
Modeling and Analysis of the Tensile and Flexural Properties of a FiberOrientated Hybrid Nanocomposite Using Taguchi Methodology
von: Rostamiyan, Y.
Veröffentlicht: (2015) -
Thermal destruction of epoxy fumed silica nanocomposites
von: N. V. Sigareva, et al.
Veröffentlicht: (2013) -
Synthesis of hybrid nanocomposites based on organically modified silica gel
von: O. V. Slisenko, et al.
Veröffentlicht: (2013)