Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
Евростандарт EN 1993-1-1 описывает общий метод определения предельной нагрузки для стальных стержней при продольном изгибе с кручением. В методе учитываются кривые, описывающие потерю устойчивости при продольном изгибе. Предельная нагрузка при продольном изгибе с кручением может быть рассчитана ме...
Saved in:
| Published in: | Проблемы прочности |
|---|---|
| Date: | 2014 |
| Main Authors: | Dahmani, L., Boudjcmia, A. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут проблем міцності ім. Г.С. Писаренко НАН України
2014
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/112727 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading / L. Dahmani, A. Boudjcmia // Проблемы прочности. — 2014. — № 3. — С. 164-168. — Бібліогр.: 8 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
by: L. Dahmani, et al.
Published: (2014)
by: L. Dahmani, et al.
Published: (2014)
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
by: Dahmani, L., et al.
Published: (2015)
by: Dahmani, L., et al.
Published: (2015)
Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
by: Liu, M.S., et al.
Published: (2017)
by: Liu, M.S., et al.
Published: (2017)
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
by: Shariati, M., et al.
Published: (2011)
by: Shariati, M., et al.
Published: (2011)
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
by: Czechowski, L., et al.
Published: (2013)
by: Czechowski, L., et al.
Published: (2013)
Thermomechanical Response of LNG Concrete Tank to Cryogenic Temperatures
by: Dahmani, L.
Published: (2011)
by: Dahmani, L.
Published: (2011)
Buckling Analysis of Steel Semi-Spherical Shells with Square Cutout under Axial Compression
by: Torabi, H., et al.
Published: (2014)
by: Torabi, H., et al.
Published: (2014)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
by: Major, S., et al.
Published: (2008)
by: Major, S., et al.
Published: (2008)
Deformation and fracture of high-temperature steels at different temperatures and loading rates
by: Kondryakov, E.A., et al.
Published: (2009)
by: Kondryakov, E.A., et al.
Published: (2009)
Area and point approaches in fatigue life evaluation under combined bending and torsion loading
by: Karolczuk, A., et al.
Published: (2008)
by: Karolczuk, A., et al.
Published: (2008)
Crack Identification in Reinforced Concrete Beams Using ANSYS Software
by: Dahmani, L., et al.
Published: (2010)
by: Dahmani, L., et al.
Published: (2010)
Modeling and influence of shear retention parameter on the response of reinforced concrete structural elements
by: Dahmani, L., et al.
Published: (2009)
by: Dahmani, L., et al.
Published: (2009)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2019)
by: Hu, X.L., et al.
Published: (2019)
Response of an Indented Square Tube under Impact Loading
by: Tan, Z.H., et al.
Published: (2015)
by: Tan, Z.H., et al.
Published: (2015)
Dynamic Response of Pavement Plates to the Positive and Negative Phases of the Friedlander Load
by: Alisjahbana, S.W., et al.
Published: (2018)
by: Alisjahbana, S.W., et al.
Published: (2018)
An Algorithm for Estimating Minimum Strength of Thin-Walled Structures to Resist Elastic Buckling under Pressure
by: Ishinabe, M., et al.
Published: (2012)
by: Ishinabe, M., et al.
Published: (2012)
Numerical Simulation of Flexible Riser under Torsion
by: Liu, M.S., et al.
Published: (2017)
by: Liu, M.S., et al.
Published: (2017)
Bending Performance of Steel/CFRP Plate-Reinforced Core Timber Beams
by: Xiong, X.Y., et al.
Published: (2017)
by: Xiong, X.Y., et al.
Published: (2017)
Fracture of Polymethylmethacrylate under Pulse Loading Conditions
by: Atroshenko, S.A., et al.
Published: (2002)
by: Atroshenko, S.A., et al.
Published: (2002)
FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
by: Kaščák, L., et al.
Published: (2016)
by: Kaščák, L., et al.
Published: (2016)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
by: Bomas, H., et al.
Published: (2008)
by: Bomas, H., et al.
Published: (2008)
Radiation-Induced Embrittlement of WWER-440 Reactor Pressure Vessel Steel under Loading
by: Grinik, E.U., et al.
Published: (2003)
by: Grinik, E.U., et al.
Published: (2003)
Analysis of Gas Nitriding Characteristics under Different Cold Hardening and Nitriding Pressure Conditions for Low-Carbon Low-Alloy Steel
by: Zhou, Z A., et al.
Published: (2018)
by: Zhou, Z A., et al.
Published: (2018)
Investigation of Fracture of Spheroplastics under Static and Dynamic Loading Conditions
by: Atroshenko, S.A., et al.
Published: (2002)
by: Atroshenko, S.A., et al.
Published: (2002)
Experimental and Numerical Analysis of Normal and Lateral High-Velocity Impacts on Carbon Fiber-Reinforced Polymer Laminates
by: Huang, T., et al.
Published: (2016)
by: Huang, T., et al.
Published: (2016)
Electron Backscatter Diffraction Analysis of the Microstructure Fineness in Pure Copper under Torsional Deformation
by: Wang, C.P., et al.
Published: (2018)
by: Wang, C.P., et al.
Published: (2018)
Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
by: Yang, B., et al.
Published: (2018)
by: Yang, B., et al.
Published: (2018)
Prediction of residual pipeline resource taking into account the operation loading conditions
by: Banahevych, Yu.V., et al.
Published: (2009)
by: Banahevych, Yu.V., et al.
Published: (2009)
Short Fatigue Crack Growth at Different Maintenance Times for LZ50 Steel
by: Yang, B., et al.
Published: (2015)
by: Yang, B., et al.
Published: (2015)
Strength Improvement of Ferritic/Martensitic T91 Steel by Cross Wedge Rolling at Different Austenitizing Temperatures
by: He, T., et al.
Published: (2017)
by: He, T., et al.
Published: (2017)
Brittle Failure of Graphite Weakened by V-Notches: A Review of Some Recent Results under Different Loading Modes
by: Berto, F., et al.
Published: (2015)
by: Berto, F., et al.
Published: (2015)
Simulating the Crack Propagation Mechanism of Pre-Cracked Concrete Specimens under Shear Loading Conditions
by: Haeri, H.
Published: (2015)
by: Haeri, H.
Published: (2015)
Comparison of the Effect of Different Heat Treatment Processes on Microstructure and Mechanical Properties of Stainless Steel Clad Plate
by: Jin, H.R., et al.
Published: (2017)
by: Jin, H.R., et al.
Published: (2017)
Dynamic Response of Gradient Foams
by: Hu, L.L., et al.
Published: (2014)
by: Hu, L.L., et al.
Published: (2014)
Energy Absorption Optimization of Multiaction Plastic Working Element of Vehicle Systems under Emergency Impact Loading Conditions
by: Boiko, A.
Published: (2002)
by: Boiko, A.
Published: (2002)
Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
by: Adib, H., et al.
Published: (2004)
by: Adib, H., et al.
Published: (2004)
Accelerating Effects of Cyclic Creep Due to the Alternative Load Compared with Constant Load for CD 304L
by: Daei-Sorkhabi, A.H., et al.
Published: (2015)
by: Daei-Sorkhabi, A.H., et al.
Published: (2015)
Registration and assessment of load cycles in pipelines
by: Torop, O., et al.
Published: (2009)
by: Torop, O., et al.
Published: (2009)
Prediction of a High Temperature Bonding Condition at the Interface for the Hot-Rolled Stainless Steel Clad Plate on Rolling
by: Guan, B., et al.
Published: (2018)
by: Guan, B., et al.
Published: (2018)
Elastoplastic Model of Sand under Complex Loading
by: Wan, Z., et al.
Published: (2018)
by: Wan, Z., et al.
Published: (2018)
Similar Items
-
Lateral Torsional Buckling Response of Steel Beam with Different Boundary Conditions and Loading
by: L. Dahmani, et al.
Published: (2014) -
Lateral Torsional Buckling of an Eccentrically Loaded Channel Section Beam
by: Dahmani, L., et al.
Published: (2015) -
Effect of Impact Load on Dynamic Buckling of Steel Lattice Arch
by: Liu, M.S., et al.
Published: (2017) -
Experimental and Numerical Studies on Buckling and Post-Buckling Behavior of Cylindrical Panels Subjected to Compressive Axial Load
by: Shariati, M., et al.
Published: (2011) -
Static and Dynamic Buckling of Rectangular Functionally Graded Plates Subjected to Thermal Loading
by: Czechowski, L., et al.
Published: (2013)