Study on Fatigue Life of Plow Bit under Different Planning Parameters
In order to study the fatigue life of plow bit under
 different planning parameters, the process of
 plow bit cutting coal seam is simulated based on
 a solid model. The variation of the stress in the
 joint between the blade and carbide head is obtained
 by s...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2014 |
| Hauptverfasser: | Zhang, Q., Xu, M.J., Hu, N. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/112709 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Study on Fatigue Life of Plow Bit under Different Planning Parameters / Q. Zhang, M.J. Xu, N. Hu // Проблемы прочности. — 2014. — № 2. — С. 132-140. — Бібліогр.: 11 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Q. Zhang, et al.
Veröffentlicht: (2014)
von: Q. Zhang, et al.
Veröffentlicht: (2014)
Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018)
von: Zhang, Q., et al.
Veröffentlicht: (2018)
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
von: Liu, Y.Q., et al.
Veröffentlicht: (2016)
Mathematical model of the disk plow
von: V. V. Marenichenko, et al.
Veröffentlicht: (2015)
von: V. V. Marenichenko, et al.
Veröffentlicht: (2015)
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)
von: Zedira, H., et al.
Veröffentlicht: (2004)
Improved Method of Fatigue Life Assessment for TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Evaluation of the limit state and cyclic life of structural materials under thermal fatigue
von: Gopkalo, A.P.
Veröffentlicht: (2009)
von: Gopkalo, A.P.
Veröffentlicht: (2009)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
von: Karolczuk, A., et al.
Veröffentlicht: (2008)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
von: Yang, B., et al.
Veröffentlicht: (2015)
von: Yang, B., et al.
Veröffentlicht: (2015)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Isothermal Fatigue and Creep-Fatigue Interaction Behavior of Nickel-Base Directionally Solidified Superalloy
von: Haq, A.U., et al.
Veröffentlicht: (2018)
von: Haq, A.U., et al.
Veröffentlicht: (2018)
Effect of Cyclic Stresses below the Endurance Limit on the Fatigue Life of 40Cr Steel
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
von: Zhao, L.H., et al.
Veröffentlicht: (2018)
Fatigue life of welded joints according to energy criteria in the critical plane
von: Lagoda, T.
Veröffentlicht: (2006)
von: Lagoda, T.
Veröffentlicht: (2006)
A Method of Virtual Design of the Fatigue Life of a Dynamic Structure
von: Zhao, W., et al.
Veröffentlicht: (2015)
von: Zhao, W., et al.
Veröffentlicht: (2015)
About regularities of technological parameters influence on accident–free mining of flat coal seams by plow systems
von: Demydov, M.S., et al.
Veröffentlicht: (2014)
von: Demydov, M.S., et al.
Veröffentlicht: (2014)
Fatigue of NPP Components and Piping under Service Conditions
von: Filatov, V.M.
Veröffentlicht: (2004)
von: Filatov, V.M.
Veröffentlicht: (2004)
Fatigue lifetime of ADI from ultimate tensile strength to permanent fatigue limit
von: Zapletal, J., et al.
Veröffentlicht: (2008)
von: Zapletal, J., et al.
Veröffentlicht: (2008)
On local fatigue life and fatigue strength
von: V. L. Busov, et al.
Veröffentlicht: (2010)
von: V. L. Busov, et al.
Veröffentlicht: (2010)
An Improved Projection Method for Determination of Fatigue Parameters of Metal Structures Based on Spherical Direction Cosine Group Construction
von: Yang, B., et al.
Veröffentlicht: (2016)
von: Yang, B., et al.
Veröffentlicht: (2016)
Planning Step-Stress Life Tests for the Generalized Rayleigh Distribution under Progressive Type-II Censoring with Binomial Removals
von: Ismail, Ali A.
Veröffentlicht: (2017)
von: Ismail, Ali A.
Veröffentlicht: (2017)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Modeling of Damage Interaction in Fatigue Relaxation for Long-Term Life Prediction. Case of Alloy 800 Grade 2 Study at 550°C
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
von: Gharad, A. El, et al.
Veröffentlicht: (2002)
Assessment method of parameters and characteristics of bit errors
von: V. M. Kichak, et al.
Veröffentlicht: (2017)
von: V. M. Kichak, et al.
Veröffentlicht: (2017)
Boikos' traditional plow (an attempt of cross-cultural analysis)
von: I. Boiko
Veröffentlicht: (2016)
von: I. Boiko
Veröffentlicht: (2016)
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Accelerated Life Test and FEM Simulation-Based Fatigue Analysis of an Aluminum Alloy Push Rod
von: Xua, L., et al.
Veröffentlicht: (2019)
von: Xua, L., et al.
Veröffentlicht: (2019)
In situ scanning electron microscopy study of fatigue crack propagation
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
von: Jacobsson, L., et al.
Veröffentlicht: (2008)
Structural Strength and Service Life of the Extrusion Forming Die for Agricultural Engine Piston Heads
von: Yang, L.Q., et al.
Veröffentlicht: (2018)
von: Yang, L.Q., et al.
Veröffentlicht: (2018)
Optimum Failure-Censored Step-Stress Life Test Plans for the Lomax Distribution
von: Ismail, Ali A.
Veröffentlicht: (2016)
von: Ismail, Ali A.
Veröffentlicht: (2016)
Dynamic Properties of Purkinje Cells Having Different Electrophysiological Parameters: A Model Study
von: Zhang, X., et al.
Veröffentlicht: (2015)
von: Zhang, X., et al.
Veröffentlicht: (2015)
Dynamic Properties of Purkinje Cells Having Different Electrophysiological Parameters: A Model Study
von: X. Zhang, et al.
Veröffentlicht: (2015)
von: X. Zhang, et al.
Veröffentlicht: (2015)
Research of technological parameters of blasthole drilling with cutter drilling bits which have pins of different regidity
von: V. G. Synkov, et al.
Veröffentlicht: (2016)
von: V. G. Synkov, et al.
Veröffentlicht: (2016)
Influence of Temperature on Fatigue Crack Propagation in TiAl Alloys
von: Feng, R.C., et al.
Veröffentlicht: (2014)
von: Feng, R.C., et al.
Veröffentlicht: (2014)
Optimal Design of Failure-Censored Constant-Stress Life Test Plans for the Inverse Weibull Distribution
von: Ismaila, Ali A., et al.
Veröffentlicht: (2019)
von: Ismaila, Ali A., et al.
Veröffentlicht: (2019)
Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)
von: Zhang, L., et al.
Veröffentlicht: (2015)
Study on Thermal Stress of Honeycomb Ceramic Regenerators with Different Parameters
von: Y. X. Wang, et al.
Veröffentlicht: (2014)
von: Y. X. Wang, et al.
Veröffentlicht: (2014)
Chinese scientific drilling №1 well diamonds coring bit technology
von: Zhang Xiaoxi, et al.
Veröffentlicht: (2010)
von: Zhang Xiaoxi, et al.
Veröffentlicht: (2010)
Fatigue Fracture Analysis of Composite Plates with an Elliptical Hole
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
von: Kielbasa, B., et al.
Veröffentlicht: (2017)
Size effect in contact fatigue
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
von: Sosnovskii, L.A., et al.
Veröffentlicht: (2009)
Ähnliche Einträge
-
Study on Fatigue Life of Plow Bit under Different Planning Parameters
von: Q. Zhang, et al.
Veröffentlicht: (2014) -
Study on High-Strength Ring Chain Dynamic Characteristics under Different Launch Parameters
von: Zhang, Q., et al.
Veröffentlicht: (2018) -
Thermal Fatigue Life Prediction of Ventilation Air Methane Oxidation Bed
von: Liu, Y.Q., et al.
Veröffentlicht: (2016) -
Mathematical model of the disk plow
von: V. V. Marenichenko, et al.
Veröffentlicht: (2015) -
Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)