Structure features and fracture mechanisms of hexagonal boron nitride based composite materials
The structure and fracture mechanisms of hexagonal boron nitride based composite materials with formation of new phases (mullite and sialon) during hot pressing has been studied. The composite microstructure was found to be textured oriented due to morphology of crystal boron nitride particles and t...
Gespeichert in:
| Veröffentlicht in: | Functional Materials |
|---|---|
| Datum: | 2007 |
| Hauptverfasser: | Vishnyakov, L.R., Mazna, A.V., Sinaisky, B.M., Vereschaka, V.M. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
НТК «Інститут монокристалів» НАН України
2007
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/136459 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Structure features and fracture mechanisms of hexagonal boron nitride based composite materials / L.R. Vishnyakov, A.V. Mazna, B.M. Sinaisky, V.M. Vereschaka // Functional Materials. — 2007. — Т. 14, № 1. — С. 99-103. — Бібліогр.: 12 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
HP-HT treatment of hexagonal boron nitride for higher photocatalytic degradation of organic pollutants
von: Cui Liang, et al.
Veröffentlicht: (2023)
von: Cui Liang, et al.
Veröffentlicht: (2023)
Study of damage accumulation mechanisms in reinforced aluminum-boron-steel composites during thermal cycling
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2004)
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2004)
On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013)
von: G. S. Olejnik
Veröffentlicht: (2013)
Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015)
Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)
Synthesis of cubic boron nitride with using of dense modifications of boron nitride polycrystalline grains
von: I. O. Borymskyi
Veröffentlicht: (2017)
von: I. O. Borymskyi
Veröffentlicht: (2017)
Positron annihilation in boron nitride
von: Amrane, N.
Veröffentlicht: (2006)
von: Amrane, N.
Veröffentlicht: (2006)
Influence of phase composition on physico-mechanical properties of composites based on silicon, boron and titanium nitrides, sintered under high pressure
von: V. S. Urbanovich, et al.
Veröffentlicht: (2017)
von: V. S. Urbanovich, et al.
Veröffentlicht: (2017)
Determination of surface grafene-boron nitride
von: V. A. Petrova, et al.
Veröffentlicht: (2015)
von: V. A. Petrova, et al.
Veröffentlicht: (2015)
Strain energy calculations of hexagonal boron nanotubes: An ab-initio approach
von: Jain, S.K., et al.
Veröffentlicht: (2013)
von: Jain, S.K., et al.
Veröffentlicht: (2013)
Features of formation micromechanical characteristics of composite pstm system "wurtzite boron nitride – diamond"
von: V. M. Volkogon, et al.
Veröffentlicht: (2016)
von: V. M. Volkogon, et al.
Veröffentlicht: (2016)
The friction coefficient of natural diamond against materials based on cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
Reinforcement of material based on the cubic boron nitride by the help of silicon carbide whiskers
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)
von: Yu. Yu. Rumiantseva, et al.
Veröffentlicht: (2018)
Preventive action of silicon nitride at HT-HP sintering of cubic boron nitride
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
von: I. A. Petrusha, et al.
Veröffentlicht: (2015)
Analysis of fracture mechanisms and surface quality in drilling of composite materials
von: Sedlacek, J., et al.
Veröffentlicht: (2008)
von: Sedlacek, J., et al.
Veröffentlicht: (2008)
On twinning in ultrahard nanocrystalline cubic boron nitride
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)
von: V. L. Solozhenko, et al.
Veröffentlicht: (2020)
Cubic boron nitride thermobaric sintering in occurrence of unstable nitrides based on chromium and iron
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)
von: I. A. Petrusha, et al.
Veröffentlicht: (2016)
Electro-Thermo-Mechanical Response of Thick-Walled Piezoelectric Cylinder Reinforced by Boron-Nitride Nanotubes
von: Ghorbanpour Arani, et al.
Veröffentlicht: (2013)
von: Ghorbanpour Arani, et al.
Veröffentlicht: (2013)
Electro-Thermo-Mechanical Response of Thick-Walled Piezoelectric Cylinder Reinforced by Boron-Nitride Nanotubes
von: Ghorbanpour Arani, A., et al.
Veröffentlicht: (2013)
von: Ghorbanpour Arani, A., et al.
Veröffentlicht: (2013)
A crude of nadhtd materials on the over-confirmed:natural diamond for materials on the basis of cubic nitride boron
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
von: A. A. Adamovskij, et al.
Veröffentlicht: (2019)
Special features of the applications of cutting tools from polycrystalline cubic boron nitride with protective coatings
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)
von: S. A. Klimenko, et al.
Veröffentlicht: (2017)
Structural transformations during the formation of superhard materials based on the initial powders of wurtzitic boron nitride
von: G. S. Olejnik
Veröffentlicht: (2012)
von: G. S. Olejnik
Veröffentlicht: (2012)
Superhard composite powders of abrasive purposes based on diamond and cubic boron nitride structured by carbon binder
von: V. G. Poltoratskij
Veröffentlicht: (2017)
von: V. G. Poltoratskij
Veröffentlicht: (2017)
Influence of the prescribed composition on hardness of a grinding wheel with a decreased concentration of cubic boron nitride
von: V. K. Starkov, et al.
Veröffentlicht: (2015)
von: V. K. Starkov, et al.
Veröffentlicht: (2015)
Composite and polycrystalline powder materials of synthetic and natural diamonds, cubic boron nitride and boron carbide. A comparative study of forms of projection and the characteristics of the cutting edges of grains powder for grinding tools
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)
von: V. G. Poltoratskij, et al.
Veröffentlicht: (2016)
Features of mechanical strength theories of composition materials
von: T. A. Palamarchuk, et al.
Veröffentlicht: (2014)
von: T. A. Palamarchuk, et al.
Veröffentlicht: (2014)
The effect of doping on the lattice parameter and properties of cubic boron nitride
von: V. A. Mukhanov, et al.
Veröffentlicht: (2020)
von: V. A. Mukhanov, et al.
Veröffentlicht: (2020)
Highly porous cubic boron nitride wheels for dry grinding
von: V. K. Starkov
Veröffentlicht: (2013)
von: V. K. Starkov
Veröffentlicht: (2013)
On the interaction of the detonation-synthesized ultradisperse diamond and turbostratic boron nitride
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)
von: G. S. Olejnik, et al.
Veröffentlicht: (2017)
Structure of gold islet films on thermobaric sintered cubic boron nitride
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)
von: I. P. Fesenko, et al.
Veröffentlicht: (2020)
Theoretical shear strength and the onset of plasticity in nanodeformation of cubic boron nitride
von: S. N. Dub, et al.
Veröffentlicht: (2017)
von: S. N. Dub, et al.
Veröffentlicht: (2017)
Structural and corrosion fracture mechanics as components of physicochemical mechanics of materials
von: Z. T. Nazarchuk, et al.
Veröffentlicht: (2018)
von: Z. T. Nazarchuk, et al.
Veröffentlicht: (2018)
Theoretical investigation on effect of boron on improving the hardness of zincblende-aluminium nitride and its mechanical, thermal and thermo-electric properties
von: E. Viswanathan, et al.
Veröffentlicht: (2019)
von: E. Viswanathan, et al.
Veröffentlicht: (2019)
Structure peculiarities of cubic boron nitride polycrystals manufactured by direct conversion sintering
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)
von: I. A. Petrusha, et al.
Veröffentlicht: (2017)
General meeting of the Ukrainian Society on Fracture Mechanics of Materials
von: I. M. Dmytrakh
Veröffentlicht: (2017)
von: I. M. Dmytrakh
Veröffentlicht: (2017)
Changing the performance of diamond finishing of ceramic balls of boron carbide and silicon nitride
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)
von: S. V. Sokhan, et al.
Veröffentlicht: (2021)
Low-temperature ion-plasma deposition technology of nanostructured films of aluminum and boron nitrides
von: M. S. Zaiats, et al.
Veröffentlicht: (2021)
von: M. S. Zaiats, et al.
Veröffentlicht: (2021)
On the Concentration Criterion of Fracture
von: Botvina, L.R., et al.
Veröffentlicht: (2017)
von: Botvina, L.R., et al.
Veröffentlicht: (2017)
The First Greek-Ukrainian Symposium on Fracture Mechanics of Materials and Structures
von: I. M. Dmytrakh, et al.
Veröffentlicht: (2010)
von: I. M. Dmytrakh, et al.
Veröffentlicht: (2010)
The Ukrainian-Greek Symposium on Fracture Mechanics of Materials and Strength of Structures
von: I. M. Dmytrakh, et al.
Veröffentlicht: (2011)
von: I. M. Dmytrakh, et al.
Veröffentlicht: (2011)
Ähnliche Einträge
-
HP-HT treatment of hexagonal boron nitride for higher photocatalytic degradation of organic pollutants
von: Cui Liang, et al.
Veröffentlicht: (2023) -
Study of damage accumulation mechanisms in reinforced aluminum-boron-steel composites during thermal cycling
von: Vishnyakov, L.R., et al.
Veröffentlicht: (2004) -
On the mechanism of hardening wurtzitic boron nitride under an indenter
von: G. S. Olejnik
Veröffentlicht: (2013) -
Tribological characteristics of superhard materials cubic boron nitride
von: A. A. Adamovskij, et al.
Veröffentlicht: (2015) -
Elastic properties and plasticity of the polycrystals and cutting composite materials on a base of cubic boron nitride
von: O. I. Zaporozhets, et al.
Veröffentlicht: (2019)