Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
Wear resistance of nano-polycrystalline diamond (NPD) rods containing various amounts of hexagonal diamond has been tested with a new method for practical evaluation of the wear–resistance rate of superhard ceramics, in addition to the measurements of their Knoop hardness. The wear resistance of NPD...
Saved in:
| Published in: | Сверхтвердые материалы |
|---|---|
| Date: | 2012 |
| Main Authors: | Kurio, A., Tanaka, Y., Sumiya, H., Irifune, T., Shinmei, T., Ohfuji, H., Kagi, H. |
| Format: | Article |
| Language: | English |
| Published: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2012
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/126006 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents / A. Kurio, Y. Tanaka, H. Sumiya, T. Irifune, T. Shinmei, H. Ohfuji, H. Kagi // Сверхтвердые материалы. — 2012. — № 6. — С. 3-11. — Бібліогр.: 17 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012)
by: A. Kurio, et al.
Published: (2012)
Novel wear-resistant superhard diamond composite polycrystalline material
by: A. A. Shulzhenko, et al.
Published: (2018)
by: A. A. Shulzhenko, et al.
Published: (2018)
Thermal stability of ultrahard polycrystalline diamond composite materials
by: Meng, D., et al.
Published: (2015)
by: Meng, D., et al.
Published: (2015)
Fabrication and wear performance of (Cu–Sn) solution/TiCx bonded diamond composites
by: Baoyan, L., et al.
Published: (2018)
by: Baoyan, L., et al.
Published: (2018)
Application of diamond composite thermo-resistant material of increased wear-resistance for diamond smoothening of steel 40X
by: S. V. Sokhan, et al.
Published: (2018)
by: S. V. Sokhan, et al.
Published: (2018)
Wear resistance of diamond-dolomite and diamond-strontium carbonate composites produced under HPHT-conditions
by: N. A. Bondarenko, et al.
Published: (2018)
by: N. A. Bondarenko, et al.
Published: (2018)
High dosage thermoluminescence diamond dosimeters
by: Hernández-Ortiz, M., et al.
Published: (2012)
by: Hernández-Ortiz, M., et al.
Published: (2012)
Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
by: D. S. Li, et al.
Published: (2014)
by: D. S. Li, et al.
Published: (2014)
Analysis of Fracture Behavior of Thin Polycrystalline Diamond Films
by: Li, D.S., et al.
Published: (2014)
by: Li, D.S., et al.
Published: (2014)
Effect of the diamond-metal binder interface on the thermal expansion coefficient and wear resistance of electrosinted diamond composites
by: A. S. Bieliaiev, et al.
Published: (2018)
by: A. S. Bieliaiev, et al.
Published: (2018)
Unusual nano-microcrystals of natural diamond
by: V. M. Kvasnytsia
Published: (2018)
by: V. M. Kvasnytsia
Published: (2018)
Using micro- and nanodispersive diamonds for deposition of polycrystalline diamond films in glow discharge
by: I. I. Vyrovets, et al.
Published: (2007)
by: I. I. Vyrovets, et al.
Published: (2007)
Properties of diamond polycrystalline composite material obtained in the diamond-graphene-silicon system
by: A. A. Shulzhenko, et al.
Published: (2017)
by: A. A. Shulzhenko, et al.
Published: (2017)
Improving the physical and mechanical properties of synthetic diamond powders synthesized using ferroalloys to increase the wear resistance of the diamond ruling tool
by: T. O. Prikhna, et al.
Published: (2022)
by: T. O. Prikhna, et al.
Published: (2022)
Analysis of direct transformation from graphite to diamond crystal
by: Tian, B., et al.
Published: (2016)
by: Tian, B., et al.
Published: (2016)
Developments in synthesis, characterization, and application of large, high-quality CVD single crystal diamond
by: Liang, Q., et al.
Published: (2013)
by: Liang, Q., et al.
Published: (2013)
Surface morphology and structural types of natural impact apographitic diamonds
by: Kvasnytsya, V., et al.
Published: (2016)
by: Kvasnytsya, V., et al.
Published: (2016)
Influence of productivity diamond abrasive treatment on the surface morphology wear diamond crystals
by: A. M. Kuzej, et al.
Published: (2016)
by: A. M. Kuzej, et al.
Published: (2016)
The analysis of products of wear of diamond - containing composite material
by: O. P. Vynohradova, et al.
Published: (2019)
by: O. P. Vynohradova, et al.
Published: (2019)
Thermal stability of ultrahard polycrystalline diamond composite materials
by: D. Meng, et al.
Published: (2015)
by: D. Meng, et al.
Published: (2015)
Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
by: Din, S.H., et al.
Published: (2018)
by: Din, S.H., et al.
Published: (2018)
Fabrication and properties of conducting diamond nano-crystalline coatings
by: S. F. Dudnik, et al.
Published: (2014)
by: S. F. Dudnik, et al.
Published: (2014)
The impact of frictional interaction when cutting became the diamond wheel on wear of polycrystals of diamond
by: A. M. Kuzej, et al.
Published: (2019)
by: A. M. Kuzej, et al.
Published: (2019)
Features of formation of nanodisperse granular structure during RT-sintering of hexagonal diamond (lonsdaleite) powder
by: H. S. Olieinyk, et al.
Published: (2020)
by: H. S. Olieinyk, et al.
Published: (2020)
Internal structure parameters and synthesis conditions of polycrystalline diamond films
by: Samsonenko, S.N., et al.
Published: (2007)
by: Samsonenko, S.N., et al.
Published: (2007)
Thermal conductivity and electrical resistance of diamond polycrystals and diamond-copper, diamond-copper-titan composites
by: O. I. Cherniienko, et al.
Published: (2018)
by: O. I. Cherniienko, et al.
Published: (2018)
Promising method for determining the concentration of nano-sized diamond powders in water suspensions
by: Dorozinska, H.V., et al.
Published: (2018)
by: Dorozinska, H.V., et al.
Published: (2018)
Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
by: B. C. Liu, et al.
Published: (2017)
by: B. C. Liu, et al.
Published: (2017)
Improving heat resistance of polycrystalline diamond compact cutters with co–si–b binder for rock drilling
by: Liu, B.C., et al.
Published: (2017)
by: Liu, B.C., et al.
Published: (2017)
Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
by: Delong Xie, et al.
Published: (2018)
by: Delong Xie, et al.
Published: (2018)
The influence of physical_mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools
by: V. I. Lavrinenko, et al.
Published: (2013)
by: V. I. Lavrinenko, et al.
Published: (2013)
Diamond polycrystalline composite material with dispersion-hardened nickel_based additive
by: E. E. Ashkinazi, et al.
Published: (2013)
by: E. E. Ashkinazi, et al.
Published: (2013)
The effect of titanium and tungsten coating the surface of diamond monocrystals on the wear resistance of rock-cutting elements made from them
by: O. O. Bochechka, et al.
Published: (2019)
by: O. O. Bochechka, et al.
Published: (2019)
The intensity of wearing of rock-breaking elements from diamond-containing materials in dependens of chemical composition and a method of diamond coating
by: A. L. Maistrenko, et al.
Published: (2017)
by: A. L. Maistrenko, et al.
Published: (2017)
Effect of physical and mechanical properties of diamond synthesized in the presence of ferroalloys, to wear resistance rock cutting tool
by: N. V. Novikov, et al.
Published: (2016)
by: N. V. Novikov, et al.
Published: (2016)
Fabrication and wear performance of (Cu–Sn) solution/TiCx bonded diamond composites
by: L. Baoyan, et al.
Published: (2018)
by: L. Baoyan, et al.
Published: (2018)
Character of wear of synthetic diamonds differentstrength in impregnated drill bits
by: A. M. Isonkin, et al.
Published: (2018)
by: A. M. Isonkin, et al.
Published: (2018)
Effect of metal impurities on the oxidation of various carbon forms in products of detonation diamond synthesis
by: A. M. Panova, et al.
Published: (2016)
by: A. M. Panova, et al.
Published: (2016)
Production of polycrystalline materials by sintering of nanodispersed diamond nanopowders at high pressure. Review
by: O. O. Bochechka
Published: (2018)
by: O. O. Bochechka
Published: (2018)
Effect of low temperature treatments for strength index polycrystalline synthetic diamond carbonado
by: B. K. Khajdarov
Published: (2016)
by: B. K. Khajdarov
Published: (2016)
Similar Items
-
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
by: A. Kurio, et al.
Published: (2012) -
Novel wear-resistant superhard diamond composite polycrystalline material
by: A. A. Shulzhenko, et al.
Published: (2018) -
Thermal stability of ultrahard polycrystalline diamond composite materials
by: Meng, D., et al.
Published: (2015) -
Fabrication and wear performance of (Cu–Sn) solution/TiCx bonded diamond composites
by: Baoyan, L., et al.
Published: (2018) -
Application of diamond composite thermo-resistant material of increased wear-resistance for diamond smoothening of steel 40X
by: S. V. Sokhan, et al.
Published: (2018)