Buchumschlag

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars

In this study, analytical and numerical investigations were extensively conducted to evaluate the flexural behavior of concrete beams reinforced with aramid fiber-reinforced polymer (AFRP) rebars. The AFRP-reinforced concrete beams were analyzed using the separated finite element method contai...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Проблемы прочности
Datum:	2013
Hauptverfasser:	Buyukkaragoz, A., Kalkan, I., Lee, J.H.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Інститут проблем міцності ім. Г.С. Писаренко НАН України 2013
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/112671
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars / A. Buyukkaragoz, I. Kalkan, J.H. Lee // Проблемы прочности. — 2013. — № 6. — С. 112-129. — Бібліогр.: 43 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: A. Buyukkaragoz, et al.
Veröffentlicht: (2013)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: G. Vasudevan, et al.
Veröffentlicht: (2013)

Numerical Simulation of the Damage Behavior of a Concrete Beam with an Anisotropic Damage Model
von: Long, Y.C., et al.
Veröffentlicht: (2018)

Crack Identification in Reinforced Concrete Beams Using ANSYS Software
von: Dahmani, L., et al.
Veröffentlicht: (2010)

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)

Flexural Fatigue Behavior of Cross-Ply Laminates: An Experimental Approach
von: Bezazi, A.R., et al.
Veröffentlicht: (2003)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: Lee, J.Y., et al.
Veröffentlicht: (2014)

Analytical Analysis of the Interfacial Stress in Damaged Reinforced Concrete Beams Strengthened by Bonded Composite Plates
von: Hassaine Daouadji, T.
Veröffentlicht: (2013)

Flexural Fracture Toughness and First-Crack Strength Tests of Steel Fiber-Silica Fume Concrete and Its Engineering Applications
von: Zhang, J.P., et al.
Veröffentlicht: (2018)

On the Shear-Deformation Theories for the Analysis of Concrete Shells Reinforced with External Composite Laminates
von: Ferreira, A. J. M.
Veröffentlicht: (2003)

Numerical simulation of brittle damage in concrete specimens
von: Labadi, Y., et al.
Veröffentlicht: (2005)

Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
von: Dahmani, L., et al.
Veröffentlicht: (2009)

Prediction of defect types at flash-butt welding of concrete reinforcement bars
von: S. K. Fomichov, et al.
Veröffentlicht: (2011)

Evaluating Mechanical Properties of Macro-Synthetic Fiber-Reinforced Concrete with Various Types and Contents
von: Daneshfar, M., et al.
Veröffentlicht: (2017)

Effect of Length of External Bar at Soffit on the Performance of Retrofitted RC Beams – A Finite Element Study
von: Vasudevan, G., et al.
Veröffentlicht: (2017)

Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
von: Xiong, X.Y., et al.
Veröffentlicht: (2017)

Experimental Study of Concrete Subjected to Explosive Loading
von: Rekucki, R., et al.
Veröffentlicht: (2002)

Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)

Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)

Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
von: Shariati, M., et al.
Veröffentlicht: (2011)

XFEM Simulation of Pore-Induced Fracture of a Heterogeneous Concrete Beam in Three-Point Bending
von: Zhang, C.C., et al.
Veröffentlicht: (2018)

Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)

Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)

Assessment of the technical condition of the reinforcement of the reinforced concrete beam span of the bridge of the end of the XX century
von: A. R. Dziubyk, et al.
Veröffentlicht: (2021)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
von: Rafi, M.M.
Veröffentlicht: (2018)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
von: Rafi, M.M.
Veröffentlicht: (2019)

Modeling and Analysis of the Tensile and Flexural Properties of a FiberOrientated Hybrid Nanocomposite Using Taguchi Methodology
von: Rostamiyan, Y.
Veröffentlicht: (2015)

Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)

Numerical Simulation of the Thermomechanical Behavior of a Hot Stamping Die
von: Jiang, Q.Y., et al.
Veröffentlicht: (2018)

Stress Distribution Behavior in Single-Lap Adhesively Bonded Beams
von: He, X., et al.
Veröffentlicht: (2014)

Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)

In service inspections of thick walled concrete sructures
von: Pecinka, L., et al.
Veröffentlicht: (2006)

Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)

Numerical Simulation of the Inlet/Outlet Pressure Ratio Effect on the Heat Transfer Coefficient in an Air Turbine Cascade
von: He, Z., et al.
Veröffentlicht: (2019)

Elastoplastic Damage Model for Concrete under Triaxial Compression and Reversed Cyclic Loading
von: Zhang, J., et al.
Veröffentlicht: (2018)

Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
von: Dahmani, L.
Veröffentlicht: (2011)

Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)

Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)

Influence of modification on the characteristics of reinforcing steels intended for reinforced concrete structures
von: S. O. Polishko
Veröffentlicht: (2023)