Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction

Using X-ray diffraction, strain measurement, scanning electron microscopy, and microprobe analysis, structure, composition and stress state were studied in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons prepared by one-side melt solidification on the rotating wheel. The macro-stresses have been found to...

Ausführliche Beschreibung

Gespeichert in:
Bibliographische Detailangaben
Veröffentlicht in:Functional Materials
Datum:2007
1. Verfasser: Malykhin, S.
Format: Artikel
Sprache:English
Veröffentlicht: НТК «Інститут монокристалів» НАН України 2007
Online Zugang:https://nasplib.isofts.kiev.ua/handle/123456789/136493
Tags: Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction / S. Malykhin // Functional Materials. — 2007. — Т. 14, № 2. — С. 223-227. — Бібліогр.: 22 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id nasplib_isofts_kiev_ua-123456789-136493
record_format dspace
spelling Malykhin, S.
2018-06-16T13:06:03Z
2018-06-16T13:06:03Z
2007
Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction / S. Malykhin // Functional Materials. — 2007. — Т. 14, № 2. — С. 223-227. — Бібліогр.: 22 назв. — англ.
1027-5495
https://nasplib.isofts.kiev.ua/handle/123456789/136493
Using X-ray diffraction, strain measurement, scanning electron microscopy, and microprobe analysis, structure, composition and stress state were studied in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons prepared by one-side melt solidification on the rotating wheel. The macro-stresses have been found to be distributed inhomogeneously across the ribbon section. On the side contacted with cooler, compressive stress up to 130 MPa acts, while the stress sign changes at the opposite side. The total level of residual stresses is defined by the quenching rate from melt. The observed peculiarities of stress distribution along the normal to solidification front are explained by temperature field inhomogeneity across the ribbons as well as by release of the solidification heat.
en
НТК «Інститут монокристалів» НАН України
Functional Materials
Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
Залишкові напруження у Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ квазікристалічних стрічках, отриманих солідифікацією із розплаву
Article
published earlier
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
title Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
spellingShingle Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
Malykhin, S.
title_short Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
title_full Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
title_fullStr Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
title_full_unstemmed Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction
title_sort residual stresses in ti₄₁¸₅zr₄₁¸₅ni₁₇ quasi-crystalline ribbons measured by x-ray diffraction
author Malykhin, S.
author_facet Malykhin, S.
publishDate 2007
language English
container_title Functional Materials
publisher НТК «Інститут монокристалів» НАН України
format Article
title_alt Залишкові напруження у Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ квазікристалічних стрічках, отриманих солідифікацією із розплаву
description Using X-ray diffraction, strain measurement, scanning electron microscopy, and microprobe analysis, structure, composition and stress state were studied in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons prepared by one-side melt solidification on the rotating wheel. The macro-stresses have been found to be distributed inhomogeneously across the ribbon section. On the side contacted with cooler, compressive stress up to 130 MPa acts, while the stress sign changes at the opposite side. The total level of residual stresses is defined by the quenching rate from melt. The observed peculiarities of stress distribution along the normal to solidification front are explained by temperature field inhomogeneity across the ribbons as well as by release of the solidification heat.
issn 1027-5495
url https://nasplib.isofts.kiev.ua/handle/123456789/136493
citation_txt Residual stresses in Ti₄₁¸₅Zr₄₁¸₅Ni₁₇ quasi-crystalline ribbons measured by X-ray diffraction / S. Malykhin // Functional Materials. — 2007. — Т. 14, № 2. — С. 223-227. — Бібліогр.: 22 назв. — англ.
work_keys_str_mv AT malykhins residualstressesinti415zr415ni17quasicrystallineribbonsmeasuredbyxraydiffraction
AT malykhins zališkovínapružennâuti415zr415ni17kvazíkristalíčnihstríčkahotrimanihsolídifíkacíêûízrozplavu
first_indexed 2025-12-07T19:35:58Z
last_indexed 2025-12-07T19:35:58Z
_version_ 1850879412212334592