Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
Glass fiber reinforced polymer (GFRP) due to
 its corrosion resistance is gaining popularity in
 the civil engineering community, as an alternative
 material to steel reinforcement. GFRP reinforced
 bar (rebar) has a high tensile strength
 with moderate elasti...
Gespeichert in:
| Veröffentlicht in: | Проблемы прочности |
|---|---|
| Datum: | 2014 |
| Hauptverfasser: | Lee, J.Y., Kim, K.H., Kim, S.W., Chang, M. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/112713 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load / J.Y. Lee, K.H. Kim, S.W. Kim, M. Chang // Проблемы прочности. — 2014. — № 2. — С. 98-105. — Бібліогр.: 16 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
von: J. Y. Lee, et al.
Veröffentlicht: (2014)
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
von: Lee, J.-Y., et al.
Veröffentlicht: (2015)
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)
von: Kim, J.W.
Veröffentlicht: (2016)
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015)
von: Ji, S.J., et al.
Veröffentlicht: (2015)
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)
Methods of strength and life time evaluation of fiber reinforced concretes (A review)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
von: Ye. Andreikiv, et al.
Veröffentlicht: (2018)
Improvement of Strength and Radiation Protection Properties of Biodegradable Jute Fiber Reinforced Material
von: Verma, S., et al.
Veröffentlicht: (2017)
von: Verma, S., et al.
Veröffentlicht: (2017)
Experimental Analysis of the Influence of Structural Parameters on the Behavior of Glass-Fiber Reinforced Polypropylene Composites
von: Bounouas, L., et al.
Veröffentlicht: (2001)
von: Bounouas, L., et al.
Veröffentlicht: (2001)
The influence of mechanical and corrosion defects on strength of thermally hardened reinforcement bars of 35HS steel
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
von: Ya. Blikharskyi, et al.
Veröffentlicht: (2018)
Strength of Reactive Powder Concrete Beam-Column Joints Reinforced with High-Strength (HRB600) Bars under Seismic Loading
von: Wang, D.H., et al.
Veröffentlicht: (2017)
von: Wang, D.H., et al.
Veröffentlicht: (2017)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: A. Buyukkaragoz, et al.
Veröffentlicht: (2013)
von: A. Buyukkaragoz, et al.
Veröffentlicht: (2013)
A Numerical Study of the Flexural Behavior of Concrete Beams Reinforced with AFRP Bars
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)
von: Buyukkaragoz, A., et al.
Veröffentlicht: (2013)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
von: Huang, T., et al.
Veröffentlicht: (2016)
von: Huang, T., et al.
Veröffentlicht: (2016)
Complex estimation of material degradation at the cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
Complex estimation of material degradation at the cyclic loading
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2017)
Complex estimation of material degradation at the cyclic loading
von: K. V. Vakulenko, et al.
Veröffentlicht: (2017)
von: K. V. Vakulenko, et al.
Veröffentlicht: (2017)
Research of structure and properties polytetrafluoroethylene reinforced fiber arselon
von: A. I. Burja, et al.
Veröffentlicht: (2017)
von: A. I. Burja, et al.
Veröffentlicht: (2017)
Nano-sized phase inclusions in As₂S₃ glass, films and fibers based on this glass
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
von: Mateleshko, N., et al.
Veröffentlicht: (2004)
Study of Mechanical Degradation of 9Cr-1Mo-V-Nb Steel under Creep-Fatigue Interaction Conditions
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Creep-Fatigue Behavior Evaluation by Reversible Permeability of CrMo Ferritic Steel for Ultra-Supercritical Steem Power Plants
von: Kim, C.S.
Veröffentlicht: (2016)
von: Kim, C.S.
Veröffentlicht: (2016)
The technological decision of manufacturing of a forming tool on ceramic reinforced bars
von: O. I. Voronova
Veröffentlicht: (2018)
von: O. I. Voronova
Veröffentlicht: (2018)
Prediction of defect types at flash-butt welding of concrete reinforcement bars
von: S. K. Fomichov, et al.
Veröffentlicht: (2011)
von: S. K. Fomichov, et al.
Veröffentlicht: (2011)
"Reverse Gradualism", Investment Collapse and Monetary Degradation in Russia in the 1990s
von: Rozmainsky, I.V.
Veröffentlicht: (2014)
von: Rozmainsky, I.V.
Veröffentlicht: (2014)
Static and fatigue strength of basalt reinforcement
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
von: M. M. Hvozdiuk, et al.
Veröffentlicht: (2013)
Modern trends in the production of corrosion-resistant and fire-resistant prestressing reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2021)
Cyclic strength of damaged tee joint
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
von: P. S. Jukhimets, et al.
Veröffentlicht: (2015)
Identification of fracture mechanisms of cement mortar reinforced with basalt and polypropylene fibers
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
von: V. R. Skalskyi, et al.
Veröffentlicht: (2020)
Assessment of strength and deformation of heat-strengthened reinforcement
von: Ya. Z. Blikharskyi, et al.
Veröffentlicht: (2020)
von: Ya. Z. Blikharskyi, et al.
Veröffentlicht: (2020)
Modern trends in the production of corrosion-resistant and fire-resistant stress-free reinforcing bars
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
von: V. H. Razdobrieiev, et al.
Veröffentlicht: (2020)
The Structural Strength of Glass: Hidden Damage
von: Veera, F.A., et al.
Veröffentlicht: (2011)
von: Veera, F.A., et al.
Veröffentlicht: (2011)
Technological strength and analysis of causes of weldability degradation and cracking
von: V. V. Derlomenko, et al.
Veröffentlicht: (2010)
von: V. V. Derlomenko, et al.
Veröffentlicht: (2010)
Cetyltrimethylammonium chloride influence on silica optical fiber strength
von: El Abdi, R., et al.
Veröffentlicht: (2013)
von: El Abdi, R., et al.
Veröffentlicht: (2013)
Reinforcement of epoxy polymers with hydride-silylated fumed silica
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
von: P. O. Kuzema, et al.
Veröffentlicht: (2020)
Investigation of thermal stability organic plastics based of polysulfonamide reinforced by fiber Kevlar
von: A. I. Burja, et al.
Veröffentlicht: (2015)
von: A. I. Burja, et al.
Veröffentlicht: (2015)
CT study of products from non-metallic composites reinforced by carbon fibers
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
von: Levenets, V.V., et al.
Veröffentlicht: (2022)
Research and development of structures of single-row rope-profile guides for movement of vehicles in bar reinforcement
von: A. O. Rubel, et al.
Veröffentlicht: (2022)
von: A. O. Rubel, et al.
Veröffentlicht: (2022)
Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: J. M. Kim, et al.
Veröffentlicht: (2014)
von: J. M. Kim, et al.
Veröffentlicht: (2014)
Microstructure and Mechanical Properties of TiC Nanoparticle-Reinforced Iron-Matrix Composites
von: Kim, J.M., et al.
Veröffentlicht: (2014)
von: Kim, J.M., et al.
Veröffentlicht: (2014)
Variation of Mechanical Characteristics and Microstructural Evolution in AISI 316 Austenitic Stainless Steel Subjected to Long-Term Thermal Aging at Elevated Temperature
von: Kim, C.S.
Veröffentlicht: (2017)
von: Kim, C.S.
Veröffentlicht: (2017)
Influence of interface yield strength on the SIF for a crack in a fiber and energy absorbed at fiber fracture
von: A. V. Borovik
Veröffentlicht: (2014)
von: A. V. Borovik
Veröffentlicht: (2014)
Ähnliche Einträge
-
Strength Degradation of Glass Fiber Reinforced Polymer Bars Subjected to Reversed Cyclic Load
von: J. Y. Lee, et al.
Veröffentlicht: (2014) -
Bond Strength Deterioration of Reinforced and Prestressed Concrete Members at Reversed Cyclic Loads
von: Lee, J.-Y., et al.
Veröffentlicht: (2015) -
Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016) -
Mechanical Properties and Machinability of Glass Fiber-Reinforced Polyetheretherketone
von: Ji, S.J., et al.
Veröffentlicht: (2015) -
Prediction of fiber-reinforced concrete strength under compression
von: V. P. Sylovaniuk, et al.
Veröffentlicht: (2016)