Possibility of the application of the computational intelligence in the production of superhard materials. Report 2
A new system to control a 630-ton and a 2500-ton presses has been developed. By using this system it has been made possible to define new parameters related to pressure and temperature and the influence of certain factors on them. Furthermore, the new system has been shown to indicate that other pa...
Gespeichert in:
| Veröffentlicht in: | Сверхтвердые материалы |
|---|---|
| Datum: | 2012 |
| ISSN: | 0203-3119 |
| Hauptverfasser: | Tavares, L.O., Vianna, W.S., Bobrovnitchii, G.S., Skury, A.L.D., Rangel, J.J.A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2012
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/125986 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Possibility of the application of the computational intelligence in the production of superhard materials. Report 2 / L.O. Tavares, W.S. Vianna, G.S. Bobrovnitchii, A.L.D. Skury, J.J.A. Rangel // Сверхтвердые материалы. — 2012. — № 4. — С. 16-26. — Бібліогр.: 3 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Possibility of the application of the computational intelligence in the production of superhard materials. Report 1
von: Tavares, L.O., et al.
Veröffentlicht: (2012)
von: Tavares, L.O., et al.
Veröffentlicht: (2012)
Possibility of the application of the computational intelligence in the production of superhard materials. Report 1
von: L. O. Tavares, et al.
Veröffentlicht: (2012)
von: L. O. Tavares, et al.
Veröffentlicht: (2012)
Possibility of the application of the computational intelligence in the production of superhard materials. Report 2
von: L. O. Tavares, et al.
Veröffentlicht: (2012)
von: L. O. Tavares, et al.
Veröffentlicht: (2012)
Prediction of superhard carbon allotropes from the segment combination method
von: He, Ch., et al.
Veröffentlicht: (2012)
von: He, Ch., et al.
Veröffentlicht: (2012)
A potential superhard material m-BCN
von: Rui, S., et al.
Veröffentlicht: (2018)
von: Rui, S., et al.
Veröffentlicht: (2018)
Elastic and thermodynamic properties of potentially superhard carbon boride materials
von: Letsoalo, T.E., et al.
Veröffentlicht: (2012)
von: Letsoalo, T.E., et al.
Veröffentlicht: (2012)
Boron: a hunt for superhard polymorphs
von: Oganov, A.R., et al.
Veröffentlicht: (2009)
von: Oganov, A.R., et al.
Veröffentlicht: (2009)
Predicting new superhard phases
von: Li, Q., et al.
Veröffentlicht: (2010)
von: Li, Q., et al.
Veröffentlicht: (2010)
Mechanical properties of superhard boron subnitride B₁₃N₂
von: Solozhenko, V.L., et al.
Veröffentlicht: (2017)
von: Solozhenko, V.L., et al.
Veröffentlicht: (2017)
Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
von: Kolabylina, T., et al.
Veröffentlicht: (2017)
von: Kolabylina, T., et al.
Veröffentlicht: (2017)
Hard and superhard carbon phases synthesised from fullerites under pressure
von: Brazhkin, V.V., et al.
Veröffentlicht: (2012)
von: Brazhkin, V.V., et al.
Veröffentlicht: (2012)
From soft to superhard: fifty years of experiments on cold-compressed graphite
von: Wang, Y., et al.
Veröffentlicht: (2012)
von: Wang, Y., et al.
Veröffentlicht: (2012)
From superhard to hard: a review of transition metal dioxides TiO₂, ZrO₂, and HfO₂ hardness
von: Al-Khatatbeh, Y., et al.
Veröffentlicht: (2014)
von: Al-Khatatbeh, Y., et al.
Veröffentlicht: (2014)
Influence of micron WC addition on the microstructure and mechanical properties of ultrafine WC–Co cemented carbides at the elevated temperature
von: Liu, C., et al.
Veröffentlicht: (2018)
von: Liu, C., et al.
Veröffentlicht: (2018)
Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: Han, P., et al.
Veröffentlicht: (2018)
von: Han, P., et al.
Veröffentlicht: (2018)
Intrinsic hardness of crystalline solids
von: Tse, J.S.
Veröffentlicht: (2010)
von: Tse, J.S.
Veröffentlicht: (2010)
Preferential etching by flowing oxygen on the (100) surfaces of HPHT single-crystal diamond
von: Yang, L.M., et al.
Veröffentlicht: (2017)
von: Yang, L.M., et al.
Veröffentlicht: (2017)
A novel layer-structured PtN₂: first-principles calculations
von: Fan, C.Z., et al.
Veröffentlicht: (2013)
von: Fan, C.Z., et al.
Veröffentlicht: (2013)
Developments in synthesis, characterization, and application of large, high-quality CVD single crystal diamond
von: Liang, Q., et al.
Veröffentlicht: (2013)
von: Liang, Q., et al.
Veröffentlicht: (2013)
High-pressure behaviors of carbon nanotubes
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
Crystal structures, elastic properties, and hardness of high-pressure synthesized CrB₂ and CrB₄
von: Wang, S., et al.
Veröffentlicht: (2014)
von: Wang, S., et al.
Veröffentlicht: (2014)
Facile and scalable synthesis of Ti₅Si₃ nanoparticles via solid-state route in an autoclave
von: Mao, W., et al.
Veröffentlicht: (2017)
von: Mao, W., et al.
Veröffentlicht: (2017)
MAX-phase coatings produced by thermal spraying
von: Markocsan, N., et al.
Veröffentlicht: (2017)
von: Markocsan, N., et al.
Veröffentlicht: (2017)
Preparation and characterization of diamond–silicon carbide–silicon composites by gaseous silicon vacuum infiltration process
von: Liu, R.J., et al.
Veröffentlicht: (2014)
von: Liu, R.J., et al.
Veröffentlicht: (2014)
Comparative investigation of NbN and Nb–Si–N films: experiment and theory
von: Ivashchenko, V.I., et al.
Veröffentlicht: (2014)
von: Ivashchenko, V.I., et al.
Veröffentlicht: (2014)
Design of hard surfaces with metal (Hf/V) nitride multinanolayers
von: Escobar, C., et al.
Veröffentlicht: (2014)
von: Escobar, C., et al.
Veröffentlicht: (2014)
Synthesis of orthorhombic chromium boride by solid state reaction
von: Mao, W., et al.
Veröffentlicht: (2016)
von: Mao, W., et al.
Veröffentlicht: (2016)
Mechanical and tribological properties of V–C–N coatings as a function of applied bias voltage
von: Caicedo, J.C., et al.
Veröffentlicht: (2016)
von: Caicedo, J.C., et al.
Veröffentlicht: (2016)
High dosage thermoluminescence diamond dosimeters
von: Hernández-Ortiz, M., et al.
Veröffentlicht: (2012)
von: Hernández-Ortiz, M., et al.
Veröffentlicht: (2012)
Influence of N₂ partial pressure on the microstructure, hardness, and thermal stability of CrZrSiN nanocomposite coatings
von: Kim, K.S., et al.
Veröffentlicht: (2016)
von: Kim, K.S., et al.
Veröffentlicht: (2016)
Covalent-bonded graphyne polymers with high hardness
von: Hu, M., et al.
Veröffentlicht: (2014)
von: Hu, M., et al.
Veröffentlicht: (2014)
Thermal stability of ultrahard polycrystalline diamond composite materials
von: Meng, D., et al.
Veröffentlicht: (2015)
von: Meng, D., et al.
Veröffentlicht: (2015)
HP-HT-спекание, микроструктура и свойства B₆O-, TiC-содержащих композитов на основе сBN
von: Туркевич, Д.В., et al.
Veröffentlicht: (2015)
von: Туркевич, Д.В., et al.
Veröffentlicht: (2015)
Вплив розміру включень SiC у структурі AlN–SiC на електрофізичні властивості композиту
von: Сербенюк, Т.Б., et al.
Veröffentlicht: (2016)
von: Сербенюк, Т.Б., et al.
Veröffentlicht: (2016)
Microscopic models of hardness
von: Gao, F.M., et al.
Veröffentlicht: (2010)
von: Gao, F.M., et al.
Veröffentlicht: (2010)
Thermoelastic equation of state of boron suboxide B₆O up to 6 GPa and 2700 K: simplified anderson-grüneisen model and thermodynamic consistency
von: Kurakevych, O.O., et al.
Veröffentlicht: (2014)
von: Kurakevych, O.O., et al.
Veröffentlicht: (2014)
Fabrication and wear performance of (Cu–Sn) solution/TiCx bonded diamond composites
von: Baoyan, L., et al.
Veröffentlicht: (2018)
von: Baoyan, L., et al.
Veröffentlicht: (2018)
Ideal stoichiometric technetium nitrides under pressure: a first-principles study
von: Zhao, Z.L., et al.
Veröffentlicht: (2014)
von: Zhao, Z.L., et al.
Veröffentlicht: (2014)
Thermodynamic model of hardness: Particular case of boron-rich solids
von: Mukhanov, V.A., et al.
Veröffentlicht: (2010)
von: Mukhanov, V.A., et al.
Veröffentlicht: (2010)
Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)
von: Osipov, A.S., et al.
Veröffentlicht: (2016)
Ähnliche Einträge
-
Possibility of the application of the computational intelligence in the production of superhard materials. Report 1
von: Tavares, L.O., et al.
Veröffentlicht: (2012) -
Possibility of the application of the computational intelligence in the production of superhard materials. Report 1
von: L. O. Tavares, et al.
Veröffentlicht: (2012) -
Possibility of the application of the computational intelligence in the production of superhard materials. Report 2
von: L. O. Tavares, et al.
Veröffentlicht: (2012) -
Prediction of superhard carbon allotropes from the segment combination method
von: He, Ch., et al.
Veröffentlicht: (2012) -
A potential superhard material m-BCN
von: Rui, S., et al.
Veröffentlicht: (2018)