Generation and Validation of Crack Growth Resistance Curve from DCB Specimens: An Experimental Study
This article examines fracture toughness and
 interlaminar failure load of double cantilever
 beam (DCB) specimens made of glass/epoxy of
 three different lay-ups. The present model requires
 the applied load–displacement history
 and crack extension to genera...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2013 |
| Main Authors: | Alfred Franklin, V., Christopher, T. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2013
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/112675 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Generation and Validation of Crack Growth Resistance Curve from DCB Specimens: An Experimental Study / Franklin V. Alfred, T. Christopher // Проблемы прочности. — 2013. — № 6. — С. 56-68. — Бібліогр.: 25 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Interlaminar Fracture Toughness Estimation of Aerospace Composites by Weighted Residual Approach
by: Alfred Franklin, V., et al.
Published: (2015)
by: Alfred Franklin, V., et al.
Published: (2015)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
by: Jameel, Azher, et al.
Published: (2016)
by: Jameel, Azher, et al.
Published: (2016)
Untitled
by: Alfred Franklin, et al.
Published: (2013)
by: Alfred Franklin, et al.
Published: (2013)
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
by: Haeri, H.
Published: (2015)
by: Haeri, H.
Published: (2015)
On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
by: Haeri, H., et al.
Published: (2014)
by: Haeri, H., et al.
Published: (2014)
Numerical simulation of stress-strain state near crack tip in a compact tensile specimen
by: Kotlyarenko, A.A., et al.
Published: (2009)
by: Kotlyarenko, A.A., et al.
Published: (2009)
Micromechanical Coupled Study of Crack Growth Initiation Criterion in Pressure Vessel Steel
by: Rakin, M., et al.
Published: (2004)
by: Rakin, M., et al.
Published: (2004)
Theoretical-experimental model for predicting crack growth rate in structural alloys under combined action of fatigue and creep
by: Pokrovskii, V.V., et al.
Published: (2009)
by: Pokrovskii, V.V., et al.
Published: (2009)
Cyclic cracking resistance of brittle materials in compressive loading
by: Lanin, A.G.
Published: (2009)
by: Lanin, A.G.
Published: (2009)
Numerical simulation of brittle damage in concrete specimens
by: Labadi, Y., et al.
Published: (2005)
by: Labadi, Y., et al.
Published: (2005)
Analysis of Fatigue and Crack Growth in Carbon-Fiber Epoxy Matrix Composite Laminates
by: Putic, S., et al.
Published: (2003)
by: Putic, S., et al.
Published: (2003)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
by: Yang, B., et al.
Published: (2015)
by: Yang, B., et al.
Published: (2015)
Vacuum Crack Growth Behavior of Austenitic Stainless Steel under Fatigue Loading
by: Takeda, T., et al.
Published: (2011)
by: Takeda, T., et al.
Published: (2011)
Fracture Toughness and Crack Resistance of Steam Pipeline Steel in Initial and Used States
by: Zrilic, M., et al.
Published: (2004)
by: Zrilic, M., et al.
Published: (2004)
Long-Term Aging Effect on the Crack Growth in the of Main Circulating Pump Casing Material
by: Xue, F., et al.
Published: (2015)
by: Xue, F., et al.
Published: (2015)
Mechanical behavior and optimization of multidirectional laminate specimens under delamination by bending
by: Ahmed Benyahia, A., et al.
Published: (2006)
by: Ahmed Benyahia, A., et al.
Published: (2006)
THE EXPERIMENTAL VALIDATION OF THE GROUNDING DEVICE RESISTANCE MEASUREMENT METHOD
by: Nizhevskyi, I. V., et al.
Published: (2016)
by: Nizhevskyi, I. V., et al.
Published: (2016)
A Probabilistic Model for Describing Short Fatigue Crack Growth Behavior of LZ50 Steel
by: Yang, B., et al.
Published: (2016)
by: Yang, B., et al.
Published: (2016)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)
by: Major, S., et al.
Published: (2008)
Application of the Beremin Model for Cruciform Specimen to Determine the Fracture Probability in Case of WPS
by: Beleznai, R., et al.
Published: (2013)
by: Beleznai, R., et al.
Published: (2013)
Grain boundary influence during short fatigue crack growth using a discrete dislocation technique
by: Hansson, P., et al.
Published: (2008)
by: Hansson, P., et al.
Published: (2008)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
by: Torabi, A.R., et al.
Published: (2013)
by: Torabi, A.R., et al.
Published: (2013)
In situ scanning electron microscopy study of fatigue crack propagation
by: Jacobsson, L., et al.
Published: (2008)
by: Jacobsson, L., et al.
Published: (2008)
Experimental Study of Concrete Subjected to Explosive Loading
by: Rekucki, R., et al.
Published: (2002)
by: Rekucki, R., et al.
Published: (2002)
On Issue of Comparison of the Unified Curve and Master Curve Methods and Application for RPV Structural Integrity Assessment
by: Margolin, B.Z., et al.
Published: (2016)
by: Margolin, B.Z., et al.
Published: (2016)
A Simulation Study on the Effect of Cavity Shapes on the Penetration of Linear Shaped Charges with Curved Liners
by: Dong, S.K., et al.
Published: (2018)
by: Dong, S.K., et al.
Published: (2018)
Creep Lifetime Assessment of Pressure-Tight PE100 Pipes Based on a Slow Fatigue Crack Growth
by: Luo, W.B., et al.
Published: (2018)
by: Luo, W.B., et al.
Published: (2018)
Crack growth in FeP04 steel under cyclic tension for different notches on the basis of its microstructure
by: Rozumek, D.
Published: (2008)
by: Rozumek, D.
Published: (2008)
An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
by: Zhao, Z., et al.
Published: (2016)
by: Zhao, Z., et al.
Published: (2016)
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
by: Razavi, S.M.J., et al.
Published: (2017)
by: Razavi, S.M.J., et al.
Published: (2017)
Effect of the Loading Rate on the Brittle Fracture of Terfenol-D Specimens in Magnetic Field: Strain Energy Density Approach
by: Colussi, M., et al.
Published: (2016)
by: Colussi, M., et al.
Published: (2016)
Austenite Grain Growth Behavior of 20Mn5 Steel Used for Heavy Hydro-Generator Shaft
by: Liu, M., et al.
Published: (2018)
by: Liu, M., et al.
Published: (2018)
Study on the Cracking Mechanism of YQ450NQR1 High-Strength Weathering Steel
by: Qing, J.S., et al.
Published: (2018)
by: Qing, J.S., et al.
Published: (2018)
Comparative Analysis of Crack Resistance of Fiber Metal Laminates with HS2 Glass/T700 Carbon Layers for Various Stress Ratios
by: Song, X., et al.
Published: (2016)
by: Song, X., et al.
Published: (2016)
Experimental Study on the Coaxing Effect of Multi-Level Stresses with Different Sequences
by: Zhao, L.H., et al.
Published: (2017)
by: Zhao, L.H., et al.
Published: (2017)
Determination of Mechanical Properties of Aged NPP Components Using Instrumented Hardness Testing and Other Miniature Specimen Testing Techniques
by: Lenkey, G.B., et al.
Published: (2013)
by: Lenkey, G.B., et al.
Published: (2013)
Numerical Analysis of Crack Propagation Path Using an Advanced Element Cracking Method
by: Zhong, Z.P., et al.
Published: (2014)
by: Zhong, Z.P., et al.
Published: (2014)
Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
by: Rafi, M.M.
Published: (2018)
by: Rafi, M.M.
Published: (2018)
Analysis and Experimental Study of Vibration System Characteristics of Ultrasonic Compound Electrical Machining
by: Deng, Z.Q., et al.
Published: (2017)
by: Deng, Z.Q., et al.
Published: (2017)
Numerical Simulation and Experimental Study on the Interface Bonding of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2018)
by: Jin, H.R., et al.
Published: (2018)
Similar Items
-
Interlaminar Fracture Toughness Estimation of Aerospace Composites by Weighted Residual Approach
by: Alfred Franklin, V., et al.
Published: (2015) -
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
by: Jameel, Azher, et al.
Published: (2016) -
Untitled
by: Alfred Franklin, et al.
Published: (2013) -
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
by: Haeri, H.
Published: (2015) -
On the Strength and Crack Propagation Process of the Pre-Cracked Rock-Like Specimens under Uniaxial Compression
by: Haeri, H., et al.
Published: (2014)