Copper–Titanium Solid Solutions are a New Generation of High-Strength Age-Hardening Alloys
In this review the precipitation phenomenon and age-hardening response in Cu–Ti alloys founded on the Ukrainian and Russian authors investigations mainly was discussed. At that point, it was especially underlined that a mechanism of the early stage of the decomposition was not as spinodal one (Ameri...
Gespeichert in:
| Veröffentlicht in: | Успехи физики металлов |
|---|---|
| Datum: | 2005 |
| 1. Verfasser: | Chuistov, K.V. |
| Format: | Artikel |
| Sprache: | Russisch |
| Veröffentlicht: |
Інститут металофізики ім. Г.В. Курдюмова НАН України
2005
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/125811 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Copper–Titanium Solid Solutions are a New Generation of High-Strength Age-Hardening Alloys / K.V. Chuistov // Успехи физики металлов. — 2005. — Т. 6, № 1. — С. 55-103. — Бібліогр.: 87 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Development of new high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)
Effect of solid solution hardening on fatigue life of BT1-0 alloy titanium
von: V. S. Trush
Veröffentlicht: (2010)
von: V. S. Trush
Veröffentlicht: (2010)
The Kinetics of Nucleation During Cellular Decomposition of Solid Solutions in Copper—Titanium Alloys
von: T. S. Hatsenko
Veröffentlicht: (2014)
von: T. S. Hatsenko
Veröffentlicht: (2014)
Influence of solid-solution hardening of the surface on mechanical characteristics of the titanium alloy VT1-0
von: V. S. Trush
Veröffentlicht: (2011)
von: V. S. Trush
Veröffentlicht: (2011)
Electron beam melting of new high-strength titanium alloy T120
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)
Strain hardening of titanium alloys doped
von: A. V. Kotko
Veröffentlicht: (2013)
von: A. V. Kotko
Veröffentlicht: (2013)
Dispersion strengthening — the way to increase of the strength properties of titanium alloys of new generation (Review)
von: G. M. Grigorenko, et al.
Veröffentlicht: (2012)
von: G. M. Grigorenko, et al.
Veröffentlicht: (2012)
Developing of homogeneus complex alloyed Ni-based alloys with solid solution hardening
von: V. H. Ivanchenko, et al.
Veröffentlicht: (2014)
von: V. H. Ivanchenko, et al.
Veröffentlicht: (2014)
Electron beam welding of complexly-alloyed high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)
von: S. V. Akhonin, et al.
Veröffentlicht: (2016)
Butt resistance welding by burning-off of high-strength heat-hardenable aluminum alloys
von: K. V. Gushchin, et al.
Veröffentlicht: (2016)
von: K. V. Gushchin, et al.
Veröffentlicht: (2016)
Electron beam cold hearth remelting of high-temperature titanium alloys hardened by silicides
von: Severin, A.Yu., et al.
Veröffentlicht: (2008)
von: Severin, A.Yu., et al.
Veröffentlicht: (2008)
High-strength eutectic alloys of the ternary Al – Si – Mg system, alloyed by zinc and copper
von: N. P. Korzhova, et al.
Veröffentlicht: (2015)
von: N. P. Korzhova, et al.
Veröffentlicht: (2015)
Influence of copper additives and copper-titanium alloy for consolidation diamond powder when sintered under high pressure and high temperature
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)
von: E. M. Lutsak, et al.
Veröffentlicht: (2017)
Properties of high-strength titanium alloy T110 joints made by fusion welding
von: S. V. Akhonin, et al.
Veröffentlicht: (2014)
von: S. V. Akhonin, et al.
Veröffentlicht: (2014)
Structure and properties of new high-strength titanium alloy T120, produced by the method of EBR after deformational and heat treatment
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)
Producing of high-strength titanium alloy VT22 by method of electron beam melting
von: S. V. Akhonin, et al.
Veröffentlicht: (2018)
von: S. V. Akhonin, et al.
Veröffentlicht: (2018)
Structure and service properties of welded joints of high-strength steels, aluminum and titanium alloys
von: L. I. Markashova, et al.
Veröffentlicht: (2017)
von: L. I. Markashova, et al.
Veröffentlicht: (2017)
Structural strength of welded joints of thermo-hardened Al–Cu–Mg alloy
von: O. P. Ostash, et al.
Veröffentlicht: (2019)
von: O. P. Ostash, et al.
Veröffentlicht: (2019)
Control of the solid solution decay by heat treatments of deformed niobium-titanium alloys
von: Chirkina, L.A., et al.
Veröffentlicht: (2013)
von: Chirkina, L.A., et al.
Veröffentlicht: (2013)
Regularities of Change in Strain Hardening Exponent of Structural Titanium Alloys at Nonuniform Deformation
von: O. M. Ivasishin, et al.
Veröffentlicht: (2013)
von: O. M. Ivasishin, et al.
Veröffentlicht: (2013)
Narrow-gap welding of joints of up to 110 mm thick high-strength titanium alloys
von: S. V. Akhonin, et al.
Veröffentlicht: (2010)
von: S. V. Akhonin, et al.
Veröffentlicht: (2010)
Structure and properties of high-strength titanium alloy Ti-10-2-3 of electroslag remelting
von: I. V. Protokovilov, et al.
Veröffentlicht: (2017)
von: I. V. Protokovilov, et al.
Veröffentlicht: (2017)
The influence of titanium containing inoculates on structure of low-alloy high-strength steel weld metals
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2020)
von: H. M. Hryhorenko, et al.
Veröffentlicht: (2020)
Production of ingots from high-strength structural titanium-base alloys by electron beam melting
von: V. O. Berezos
Veröffentlicht: (2021)
von: V. O. Berezos
Veröffentlicht: (2021)
Electroslag melting and thermomechanical treatment of high-strength titanium pseudo-β-alloy TS6
von: I. V. Protokovilov, et al.
Veröffentlicht: (2016)
von: I. V. Protokovilov, et al.
Veröffentlicht: (2016)
Strength of welded joints of heat-hardenable aluminium alloys in tig and friction stir welding
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2019)
von: A. G. Pokljatskij, et al.
Veröffentlicht: (2019)
Influence of filler material on the structure and properties of welded joints of high-strength VT19 titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)
von: S. V. Akhonin, et al.
Veröffentlicht: (2022)
Microstructure and mechanical properties of parts from high-strength titanium alloys produced by waam method (Review)
von: R. V. Selin, et al.
Veröffentlicht: (2021)
von: R. V. Selin, et al.
Veröffentlicht: (2021)
Structure and properties of welded joints of high-strength two-phase titanium alloys made by EBW and TIG
von: S. V. Akhonin, et al.
Veröffentlicht: (2015)
von: S. V. Akhonin, et al.
Veröffentlicht: (2015)
Intermetallic heat-hardening of titanium alloys, produced by method of magnetically-controlled electroslag melting
von: Ja. Ju. Kompan, et al.
Veröffentlicht: (2009)
von: Ja. Ju. Kompan, et al.
Veröffentlicht: (2009)
Features of fracture of high-strength VT22 titanium bolts
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
von: O. M. Ivasyshyn, et al.
Veröffentlicht: (2015)
Brazing of titanium aluminide by rapidly-hardened strips
von: S. V. Maksimova, et al.
Veröffentlicht: (2010)
von: S. V. Maksimova, et al.
Veröffentlicht: (2010)
Influence of heat treatment on the structure and properties of welded joints of high-strength titanium alloys based on β-phase
von: S. V. Akhonin, et al.
Veröffentlicht: (2021)
von: S. V. Akhonin, et al.
Veröffentlicht: (2021)
Heat treatment of high-strength pseudo-β-titanium alloy produced by ebm process and of its welded joints
von: S. V. Akhonin, et al.
Veröffentlicht: (2020)
von: S. V. Akhonin, et al.
Veröffentlicht: (2020)
Alloying elements influence on aging of low-cost metastable titanium beta-alloys
von: Ye. Markovskyi, et al.
Veröffentlicht: (2013)
von: Ye. Markovskyi, et al.
Veröffentlicht: (2013)
Structure and properties of fully-penetrated metal of two-phase titanium alloy with dispersion hardening at AAW
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)
von: G. M. Grigorenko, et al.
Veröffentlicht: (2016)
Influence of electric-spark alloying by graphite on element composition of titanium and copper substrates
von: V. F. Mazanko, et al.
Veröffentlicht: (2015)
von: V. F. Mazanko, et al.
Veröffentlicht: (2015)
Optical properties and electronic structure of copper-manganese solid solutions
von: Bondar, V.M., et al.
Veröffentlicht: (2013)
von: Bondar, V.M., et al.
Veröffentlicht: (2013)
New promising titanium-based alloys
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)
von: S. V. Akhonin, et al.
Veröffentlicht: (2019)
Influence of work hardening on conductance of platinum, copper and silver nanocontacts
von: O. I. Shkljarevskij, et al.
Veröffentlicht: (2013)
von: O. I. Shkljarevskij, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Development of new high-strength titanium alloy
von: S. V. Akhonin, et al.
Veröffentlicht: (2016) -
Effect of solid solution hardening on fatigue life of BT1-0 alloy titanium
von: V. S. Trush
Veröffentlicht: (2010) -
The Kinetics of Nucleation During Cellular Decomposition of Solid Solutions in Copper—Titanium Alloys
von: T. S. Hatsenko
Veröffentlicht: (2014) -
Influence of solid-solution hardening of the surface on mechanical characteristics of the titanium alloy VT1-0
von: V. S. Trush
Veröffentlicht: (2011) -
Electron beam melting of new high-strength titanium alloy T120
von: S. V. Akhonin, et al.
Veröffentlicht: (2017)