Mossbauer analysis of the structure Fe-Ni-C alloys after heat and ultrasonic treatments
Mossbauer spectroscopy has been used for atomic scale investigation of austenitic Fe-Ni-C alloys after ultrasonic and low-frequency impact surface treatments. The phase composition and hyperfine structure of the Fe-30.5 % Ni—1.5 %C and Fe-25.3 %Ni-0.78 %C alloys with the f.c.c. lattice after anneali...
Збережено в:
| Дата: | 2004 |
|---|---|
| Автори: | , , , |
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
НТК «Інститут монокристалів» НАН України
2004
|
| Назва видання: | Functional Materials |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/135245 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Mossbauer analysis of the structure Fe-Ni-C alloys after heat and ultrasonic treatments / V.M. Nadutov, D.V. Semenov, Ye.O. Svystunov, G.I. Kuzmich // Functional Materials. — 2004. — Т. 11, № 1. — С. 101-107. — Бібліогр.: 15 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| Резюме: | Mossbauer spectroscopy has been used for atomic scale investigation of austenitic Fe-Ni-C alloys after ultrasonic and low-frequency impact surface treatments. The phase composition and hyperfine structure of the Fe-30.5 % Ni—1.5 %C and Fe-25.3 %Ni-0.78 %C alloys with the f.c.c. lattice after annealing at 1373 K and 773 K in vacuum and following ultrasonic surface treatment (UST, f = 1—3 kHz, the amplitude 20 pm, t = 8— 24 s) have been studied. The results were analyzed in comparison with the low-frequency impact surface treatment (1ST) of the alloys. The microhardness of the alloys after UST has been analyzed. |
|---|