List of papers published in “Physicochemical Mechanics of Materials” in 2015
Збережено в:
| Дата: | 2015 |
|---|---|
| Формат: | Стаття |
| Мова: | English |
| Опубліковано: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2015
|
| Назва видання: | Фізико-хімічна механіка матеріалів |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/136264 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | List of papers published in “Physicochemical Mechanics of Materials” in 2015 // Фізико-хімічна механіка матеріалів. — 2015. — Т. 51, № 6. — С. 136-140. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| id |
nasplib_isofts_kiev_ua-123456789-136264 |
|---|---|
| record_format |
dspace |
| spelling |
nasplib_isofts_kiev_ua-123456789-1362642025-02-09T18:21:16Z List of papers published in “Physicochemical Mechanics of Materials” in 2015 Перелік статей, опублікованих у журналі “ФХММ” за 2015 р. Перечень статей, опубликованных в журнале “ФХММ” за 2015 г. 2015 Article List of papers published in “Physicochemical Mechanics of Materials” in 2015 // Фізико-хімічна механіка матеріалів. — 2015. — Т. 51, № 6. — С. 136-140. — англ. 0430-6252 https://nasplib.isofts.kiev.ua/handle/123456789/136264 en Фізико-хімічна механіка матеріалів application/pdf Фізико-механічний інститут ім. Г.В. Карпенка НАН України |
| institution |
Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| collection |
DSpace DC |
| language |
English |
| format |
Article |
| title |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 |
| spellingShingle |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 Фізико-хімічна механіка матеріалів |
| title_short |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 |
| title_full |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 |
| title_fullStr |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 |
| title_full_unstemmed |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 |
| title_sort |
list of papers published in “physicochemical mechanics of materials” in 2015 |
| publisher |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України |
| publishDate |
2015 |
| url |
https://nasplib.isofts.kiev.ua/handle/123456789/136264 |
| citation_txt |
List of papers published in “Physicochemical Mechanics of Materials” in 2015 // Фізико-хімічна механіка матеріалів. — 2015. — Т. 51, № 6. — С. 136-140. — англ. |
| series |
Фізико-хімічна механіка матеріалів |
| first_indexed |
2025-11-29T13:19:02Z |
| last_indexed |
2025-11-29T13:19:02Z |
| _version_ |
1850130934883418112 |
| fulltext |
136
Ô³çèêî-õ³ì³÷íà ìåõàí³êà ìàòåð³àë³â. – 2015. – ¹ 6. – Physicochemical Mechanics of Materials
LIST OF PAPERS PUBLISHED IN “PHYSICOCHEMICAL MECHAN ICS
OF MATERIALS” IN 2015
Vasyliv B. D., Podhurska V. Ya., and Brodnikovskyi Ye. M. Optimization
of physicomechanical properties of anode material for fuel cells ...............................1 7
Kryzhanivskyi Ye. I., Hrabovskyi R. S., Fedorovych I. Ya., and Barna R. A.
Evaluation of fracture kinetics of operated gas pipeline elements ..............................1 13
Bulyk І. І., Burkhovetskyi V. V., and Borukh I. V. The effect of alloying
with zirconium on the structural-phase state of Nd2Fe14B based alloys .....................1 20
Orynyak I. V., Zarazovskii M. M., and Bogdan A. V. Method for determination
of the critical brittleness temperature with account of scattering
of the experimental impact toughness data .................................................................1 26
Bagliuk G. A., Apininska L. M., Vergeles N. M., Uskova N. O., and Bezdorozhev O. V.
Peculiarities of formation of wear-resistant titanium carbide coatings
by the method of electrophoretic deposition ...............................................................1 37
Buketov A. V. and Skirdenko V. O. Investigation of the influence of microdispersed
fillers on physicomechanical and thermal properties of epoxy composites ................1 43
Pavlenko D. V. and Ovchinnikov O. V. The influence of deformation by screw
extrusion method on the structure and properties of ВТ1-0 alloy in different states...1 50
Kushchevska N. F., Shakhnin D. B., and Malyshev V. V. Creation of ferromagnetic
nanocomposites. I. Chemical synthesis of Fe–Co–Ni metal compounds salts ............1 58
Agrawal N. K., Agarwal R., Gautam A. K., Vijay Y. K., and Swami K. C. Surface
modification of polymer nanocomposites by glow discharge plasma treatment.........1 64
Andreikiv O. Ye., Dobrovolska L. N., and Yavorska N. V. Computational model
of crack propagation in bi-metal materials under high concentrations
and temperatures of hydrogen.....................................................................................1 71
Stashchuk M. H. and Dorosh M. I. Calculation of potential energy and geometric
parameters of a dislocation crack................................................................................1 80
Mirsalimov V. M. and Mustafayev A. B. Solution of the problem on a partial contact
of the faces of a variable width slit under temperature field influence........................1 86
Ivanytskyi Ya. L., Hembara O. V., and Chepil O. Ya. Evaluation of life time
of the power equipment elements with account of the operating
environment effect ......................................................................................................1 93
Pokhmurska H. V., Klapkiv M. D., Posuvailo V. M., Student M. M., Muecklich S.,
and Ozdemir I. Electrochemical properties of the PEO-coatings
on the AZ31 Mg-alloy manufactured by different technologies .................................1 102
Skachkov V. O. and Berezhna О. R. Crack growth specific features under static
and low-cyclic loading................................................................................................1 108
Pustovoi V. M., Reshchenko I. O., and Zvirko O. I. The effect of cycling
on electrochemical behaviour of marine gantry cranes steels .....................................1 111
Khaburskyi Ya. M. Anti-corrosion properties of plant substance extracts
in hydrochloric acid solution ......................................................................................1 116
Skalskyi V. R., Pochapskyi Ye. P., Klym B. P., and Simakovych O. H. Location
of acoustic emission sources on spherical-shaped thin-walled objects .......................1 122
Ivasyshyn A. D., Ostash O. P., Prikhna T. O., Podhurska V. Ya., and Basyuk Т. V.
The influence of technological media on mechanical and physical properties
of materials for fuel cells ............................................................................................2 7
Ivasishin O. M., Markovsky P. Ye., and Gavrysh I. M. Formation of microstructure
and mechanical properties of ВТ22 titanium alloy in non-equilibrium
conditions of rapid thermal treatment .........................................................................2 15
Krechkovska H. V., Yanovskyi S. R., Student О. Z., and Nykyforchyn H. M.
Fractographic features of service degradation of welds in main oil pipelines.............2 21
137
Filonenko N. Yu., Beryoza O. Yu., and Pilyaeva S. B. Effect of prior plastic
deformation of steel 25 on its diffusion saturation with boron and carbon .................2 28
Senthilraja R. and Naveen Sait A. Optimization of friction stir welding parameters
for magnesium alloy AZ91D using Taguchi design....................................................2 36
Grygorchak I. I., Borysiuk А. K., Shvets R.Ya., Kondyr A. I., Ivashchyshyn F. O.,
Balaban O. V., and Kurepa A. S. New carbon structures with nanorange voids
geometry for highly efficient capacitance and pseudo-capacitance energy storage ....2 42
Ünlü B. S., Uzkut M., Pinar A. M., and Özdin K. Microstructure properties
of particles reinforced polytetrafluoroethylene composite bearings after wear...........2 48
Falkowska A. and Seweryn A. Fatigue of sintered porous materials based
on 316L stainless steel under uniaxial loading............................................................2 53
Stukhliak P. D., Holotenko O. S., Dobrotvor I. H., and Mytnyk M. M. Investigation
of adhesion strength and residual stresses of epoxy composites modified
with microwave electromagnetic processing ..............................................................2 59
Nahovska I. V. The influence of hydrogen and carbon on atomic ordering
and ultimate strength of H36 alloy .............................................................................2 64
Rudiak Yu. A. and Pidhurskyi M. I. Investigation of strength of multi-layer
structures of transparent dielectrics by optical methods..............................................2 68
Soshko V. A. and Siminchenko I. P. Transformation in the cutting zone
of surfactant lubricating technological media into radical-active forms .....................2 72
Polishchuk L. K., Kharchenko H. V., and Zvirko O. I. Corrosion-fatigue crack
growth resistance of clamp-forming machine boom carriage .....................................2 77
Datsyshyn O. P., Marchenko H. P., Hlazov A. Yu., and Levus A. B. The effect
of compressing residual stresses on the propagation of shear surface cracks
in railway rails ............................................................................................................2 83
Hachkevych O. R., Solodiak M. T., Terletskyi R. F., and Hachkevych М. H.
Thermo-stressed state of magnetic layer under ferromagnetic resonance...................2 91
Shtayura S. T. The influence of rigidity of stress state under biaxial loading
of tubular specimens on strength characteristics of steel 20 in hydrogen ...................2 98
Ivanytskyi Ya. L., Maksymenko O. P., Zapotochnyi R. M., and Molkov Yu. V.
Opticodigital method for determination of strain fields in local regions
of iron-concrete bridges ..............................................................................................2 104
Filshtinskii L. A., Nosov D. M., and Yeremenko G. A. Plane problem
of magnetoelasticity for piezomagnetic medium with cracks .....................................2 109
Smoliar A. M., Miroshkina I. V., and Yurchenko S. V. Stress-strain state
of the plates of zero flexure.........................................................................................2 116
Skalskyi V. R., Rudavskyy D. V., Yarema Ya. R., and Bas V. R. Estimation
of the initiation period of fatigue microcrack at the axle bearing race ........................2 121
Zeleniak V. M. Integral equations of two-dimensional problems of thermoelasticity
for a tree-layer ring area with cracks...........................................................................2 129
Andreikiv O. Ye., Kukhar V. Z., and Dolinska I. Ya. High temperature creep
crack growth in metals under neutron irradiation (Review)........................................3 7
Savruk M. P. and Chornenkyi A. B. Plane problem of the theory of elasticity
for a quasi-orthotropic body with cracks.....................................................................3 17
Shatskyi I. P. Limiting equilibrium of a plate with a partially healed crack ........................3 25
Gavrysh V. I. Nonlinear boundary value problem of heat conduction
for a layered plate with inclusion ................................................................................3 32
Sylovanyuk V. P., Yukhym R. Ya., Lisnichuk A. Ye., and Ivantyshyn N. A.
Calculation model of fibre concrete for prediction of strength under tension.............3 39
Rudavskyy D. V. Evaluation of residual life of 3-D solid with a plane fatigue crack
under cyclic loading....................................................................................................3 46
Pasternak Ya. M., Sulym H. T., and Pasternak R. M. Action of concentrated heat
sources in a pyroelectric with cracks at a constant temperature on their faces............3 55
Ivasyshyn O. M., Vasylevskyi Ye. T., Antoniuk S. L., Velychko V. V., Markovskyi P. Ye.,
and Gavrysh I. M. Features of fracture of high-strength ВТ22 titanium bolts ............3 62
Rui-Ming Su, Ying-Dong Qu, Rong-De Li, and Jun-Hua You. Influence
of RRA treatment on microstructure and stress corrosion cracking behavior
of spray formed 7075 alloy .........................................................................................3 68
138
Kulyk V. V., Andreiko I. M., and Vavrukh V. I. The influence of operation factors
on serviceability of graphitized steel...........................................................................3 76
Levytskyi V. Ye., Laruk Yu. V., Bilyi L. M., Kochubei V. V., and Humenetskyi T. V.
Peculiarities of polyvinylchloride modifying with polystyrene plastics .....................3 83
Pohrelyuk I. M., Skvortsova S. V., Fedirko V. M., Spektor V. S., Lukyanenko O. H.,
and Tkachuk O. V. Antifriction characteristics of ВТ6 titanium alloy
after thermohydrogen processing and following nitriding ..........................................3 90
Shikimaka O., Prisacaru A., and Burlacu A. Effect of prolonged holding
under contact loading on the peculiarities of phase changes in silicon .......................3 100
Pokhmurska H. V., Student M. M., Lanets O. S., and Voitovych A. A.
The influence of vibration under protective layer application
on its microstructure and impact-abrasive wear..........................................................3 107
Dobrovetska O. Ya., Kuntyi O. I., Zozula G. I., Saldan I. V., and Reshetnyak O. V.
Galvanic sedimentation of gold and palladium on magnesium
by replacement method ...............................................................................................3 112
Petryna Yu. D., Yakym I. S., Kret N. V., and Nykyforchyn Yu. M. Contact durability
of arm pins races of three-cone rock bits ....................................................................3 117
Kushmyruk A. I., Kosohin O. V., Linyucheva O. V., Reveko V. A.,
and Miroshnychenko Yu. S. Electrochemical behaviour of porous titanium
electrode in phosphoric acid .......................................................................................3 121
Chervatiuk V. A., Slobodian Z. V., Kushnir I. M., Vysotska L. M., Kupovych R. B.,
and Mahlatiuk L. A. Physicomechanical and corrosion-resistant properties
of inhibited fast-hardening bitumen-latex emulsions..................................................3 127
Verbovytskyi Yu. V. and Zavalii I. Yu. New metal hydride electrode materials based
on R1–xMgxNi3–4 alloys for chemical sources of current ..............................................4 7
Dobrovolskyi V. D., Yershova O. G., and Solonin Yu. M. Thermal stability
and kinetics of hydrogen desorption from mechanical Mg–Al–Ni–Ti alloy...............4 19
Ivasishin O. M. and Savvakin D. G. Synthesis of zirconium and titanium-base alloys
using hydrides of corresponding metals .....................................................................4 27
Skalskyi V. R., Rudavskyy D. V., Klym B. P., Pochapskyi Ye. P., Yarema R. Ya.,
and Bas V. R. Evaluation of residual life time of hydrogenated pipe
by the acoustic signal parameters ...............................................................................4 36
Bulyk І. І., Borukh I. V., and Trostianchyn A. M. The influence of milling conditions
in hydrogen on phase composition and anisotropy of SmCo4.8Zr0.2 alloy ...................4 41
Bilyi O. L. Assessing life time of a pipeline with an internal defect
during transportation of hydrogen-containing environment........................................4 46
Ivanchenko V. G., Dekhtyarenko V. A., Pryadko T. V., Savvakin D. G.,
and Yevlash I. K. The effect of heat treatment on the hydrogenation property
of vanadium doped eutectic alloy Ti0.475Zr0.3Mn0.225...................................................4 51
Andreikiv O. Ye., Dolinska I. Ya., Kukhar V. Z., and Shtoiko I. P. The influence
of hydrogen on residual life of a gas pipeline pipe under manoeuvreing
operation mode ...........................................................................................................4 59
Krechkovska H. V. Fractographic features of hydrogen transport mechanisms
in structural steels .......................................................................................................4 67
Hredil М. І., Toribio J., and Nykyforchyn H. M. Analysis of the plasticity
characteristics of progressively drawn steel wires ......................................................4 71
Stashchuk M. H. and Dorosh M. I. Evaluation of stresses caused by the concentration
of hydrogen in metals..................................................................................................4 76
Kharchenko L. Ye., Kunta O. Ye., Zvirko O. I., Savula R. S., and Duryahina Z. A.
Diagnostics of hydrogen macrodelamination in the wall of pipe elbow
of a natural gas transmission pipeline .........................................................................4 84
Balitskii O. I., Mochulskii V. M., and Ivaskevych L. M. Evaluation of hydrogen effect
on mechanical characteristics of complex-alloyed nickel alloy ..................................4 91
Boichyshyn L. M., Hertsyk O. M., Kovbuz M. O., Kotur B. Ya., and Nosenko V. K.
Electrodes based on amorphous metallic aluminium alloys
in hydrogen emission reactions...................................................................................4 100
Ushkalov L. M., Brodnikovskyi Ye. M., Lysunenko N. O., Brychevskyi M. M.,
Vasyliv B. D., and Vasylyev O. D. Diffusion processes between the barrier
139
cathode layer and electrolyte of a solid oxide fuel cell ...............................................4 107
Haivoronskyi O. A., Pozniakov V. D., Markashova L. I., Ostash O. P., Kulyk V. V.,
Aleksieyenko T. O., and Shyshkevych O. S. Structure and mechanical properties
of heat-affected zone of restored railway wheels ........................................................4 114
Sylovanyuk V. P., Yukhym R. Ya., Ivantyshyn N. A., and Lisnichuk A. Ye. Prediction
of crack growth resistance of cement stone and fibre.................................................4 120
Odintsov V. V. and Korin O. V. The influence of crystal structure on mechanical
properties of rare earth metals and zirconium dodecaborydes ....................................4 125
Mudryi S. I., Shtablavyi I. I., Kulyk Yu. O., Talako T. L., and Lietsko A. I.
The effect of nickel on the structure of Al0.878Si0.122 eutectic melt ..............................4 131
Ravichandran M., Vidhya VS., and Anandakrishanan V. Study of characteristics
of Al + 5 wt.% TiO2 + 6 wt.% Gr hybrid p/m composite powders prepared
by ball milling process ................................................................................................4 136
Bilousova N. A., Donchenko M. I., and Herasymenko Yu. S. Electrochemical
modification of the steel surface for corrosion protection in water environment.
The influence of dissolution products of electric negative metals ..............................5 7
Kurmakova I. M., Bondar O. S., and Demchenko N. R. Quantum-chemical
descriptors as a criterion of efficiency of quaternary salts with antimicrobic
properties under biocorrosion inhibition of steel ........................................................5 17
Zin I. M., Karpenko O. V., Kornii S. A., Midyana H. H., Tymus M. B., Khlopyk O. P.,
Karpenko I. V., and Lysyak V. M. The influence of rhamnolipid biocomplex
on corrosion of duraluminum under mechanical activation of its surface...................5 24
Sizaya O. I., Savchenko O. M., Kvashuk Yu. V., Shtil N. A., and Chelyabieva V. M.
New inhibitors on the basis of vegetable raw material and regularities
of their adsorption on the steel surface........................................................................5 33
Pokhmurskii V. I., Bilyi L. M., Zin Ya. I., and Voloshyn M. P. Inhibiting
of aluminum alloy corrosion with a composition of ion-exchange pigments..............5 43
Chyhyrynets O. E., Fatyeyev Yu. F., Vorobiova V. I., and Skyba М. І. Investigation
of the mechanism of the effect of izopropanol extract rapeseed oil cake
on the processes of atmospheric corrosion of copper..................................................5 48
Obraztsov V. B., Rublova Ye. D., and Baskevich O. S. The influence of scale
inhibitor on the phase composition, morphology and sedimentation properties
of the CaCO3 precipitation..........................................................................................5 56
Khoma M. S., Chuchman М. R., Antoshchak I. M., Ivashkiv V. R., Datsko B. M.,
and Lychkovskyi E. I. Corrosion and hydrogenation of 09Г2С steel
in hydrogen sulphide environments at elevated temperatures and pressures. .............5 62
Petryna D. Yu., Gogol V. M., Petryna Yu. D., Zvirko O. I., and Nykyforchyn Yu. M.
Corrosion and corrosion-mechanical fracture of crude oil tank steel..........................5 68
Kosarevych R. Ya., Rusyn B. P., and Torska R. V. Modeling of pitting corrosion
propagation using spot images....................................................................................5 75
Poklyatsky A. G., Fedorchuk V. E., and Yavorskaya M. R. The resistance to stress
corrosion cracking of the AMg5M alloy joints received by TIG
and friction stir welding ..............................................................................................5 82
Yavorskiy V. Т. and Helesh А. В. Calculation of the parameters of evaporation
of sulphuric acid solutions with low corrosion activity of phases...............................5 90
Ved M. V., Sakhnenko M. D., Karakurkchi A. V., Yermolenko I. Yu.,
and Fomina L. P. Functional properties of galvanic alloys Fe–Mo
and Fe–Mo–W ............................................................................................................5 98
Shtefan V. V., Bairachnyi B. I., Lisachuk H. V., Smirnova O. Yu., Zuyok V. A.,
Rud R. O., and Voronina O. V. Aluminum corrosion in contact with oxidized
titanium and zirconium. ..............................................................................................5 107
Hertsyk O. M., Boichyshyn L. M., Kovbuz M. O., Kulyk Yu. О., and Nosenko V. K.
Corrosion resistance of amorphous alloy Fe68,93Mn1Mo4Cr2C7P10B5Si2(Cu, W, Al)0,07
in the environments of different aggression ...............................................................5 114
Balitskii O. I., Kawiak M., and Kawiak P. Technical diagnostics of the composite
evaporator plant by production of sulfuric acid ..........................................................5 121
Kushnir S. V., Kost M. V., and Seniv O. R. The effect of the “passive” gases barbotage
on the properties of water and aqueous solutions of sodium chloride.........................5 127
140
Onyshchuk O. O. Abrasive wear-resistance of Ti–Fe–Cr alloy obtained by self-
propagating high-temperature synthesis and modified with boron and carbon...........5 133
Skalskyi V. R., Dolinska I. Ya., Rudak M. O., and Opanasovych V. K.
AE-diagnostics of fatigue fracture of aluminium Al–Zn–Mg–Cu alloys ....................5 138
Skalskyi V. R., Pochapskyi Ye. P., and Melnyk N. P. Modeling the motion of domain
walls in ferromagnetic materials (A review) ..............................................................6 7
Sulym H. T., Yasnii O. P., and Pasternak Ya. M. Modeling of multiple cracking
under thermo-mechanical fatigue effect......................................................................6 17
Savruk M. P., Kazberuk A., and Onyshko L. Yo. The influence of material
anisotropy on the stress distribution near the parabolic notch.....................................6 24
Revenko V. P. Reduction of three-dimensional theory of thick plates bending
to solving two two-dimensional problems ..................................................................6 34
Kravets V. S. Stress-strain state of a half-plane with internal near-surface cracks...............6 40
Kozachok O. P., Slobodian B. S., and Martynyak R. M. Contact of elastic solids
in the presence of gas and non-wetting liquid in periodically arranged
interfacial gaps............................................................................................................6 50
Adamowicz А. Thermal-stress state of a disk during multiple braking ................................6 58
Skvortsova S. V., Ilyin A. A., Mamonov A. M., Nochovnaya N. A., and Umarova O. Z.
Structure and properties of sheet semi-finished products made of refractory
Ti2AlNb-based intermetallide alloy ............................................................................6 64
Starostenko S. V., Voievodin V. M., Tykhonovskyi M. A., Danilenko M. I.,
Kalchenko O. S., Velykodnyi O. M., and Andriyevska N. F. The microstructure
of austenitic 18Х18Н10Т steel mechanically alloyed
with of Y2O3–ZrO2 nano-oxides..................................................................................6 70
Kyryliv V. I., Chaikovsky B. P., Maksymiv O. V., and Shalko A. V. Contact fatigue
of 20ХН3А steel with surface nanostructure ..............................................................6 75
Vakulenko I. O. The influence of cooling on strength of a railway wheel rim ...................6 80
Kakhovskyi M. Yu. The influence of water environment on weld metal gas
saturation in underwater welding of 12Х18Н10Т steel ..............................................6 83
Povstyanoy O. Yu., Rud V. D., Samchuk L. M., and Zubovetska N. T. Manufacture
of porous materials using the power-efficient technology ..........................................6 87
Yaskiv O. I., Yelisieieva O. I., Kharkhalis A. Ya., and Kukhar I. S. The influence
of pre-oxidizing on corrosion resistance of ferrite-martensitic steels
in a lead melt...............................................................................................................6 93
Khoma M. S., Chumalo H. V., Kharchenko Ye. V., Datsko B. M., and Ivashkiv V. R.
Protective properties of aluminium-based coatings in hydrogen sulfide
environments...............................................................................................................6 100
Pokhmurskii V. I., Vasyliv Ch. B., Vynar V. A., Dovhunyk V. M., Kovaltchuk I. V.,
and Khlopyk O. P. The influence of alloying components on tribocorrosive
properties of carbide-tungsten metal ceramics............................................................6 105
Sknar Yu. Ye., Amirulloeva N. V., Sknar I. V., and Danilov F. I. Electrodeposition
of Ni–ZrO2 nanocomposites from methylsulfonate electrolyte...................................6 112
Kuntyi О. I., Sus L. V., Korniy S. А., and Okhremchuk Ye. V. Electrodeposition
of gold nanoparticles in dymethylformamide solutions of H[AuCl4]..........................6 119
He B., Han P. J., Lu C. H., Bai X. H. Effect of soil particle size on the electro-
chemical corrosion behavior of pipeline steel in saline solution.................................6 124
IN SCIENTIFIC CIRCLES
Rytsar D. I. Defence of dissertations ...................................................................................1 130
Stashchuk M. H. Scientific seminar “Problems of brittle fracture mechanics” ....................1 132
Veselivska H. H. Scientific seminar “Corrosion. Corrosion protection of metals” ..............1 135
Lukyanenko O. H. Scientific seminar “Problems of materials science
and metal surface engineering”...................................................................................1 138
Gabetta G. Environmentally assisted cracking and hydrogen embrittlement .....................1 143
List of papers published in “Physicochemical Mechanics of Materials” in 2015............6 136
Authors’ index.....................................................................................................................6 141
|