A subharmonic mixer for the 220–325 GHz frequency range
We have made a subharmonic mixer (SHM) for the 220–325 GHz frequency
 range with conversion losses lower than 30 dB at the intermediate frequency 3 GHz. The
 subharmonic mixer design was based on a GaAs mixer Schottky barrier diode with beam leads on a quartz 25-μm thick microwave...
Gespeichert in:
| Veröffentlicht in: | Semiconductor Physics Quantum Electronics & Optoelectronics |
|---|---|
| Datum: | 2013 |
| ISSN: | 1560-8034 |
| Hauptverfasser: | , , , , , |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут фізики напівпровідників імені В.Є. Лашкарьова НАН України
2013
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/117669 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | A subharmonic mixer for the 220–325 GHz frequency range / A.V. Zorenko, N.V. Kolesnik, T.V. Kritskaya, Ya.Ya. Kudryk, Yu.V. Marunenko, L.P. Ryzhanovich // Semiconductor Physics Quantum Electronics & Optoelectronics. — 2013. — Т. 16, № 1. — С. 84-85. — Бібліогр.: 3 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Zusammenfassung: | We have made a subharmonic mixer (SHM) for the 220–325 GHz frequency
range with conversion losses lower than 30 dB at the intermediate frequency 3 GHz. The
subharmonic mixer design was based on a GaAs mixer Schottky barrier diode with beam leads on a quartz 25-μm thick microwave board. The microwave board was placed in a
package with a waveguide channel of local oscillator input (cross-sectional area
1.2×2.4 mm) and waveguide channel of signal input (cross-sectional area 0.4×0.8 mm²
). The IF signal goes out through a subminiature A-connector, wave impedance of which is 50 Ohm.
|
|---|---|
| ISSN: | 1560-8034 |