Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
The effect of the substrate temperature and CH₄
 concentrations on the fracture behavior of thin
 polycrystalline diamond films was systematically
 investigated by X-ray diffraction and scanning
 electron microscopy. The results show that the
 fracture behavio...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2014 |
| Hauptverfasser: | Li, D.S., Zuo, D.W., Qin, Q.H. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/112698 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films / D.S. Li, D.W. Zuo, Q.H. Qin // Проблемы прочности. — 2014. — № 2. — С. 22-28. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
von: D. S. Li, et al.
Veröffentlicht: (2014)
von: D. S. Li, et al.
Veröffentlicht: (2014)
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
von: Wang, H.F., et al.
Veröffentlicht: (2017)
von: Wang, H.F., et al.
Veröffentlicht: (2017)
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
von: Pan, Z.Y., et al.
Veröffentlicht: (2018)
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008)
von: Musalek, R., et al.
Veröffentlicht: (2008)
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)
von: Konecna, R., et al.
Veröffentlicht: (2008)
Microstructural and fracture analysis of aged cast duplex steel
von: Dyja, D., et al.
Veröffentlicht: (2008)
von: Dyja, D., et al.
Veröffentlicht: (2008)
Cryogenic Fracture Behavior of Metastable Austenitic Stainless Steel in a High Magnetic Field
von: Shindo, Y., et al.
Veröffentlicht: (2010)
von: Shindo, Y., et al.
Veröffentlicht: (2010)
Internal structure parameters and synthesis conditions of polycrystalline diamond films
von: Samsonenko, S.N., et al.
Veröffentlicht: (2007)
von: Samsonenko, S.N., et al.
Veröffentlicht: (2007)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
von: Wang, Y.X., et al.
Veröffentlicht: (2014)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Using micro- and nanodispersive diamonds for deposition of polycrystalline diamond films in glow discharge
von: I. I. Vyrovets, et al.
Veröffentlicht: (2007)
von: I. I. Vyrovets, et al.
Veröffentlicht: (2007)
Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)
Interfacial Fracture Toughness of Multilayer Composite Structures
von: Her, S.-C., et al.
Veröffentlicht: (2015)
von: Her, S.-C., et al.
Veröffentlicht: (2015)
Fracture resistance of ceramics: edge fracture method
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
von: Gogotsi, G.A., et al.
Veröffentlicht: (2005)
A Ductile Tear Fracture Analysis of Lap Welded Joints
von: Imad, A., et al.
Veröffentlicht: (2004)
von: Imad, A., et al.
Veröffentlicht: (2004)
Fracture Analysis of a Three-Dimensional Functionally Graded Multilayered
von: Rizov, V.I.
Veröffentlicht: (2018)
von: Rizov, V.I.
Veröffentlicht: (2018)
Analysis of fracture mechanisms and surface quality in drilling of composite materials
von: Sedlacek, J., et al.
Veröffentlicht: (2008)
von: Sedlacek, J., et al.
Veröffentlicht: (2008)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Compression Behavior of Biodegradable Thermoplastic Plasticizer-Containing Composites
von: Guo, A.F., et al.
Veröffentlicht: (2019)
von: Guo, A.F., et al.
Veröffentlicht: (2019)
Surface Strengthening Behavior of Magnesium Alloy with Laser Thermal Loading under Rapid Cooling
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
von: Ge, Y.Q., et al.
Veröffentlicht: (2018)
Effect of Aging Treatment on Surface Roughness, Mechanical Properties, and Fracture Behavior of 6xxx and 7xxx Aluminum Alloys
von: Sevim, I., et al.
Veröffentlicht: (2014)
von: Sevim, I., et al.
Veröffentlicht: (2014)
Experimental Study and Finite Element Analysis of Critical Stresses of Reinforced Thermoplastic Pipes under Various Loads
von: Li, G.H., et al.
Veröffentlicht: (2016)
von: Li, G.H., et al.
Veröffentlicht: (2016)
Quantitative fractographic analysis of impact fracture surfaces of steel R73
von: Mrazkova, L., et al.
Veröffentlicht: (2008)
von: Mrazkova, L., et al.
Veröffentlicht: (2008)
Annealing Effect on the Microstructure and Mechanical Properties of a Thin Titanium Nitride Film
von: Her, S.C., et al.
Veröffentlicht: (2014)
von: Her, S.C., et al.
Veröffentlicht: (2014)
Review of new formats for fracture mechanics parameters
von: Landes, J.D., et al.
Veröffentlicht: (2006)
von: Landes, J.D., et al.
Veröffentlicht: (2006)
Analysis of Warm Prestressing Effect on Fracture Toughness of Reactor Pressure Vessel Steels
von: Beleznai, R., et al.
Veröffentlicht: (2010)
von: Beleznai, R., et al.
Veröffentlicht: (2010)
Tensile Fracture Analysis of Key-Hole Notches by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2016)
von: Torabi, A.R., et al.
Veröffentlicht: (2016)
Compression Deformation Behavior and Processing Map of Pure Copper
von: Huang, S.H., et al.
Veröffentlicht: (2016)
von: Huang, S.H., et al.
Veröffentlicht: (2016)
Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)
von: Zhang, K., et al.
Veröffentlicht: (2018)
Fracture Criterion for the Tensile Test of 7075 Aluminum Alloy
von: Chen, D.C., et al.
Veröffentlicht: (2015)
von: Chen, D.C., et al.
Veröffentlicht: (2015)
Fracture Characteristics of B1500HS Steel Hot Blank Parts
von: Hou, H.L., et al.
Veröffentlicht: (2018)
von: Hou, H.L., et al.
Veröffentlicht: (2018)
Analysis of thin isotropic rectangular and circular plates with multiquadrics
von: Ferreira, A.J.M., et al.
Veröffentlicht: (2005)
von: Ferreira, A.J.M., et al.
Veröffentlicht: (2005)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Thermal stability of ultrahard polycrystalline diamond composite materials
von: D. Meng, et al.
Veröffentlicht: (2015)
von: D. Meng, et al.
Veröffentlicht: (2015)
Thermal stability of ultrahard polycrystalline diamond composite materials
von: Meng, D., et al.
Veröffentlicht: (2015)
von: Meng, D., et al.
Veröffentlicht: (2015)
Experimental and Numerical Analysis of Springback Behavior of Aluminum Alloys
von: Slota, J., et al.
Veröffentlicht: (2017)
von: Slota, J., et al.
Veröffentlicht: (2017)
Fracture toughness of multilayer pipes
von: Nezbedova, E., et al.
Veröffentlicht: (2008)
von: Nezbedova, E., et al.
Veröffentlicht: (2008)
Two-parametrical fracture criterion
von: Ziliukas, A.
Veröffentlicht: (2006)
von: Ziliukas, A.
Veröffentlicht: (2006)
Behavior of Self-Compacting Concrete-Filled Steel Tube Columns with Inclined Stiffener Ribs under Axial Compression
von: Liang, W., et al.
Veröffentlicht: (2017)
von: Liang, W., et al.
Veröffentlicht: (2017)
Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)
Ähnliche Einträge
-
Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
von: D. S. Li, et al.
Veröffentlicht: (2014) -
Application of Stir Tool Force Measuring Dynamometer for Friction Stir Welding of Aluminum Alloys
von: Wang, H.F., et al.
Veröffentlicht: (2017) -
Stacking Sequence Effect on the Fracture Behavior of Narrow L-Shaped Cross-Ply Laminates: Experimental Study
von: Pan, Z.Y., et al.
Veröffentlicht: (2018) -
Mechanical properties and fracture behavior of high-strength steels
von: Musalek, R., et al.
Veröffentlicht: (2008) -
Influence of nitriding on the fatigue behavior and fracture micromechanisms of nodular cast Iron
von: Konecna, R., et al.
Veröffentlicht: (2008)