Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading

The paper presents the results of fatigue tests of sintered porous 316L austenitic stainless steel with different porosity. An analysis was conducted into the parameters obtained from the hysteresis loop in the load cycle (changes in the value of Young’s modulus, maximum a...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Фізико-хімічна механіка матеріалів
Datum:	2015
Hauptverfasser:	Falkowska, A., Seweryn, A.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Фізико-механічний інститут ім. Г.В. Карпенка НАН України 2015
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/134744
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading / A. Falkowska, A. Seweryn // Фізико-хімічна механіка матеріалів. — 2015. — Т. 51, № 2. — С. 53-58. — Бібліогр.: 14 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Fatigue of sintered porous materials based on 316L stainless steel under uniaxial loading
von: A. Falkowska, et al.
Veröffentlicht: (2015)

Heat treatment technology for stainless steel 316(L)
von: F. Bahfie, et al.
Veröffentlicht: (2022)

Specific corrosion behaviour of 316L stainless steel in mineral water
von: J. Capelle, et al.
Veröffentlicht: (2018)

Vacuum Crack Growth Behavior of Austenitic Stainless Steel under Fatigue Loading
von: Takeda, T., et al.
Veröffentlicht: (2011)

Fatigue life of S355JR steel under uniaxial constant amplitude and random loading conditions
von: A. Nieslony, et al.
Veröffentlicht: (2019)

Application of nanoindentation for investigation of radiation damage in SS316 stainless steel
von: Tolmachova, G.N., et al.
Veröffentlicht: (2015)

Dynamic and Postdeformation Recrystallization of Nuclear-Grade 316LN Stainless Steel
von: Zhang, R.H., et al.
Veröffentlicht: (2015)

Radiation-induced hardening of Ar+-ion irradiated SS316 stainless steel
von: S. A. Karpov, et al.
Veröffentlicht: (2016)

Hydrogen-Induced Effects in Annealed and Prestrained 316L-Type Stainless Steel Studied by Mechanical Spectroscopy
von: V. M. Shyvaniuk
Veröffentlicht: (2014)

Hydrogen-Induced Effects in Annealed and Prestrained 316L-Type Stainless Steel Studied by Mechanical Spectroscopy
von: Shyvaniuk, V.M.
Veröffentlicht: (2014)

Behavior of non-metallic inclusions in structure of cast electroslag stainless steel of AISI of 316 type
von: A. A. Polishko, et al.
Veröffentlicht: (2014)

Microstructure evolution and deuterium trapping in low-energy cascades after irradiation of SS316 stainless steel
von: Karpov, S.A., et al.
Veröffentlicht: (2017)

Characterization of dislocation type defects formed at low-energy deuterium irradiation of SS316 stainless steel
von: Sungurov, B.S., et al.
Veröffentlicht: (2018)

Investigations of the causes for damage in a plate heat exchanger from stainless steel AISI 316L in a food industry enterprise
von: L. I. Nyrkova, et al.
Veröffentlicht: (2024)

Vacuum diffusion welding of stainless steel through porous nickel interlayers
von: A. I. Ustinov, et al.
Veröffentlicht: (2015)

To Choice of Model of Limiting State of Heat-Resistant Materials under Uniaxial Asymmetric Loading
von: A. D. Pogrebnjak, et al.
Veröffentlicht: (2018)

Assessment of the Low-Cycle Strain-Induced Martensite Transformation in AISI 316 Stainless Steel by Magnetic and Acoustic Nondestructive Methods
von: Kim, C.S.
Veröffentlicht: (2018)

Signs of corrosion-fatigue service damages of stainless steel of heat exchanger plates
von: O. I. Zvirko, et al.
Veröffentlicht: (2021)

High-temperature creep of hard-alloy samples that are sintering under the conditions of uniaxial compression
von: V. P. Bondarenko, et al.
Veröffentlicht: (2017)

Тhe dose dependence of inert gases irradiation hardening of 316 austenitic stainless steel after low temperature irradiation
von: Karpov, S.A., et al.
Veröffentlicht: (2018)

Corrosion-fatigue endurance of steel 35 in tap water under additional cavitation loading
von: O. T. Tsyrulnyk, et al.
Veröffentlicht: (2021)

The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO₂ Laser Beam Welding
von: Caligulu, U., et al.
Veröffentlicht: (2015)

Effect of external electromagnetic field on corrosion fatigue of duplex stainless steel 2205 welded joints
von: O. L. Bilyy, et al.
Veröffentlicht: (2020)

Quantitative model for the prediction of the corrosion rate of cold-rolled 316L steel
von: A. Dittes, et al.
Veröffentlicht: (2023)

Variation of Mechanical Characteristics and Microstructural Evolution in AISI 316 Austenitic Stainless Steel Subjected to Long-Term Thermal Aging at Elevated Temperature
von: Kim, C.S.
Veröffentlicht: (2017)

Estimation of fatigue life of alloy steel 35NCD16 under random loading
von: M. Kurek, et al.
Veröffentlicht: (2016)

The Fatigue Strength of AISI 430—304 Stainless Steels Welded by CO2 Laser Beam Welding
von: U. Caligulu, et al.
Veröffentlicht: (2015)

Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)

Martensitic Transformations in Stainless Steels
von: I. E. Volokitina, et al.
Veröffentlicht: (2022)

Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)

Tribocorrosion of stainless steels (Review)
von: V. I. Pokhmurskyi, et al.
Veröffentlicht: (2010)

Short Fatigue Crack Behavior of LZ50 Axle Steel under Rotating-Bending Cyclic Loading
von: Yang, B., et al.
Veröffentlicht: (2018)

The role of interstitial (crowdion) mass-transfer for crack high-temperature healing under uniaxial loading
von: Volosyuk, M.A., et al.
Veröffentlicht: (2015)

Comprehensive comparative evaluation of quality criteria of superthin-wall welded pipes from TR316L steels made under different conditions
von: T. N. Burjak, et al.
Veröffentlicht: (2015)

Influence of substrate temperature on formation of porous structure of stainless steel in case of its joint deposition with NaCl and KCl vapors
von: Ustinov, A.I., et al.
Veröffentlicht: (2008)

The Influence of Hydrogen Addition to Argon as a Shielding Gas on the Fatigue Performance of TIG Welded AISI 304 Stainless Steel
von: E. Gцzьtok, et al.
Veröffentlicht: (2013)

The Influence of Hydrogen Addition to Argon as a Shielding Gas on the Fatigue Performance of TIG Welded AISI 304 Stainless Steel
von: Gözütok, E., et al.
Veröffentlicht: (2013)

An equivalent uniaxial fatigue stress model for analyzing landing gear fuse pins
von: Narayan, K., et al.
Veröffentlicht: (2006)

100 years anniversary stainless steel
von: O. L. Heller
Veröffentlicht: (2013)

Thermomechanical treatment of stainless steel piston rings
von: A. V. Volokitin, et al.
Veröffentlicht: (2022)