Buchumschlag

Study of precision forging technology for complicated high strength aluminum alloy part

In order to investigate forging feasible of SC100-T6 high silicon aluminum alloy, its plastic deformation behavior during high temperature was studied by isothermal compression of cylindrical specimens using Gleeble-1500. The experiment was carried out over of deformation temperature form 390C to 49...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Functional Materials
Datum:	2017
Hauptverfasser:	Junwei Cheng, Xianzhang Feng, Li Sizhong, Guo Xiaoqin, Xia Juchen
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	НТК «Інститут монокристалів» НАН України 2017
Schlagworte:	Characterization and properties
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/136696
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Study of precision forging technology for complicated high strength aluminum alloy part / Junwei Cheng, Xianzhang Feng, Li Sizhong, Guo Xiaoqin, Xia Juchen // Functional Materials. — 2017. — Т. 24, № 1. — С. 56-62. — Бібліогр.: 16 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Highly-ordered nanoporous anodic aluminum oxide films
von: Voloshko, A.V., et al.
Veröffentlicht: (2012)

Defects related luminescence in yttrium-aluminum garnet crystals
von: Shiran, N., et al.
Veröffentlicht: (2016)

Influence of chemical components La and heat treatment on the microstructure and mechanical property of AlSi₇Mg aluminum alloy
von: Yongyue Liu
Veröffentlicht: (2018)

Features of J-aggregates formation in pores of nanostructured anodic aluminum oxide
von: Sorokin, A.V., et al.
Veröffentlicht: (2014)

Features of the occurrence and development of cracks in polycrystalline aluminum samples with different grain sizes
von: Badiyan, E.E., et al.
Veröffentlicht: (2019)

Substructure and orientation heterogeneity of polycrystalline aluminum and its changes during plastic deformation
von: Badiyan, E.E., et al.
Veröffentlicht: (2016)

The mechanical strength advance of radiation-hard plastic scintillators with diffusion enhancers
von: Velmozhnaya, E.S., et al.
Veröffentlicht: (2015)

Crystalline and thermal properties in miscible blends of PEEK, PPS and PEI obtained by melt compounding
von: Chen Jian-bing, et al.
Veröffentlicht: (2016)

Spectral properties of Er-doped yttrium aluminum garnet crystals grown by modified horizontal directional crystallization method
von: Nizhankovskyi, S.V., et al.
Veröffentlicht: (2018)

Structure and strength characteristics of dispersion-hardened composite foils (films) based on iron and nickel
von: Il′insky, A.I., et al.
Veröffentlicht: (2013)

Optical, thermal, strength properties and SHG efficiency of KDP single crystals doped with N,N'-dimethyl urea
von: Kostenyukova, E.I., et al.
Veröffentlicht: (2018)

Features of charge pairs recombination in the track regions of organic solid scintillators. Part II
von: Tarasenko, O.A.
Veröffentlicht: (2013)

Effect of Y addition on the microstructures and mechanical properties of Mg-Gd-Y-Sm-Zr alloys
von: Fu sanling, et al.
Veröffentlicht: (2017)

Degradation of lignin in cassava residue with Phanerochaete chrysosporium by solid state cultivation
von: Bin Xu, et al.
Veröffentlicht: (2016)

Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
von: Che Jialing, et al.
Veröffentlicht: (2017)

Structure, Crystallization and Thermal Behavior of Fluorinated ethylene propylene (FEP) based Plastics Composites
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)

Deep acceptor trapping centers in CdI₂-PbI₂ crystal system
von: Galchynsky, O.V., et al.
Veröffentlicht: (2014)

Optimization of preparation process and performance analysis of fly ash foam glass
von: Zipeng Qin, et al.
Veröffentlicht: (2018)

Luminescent photonic crystals
von: Klimonsky, S.O., et al.
Veröffentlicht: (2009)

Magnetic oscillations of longitudinal sound in iron borate
von: Khizhnyi, V.I., et al.
Veröffentlicht: (2010)

Experimental and theoretical analysis of fatigue properties of liner for the large pressure equipment
von: Feng Xianzhang, et al.
Veröffentlicht: (2016)

Flexible impulse response of the multi-bar linkage with heavy load
von: Feng Xianzhang, et al.
Veröffentlicht: (2016)

Crystal structure and electrical resistance of Ni-W alloys
von: Derevyanko, V.V., et al.
Veröffentlicht: (2018)

Structural features of iron vacuum condensates alloyed with tungsten
von: Barmin, A.E., et al.
Veröffentlicht: (2012)

Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
von: Ved', M.V., et al.
Veröffentlicht: (2016)

Catalytic properties of binary and ternary alloys based on silver
von: Ved, M., et al.
Veröffentlicht: (2013)

Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
von: Ved', M.V., et al.
Veröffentlicht: (2016)

Nanocrystalline alloys with high magnetic properties and high temperature stability
von: Noskova, N.I., et al.
Veröffentlicht: (2010)

Functional properties of multicomponent galvanic alloys of iron with molybdenum and tungsten
von: Karakurkchi, A.V., et al.
Veröffentlicht: (2015)

Structure and properties of solid BK6-OM alloy after electrosintering
von: Prokopiv, N.M., et al.
Veröffentlicht: (2018)

Radiation resistance of Ti—20Zr alloy in microcrystalline and nanocrystalline state
von: Belous, V.A., et al.
Veröffentlicht: (2013)

Magnetic properties of modified amorfous and nanocrystalline alloys based on Fe and Co
von: Filippov, B.N., et al.
Veröffentlicht: (2012)

Control of the solid solution decay by heat treatments of deformed niobium-titanium alloys
von: Chirkina, L.A., et al.
Veröffentlicht: (2013)

Dynamics of magnetic and electric parameters transformation in thin films of sodium-doped lanthanum manganites
von: Pan'kiv, L.I., et al.
Veröffentlicht: (2012)

Magnetic and Invar properties of Fe-35 %Ni alloy after grinding of structure by hydroextrusion
von: Nadutov, V.M., et al.
Veröffentlicht: (2012)

Effect of ultrasonic impact treatment on creep characteristics and evolution of Zr1Nb alloy nanostructure
von: Sokolenko, V.I., et al.
Veröffentlicht: (2018)

The second critical magnetic field of multilayered conductors with nano-layers of superconducting Nb-Ti alloys
von: Korzhov, V.P., et al.
Veröffentlicht: (2010)

The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
von: Tulay Yildiz, et al.
Veröffentlicht: (2018)

Obtaining of ZnSe nanocrystals from ZnSe bulk crystals by mechanical milling and chemical vapor deposition in silica matrices
von: Voloshina, L.I., et al.
Veröffentlicht: (2017)

Synthesis, characterization and electrical properties of Pb(₈₋x)Na₂Ndx(VO₄)₆O(x/₂) solid solutions
von: Getman, E.I., et al.
Veröffentlicht: (2014)