Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment
This paper describes the method of raising contact fatigue strength, designated for application
 in the manufacture of gears. Investigations were carried out on 41CrAlMo7 grade
 steel (closest equivalent: Nitralloy 135M) following quenching and tempering, nitriding
 and doubl...
Збережено в:
| Опубліковано в: : | Фізико-хімічна механіка матеріалів |
|---|---|
| Дата: | 2012 |
| Автори: | , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2012
|
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/135817 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment / A. Nakonieczny, G. Monka // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 6. — С. 24-29. — Бібліогр.: 5 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862653892496457728 |
|---|---|
| author | Nakonieczny, A. Monka, G. |
| author_facet | Nakonieczny, A. Monka, G. |
| citation_txt | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment / A. Nakonieczny, G. Monka // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 6. — С. 24-29. — Бібліогр.: 5 назв. — англ. |
| collection | DSpace DC |
| container_title | Фізико-хімічна механіка матеріалів |
| description | This paper describes the method of raising contact fatigue strength, designated for application
in the manufacture of gears. Investigations were carried out on 41CrAlMo7 grade
steel (closest equivalent: Nitralloy 135M) following quenching and tempering, nitriding
and double shot-peening. Special emphasis should be placed on the combination of the
nitriding and shot-peening technologies. Both nitriding and shot-peening have been significantly
modified and differ from the classical processes. Nitriding was carried out in such
a way as to prevent the formation on the surface of a compound layer, composed of nitrides
ε and γ. Shot-peening was carried out as a double stage operation, employing a change
of parameters. As the result of combining the modernized processes, a new technology
was developed, allowing the attaining of a contact fatigue limit that is comparable to that
obtained by carburizing or induction hardening. The paper describes the methodology and
the experimental work, as well as the achieved values of contact fatigue strength. Other
surface parameters are also given, such as roughness, hardness, state and distribution of
residual stresses.
Описано метод підвищення контактної втомної міцності сталі для виробництва механічних приводів. Досліджено сталь 41CrAlMo7 (еквівалент: Nitralloy 135M)
після гартування та відпуску, азотування та подвійної дробиноструминної обробки. Особливу увагу приділено поєднанню азотування та дробиноструминної обробки. Азотували
так, щоб попередити утворення на поверхні складного шару з нітридів ε та γ. Дробино-струминну обробку виконували у два етапи, змінюючи параметри. В результаті створено
нову технологію, що дає можливість досягати межі контактної втоми, яку можна порівняти з отриманою за навуглецювання чи індукційного зміцнення.
Описан метод повышения контактной усталостной прочности стали для
производства механических приводов. Исследована сталь 41CrAlMo7 (эквивалент: Nitralloy
135M) после закалки и отпуска, азотирования и двойной дробеструйной обработки.
Особенное внимание обращено на сочетание азотирования и дробеструйной обработки.
Азотировали так, чтобы предупредить образование на поверхности сложного слоя из
нитридов ε и γ. Дробеструйную обработку выполняли в два этапа, изменяя параметры. В
результате создана новая технология, которая дает возможность достигать предела контактной усталости, которую можно сравнить с полученной при науглероживании или индукционном упрочнении.
|
| first_indexed | 2025-12-01T23:47:19Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-135817 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 0430-6252 |
| language | English |
| last_indexed | 2025-12-01T23:47:19Z |
| publishDate | 2012 |
| publisher | Фізико-механічний інститут ім. Г.В. Карпенка НАН України |
| record_format | dspace |
| spelling | Nakonieczny, A. Monka, G. 2018-06-15T15:25:25Z 2018-06-15T15:25:25Z 2012 Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment / A. Nakonieczny, G. Monka // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 6. — С. 24-29. — Бібліогр.: 5 назв. — англ. 0430-6252 https://nasplib.isofts.kiev.ua/handle/123456789/135817 This paper describes the method of raising contact fatigue strength, designated for application
 in the manufacture of gears. Investigations were carried out on 41CrAlMo7 grade
 steel (closest equivalent: Nitralloy 135M) following quenching and tempering, nitriding
 and double shot-peening. Special emphasis should be placed on the combination of the
 nitriding and shot-peening technologies. Both nitriding and shot-peening have been significantly
 modified and differ from the classical processes. Nitriding was carried out in such
 a way as to prevent the formation on the surface of a compound layer, composed of nitrides
 ε and γ. Shot-peening was carried out as a double stage operation, employing a change
 of parameters. As the result of combining the modernized processes, a new technology
 was developed, allowing the attaining of a contact fatigue limit that is comparable to that
 obtained by carburizing or induction hardening. The paper describes the methodology and
 the experimental work, as well as the achieved values of contact fatigue strength. Other
 surface parameters are also given, such as roughness, hardness, state and distribution of
 residual stresses. Описано метод підвищення контактної втомної міцності сталі для виробництва механічних приводів. Досліджено сталь 41CrAlMo7 (еквівалент: Nitralloy 135M)
 після гартування та відпуску, азотування та подвійної дробиноструминної обробки. Особливу увагу приділено поєднанню азотування та дробиноструминної обробки. Азотували
 так, щоб попередити утворення на поверхні складного шару з нітридів ε та γ. Дробино-струминну обробку виконували у два етапи, змінюючи параметри. В результаті створено
 нову технологію, що дає можливість досягати межі контактної втоми, яку можна порівняти з отриманою за навуглецювання чи індукційного зміцнення. Описан метод повышения контактной усталостной прочности стали для
 производства механических приводов. Исследована сталь 41CrAlMo7 (эквивалент: Nitralloy
 135M) после закалки и отпуска, азотирования и двойной дробеструйной обработки.
 Особенное внимание обращено на сочетание азотирования и дробеструйной обработки.
 Азотировали так, чтобы предупредить образование на поверхности сложного слоя из
 нитридов ε и γ. Дробеструйную обработку выполняли в два этапа, изменяя параметры. В
 результате создана новая технология, которая дает возможность достигать предела контактной усталости, которую можно сравнить с полученной при науглероживании или индукционном упрочнении. en Фізико-механічний інститут ім. Г.В. Карпенка НАН України Фізико-хімічна механіка матеріалів Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment Контактна втомна міцність сталі 41CrAlMo7 за азотування та дробиноструминної обробки Контактная усталостная прочность стали 41CrAlMo7 при азотировании и дробеструйной обработке Article published earlier |
| spellingShingle | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment Nakonieczny, A. Monka, G. |
| title | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment |
| title_alt | Контактна втомна міцність сталі 41CrAlMo7 за азотування та дробиноструминної обробки Контактная усталостная прочность стали 41CrAlMo7 при азотировании и дробеструйной обработке |
| title_full | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment |
| title_fullStr | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment |
| title_full_unstemmed | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment |
| title_short | Contact fatigue strength of 41CrAlMo7 grade steel by nitriding and shot-peening treatment |
| title_sort | contact fatigue strength of 41cralmo7 grade steel by nitriding and shot-peening treatment |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/135817 |
| work_keys_str_mv | AT nakoniecznya contactfatiguestrengthof41cralmo7gradesteelbynitridingandshotpeeningtreatment AT monkag contactfatiguestrengthof41cralmo7gradesteelbynitridingandshotpeeningtreatment AT nakoniecznya kontaktnavtomnamícnístʹstalí41cralmo7zaazotuvannâtadrobinostruminnoíobrobki AT monkag kontaktnavtomnamícnístʹstalí41cralmo7zaazotuvannâtadrobinostruminnoíobrobki AT nakoniecznya kontaktnaâustalostnaâpročnostʹstali41cralmo7priazotirovaniiidrobestruinoiobrabotke AT monkag kontaktnaâustalostnaâpročnostʹstali41cralmo7priazotirovaniiidrobestruinoiobrabotke |