Fabrication and mechanical performance of 3D woven basalt fiber composite materials
Three kinds differently structural 3D woven fabrics with the basalt fiber filaments tows as warp and weft yarn were fabricated on common loom by reasonable design. And, three kinds differently structural 3D woven basalt fiber composite materials were obtained with vinyl ester resin as matrix materia...
Gespeichert in:
| Veröffentlicht in: | Functional Materials |
|---|---|
| Datum: | 2017 |
| Hauptverfasser: | Lihua Lv, Xuefei Zhang, Fang Ye, Yongfang Qian, Yuping Zhao, Guibin Liu |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
НТК «Інститут монокристалів» НАН України
2017
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/136704 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Fabrication and mechanical performance of 3D woven basalt fiber composite materials / Lihua Lv, Xuefei Zhang, Fang Ye, Yongfang Qian, Yuping Zhao, Guibin Liu // Functional Materials. — 2017. — Т. 24, № 1. — С. 76-81. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Fabrication and characterization of palm sugar tree (Arenga pinnata) fiber composites reinforced by polyester resin
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019)
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019)
A study of effect of injection molding process parameters on the impact performance of plastic product fabricated by fine fillers filled LDPE
von: Hua Cai, et al.
Veröffentlicht: (2016)
von: Hua Cai, et al.
Veröffentlicht: (2016)
Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
von: Che Jialing, et al.
Veröffentlicht: (2017)
von: Che Jialing, et al.
Veröffentlicht: (2017)
The mechanical performance of glass fibre reinforced composite based sandwich structure
von: Xiaoli Zhu
Veröffentlicht: (2018)
von: Xiaoli Zhu
Veröffentlicht: (2018)
Fabrication and electrical characteristics of nano black phosphorus thin film transistor
von: Wang Lie-long
Veröffentlicht: (2016)
von: Wang Lie-long
Veröffentlicht: (2016)
Micro-nano zinc nitrate hexahydrate film fabricated by biomimetic mineralization
von: Lu, F., et al.
Veröffentlicht: (2019)
von: Lu, F., et al.
Veröffentlicht: (2019)
Zakarpatskiy perlit as component of mineral woven fabric material
von: O. O. Tytova, et al.
Veröffentlicht: (2019)
von: O. O. Tytova, et al.
Veröffentlicht: (2019)
Thermionic emission of LaB₆–ZrB₂ quasi-binary eutectic alloy with different ZrB₂ fibers orientation
von: Taran, A., et al.
Veröffentlicht: (2013)
von: Taran, A., et al.
Veröffentlicht: (2013)
Experimental study on full-penetration friction stir welding of 2219 aluminum alloy
von: Sun Qian, et al.
Veröffentlicht: (2018)
von: Sun Qian, et al.
Veröffentlicht: (2018)
Biocidicity of paper and basalt fiber
von: V. M. Shevchenko, et al.
Veröffentlicht: (2019)
von: V. M. Shevchenko, et al.
Veröffentlicht: (2019)
Optimization of preparation process and performance analysis of fly ash foam glass
von: Zipeng Qin, et al.
Veröffentlicht: (2018)
von: Zipeng Qin, et al.
Veröffentlicht: (2018)
Influence of growth conditions on chemical composition and properties of borate crystals for laser application
von: Baumer, V.N., et al.
Veröffentlicht: (2016)
von: Baumer, V.N., et al.
Veröffentlicht: (2016)
Surface modification of calcium carbonate nanoparticles as hydraulic oil additives friction performance research
von: Yuan-sheng Ding, et al.
Veröffentlicht: (2018)
von: Yuan-sheng Ding, et al.
Veröffentlicht: (2018)
Comparative study of two rolling bond process for super-thick Q235B
von: Guanghui Zhao, et al.
Veröffentlicht: (2016)
von: Guanghui Zhao, et al.
Veröffentlicht: (2016)
The experimental research on axial compression performance of concrete-filled steel square tube strengthened by internal transverse stiffened bars
von: Nan Li, et al.
Veröffentlicht: (2017)
von: Nan Li, et al.
Veröffentlicht: (2017)
Basalt fiber based biocide materials
von: V. M. Shevchenk, et al.
Veröffentlicht: (2021)
von: V. M. Shevchenk, et al.
Veröffentlicht: (2021)
Fungi-resistant basalt fiber material
von: V. M. Shevchenko, et al.
Veröffentlicht: (2020)
von: V. M. Shevchenko, et al.
Veröffentlicht: (2020)
Radiation damage of isotactic polypropylene composites with multi-walled carbon nanotubes
von: Diyakon, L.V., et al.
Veröffentlicht: (2008)
von: Diyakon, L.V., et al.
Veröffentlicht: (2008)
Influence of chemical components La and heat treatment on the microstructure and mechanical property of AlSi₇Mg aluminum alloy
von: Yongyue Liu
Veröffentlicht: (2018)
von: Yongyue Liu
Veröffentlicht: (2018)
Light transmission through the material of composite scintillator
von: Karavaeva, N.L., et al.
Veröffentlicht: (2012)
von: Karavaeva, N.L., et al.
Veröffentlicht: (2012)
Study of radiation-resistant gel bases for composite detectors
von: Boyarintsev, A.Yu., et al.
Veröffentlicht: (2013)
von: Boyarintsev, A.Yu., et al.
Veröffentlicht: (2013)
Structure of Cu-In-Se thin films of variable composition
von: Grigorov, S.N., et al.
Veröffentlicht: (2009)
von: Grigorov, S.N., et al.
Veröffentlicht: (2009)
Optical and scintillation properties of stilbene polycrystalline and composite materials
von: Galunov, N.Z., et al.
Veröffentlicht: (2015)
von: Galunov, N.Z., et al.
Veröffentlicht: (2015)
Contact relaxation phenomena in nano-structured composite materials
von: Boyko, Yu.I., et al.
Veröffentlicht: (2015)
von: Boyko, Yu.I., et al.
Veröffentlicht: (2015)
Perspectives of development of X-ray analysis for material composition
von: Mikhailov, I.F., et al.
Veröffentlicht: (2016)
von: Mikhailov, I.F., et al.
Veröffentlicht: (2016)
Thin film Si:Eu and Si:Y composites
von: Koval, V.M., et al.
Veröffentlicht: (2010)
von: Koval, V.M., et al.
Veröffentlicht: (2010)
The structure, phase and chemical composition of CZTSe thin films
von: Opanasyuk, A.S., et al.
Veröffentlicht: (2014)
von: Opanasyuk, A.S., et al.
Veröffentlicht: (2014)
Titanium-based high-melting nanodispersed compositions obtaining and study
von: Bolshakov, V.I., et al.
Veröffentlicht: (2018)
von: Bolshakov, V.I., et al.
Veröffentlicht: (2018)
Investigation of vibration anharmonicity in the crystal lattice of the mixed composition apatites
von: Karbivskyy, V.L., et al.
Veröffentlicht: (2011)
von: Karbivskyy, V.L., et al.
Veröffentlicht: (2011)
Determination of chemical composition of implanted nanolayers by analysis of their optical properties
von: Mysiura, I.N., et al.
Veröffentlicht: (2012)
von: Mysiura, I.N., et al.
Veröffentlicht: (2012)
Research on stress intensity factors of elliptical hole in infinite body
von: Baoliang Liu, et al.
Veröffentlicht: (2016)
von: Baoliang Liu, et al.
Veröffentlicht: (2016)
Effects of matrix composition and Eu³⁺ concentration on luminescence properties of phosphate glass
von: Polisadova, E.F., et al.
Veröffentlicht: (2013)
von: Polisadova, E.F., et al.
Veröffentlicht: (2013)
Effect of the reaction mixture composition on CdS/L-cys nanoparticles optical properties
von: Krupko, O.V., et al.
Veröffentlicht: (2011)
von: Krupko, O.V., et al.
Veröffentlicht: (2011)
Galvanic ternary Fe-Co-W coatings: structure, composition and magnetic properties
von: Yermolenko, I.Yu., et al.
Veröffentlicht: (2018)
von: Yermolenko, I.Yu., et al.
Veröffentlicht: (2018)
Specificity of radioluminescence of polycrystalline and composite scintillators based on organic single crystals granules
von: Gorbacheva, T.E.
Veröffentlicht: (2014)
von: Gorbacheva, T.E.
Veröffentlicht: (2014)
Sprayed substance transfer and hard-melting composition formation in ion plasma system
von: Vasilenko, N.A., et al.
Veröffentlicht: (2012)
von: Vasilenko, N.A., et al.
Veröffentlicht: (2012)
Impedance spectroscopy of composites based on porous silicon and silica aerogel for sensor applications
von: Karlash, A.Yu., et al.
Veröffentlicht: (2013)
von: Karlash, A.Yu., et al.
Veröffentlicht: (2013)
Structure, Crystallization and Thermal Behavior of Fluorinated ethylene propylene (FEP) based Plastics Composites
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)
von: Gevorkyan, E., et al.
Veröffentlicht: (2017)
Structure and strength characteristics of dispersion-hardened composite foils (films) based on iron and nickel
von: Il′insky, A.I., et al.
Veröffentlicht: (2013)
von: Il′insky, A.I., et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Fabrication and characterization of palm sugar tree (Arenga pinnata) fiber composites reinforced by polyester resin
von: Timbangen Sembiring, et al.
Veröffentlicht: (2019) -
A study of effect of injection molding process parameters on the impact performance of plastic product fabricated by fine fillers filled LDPE
von: Hua Cai, et al.
Veröffentlicht: (2016) -
Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
von: Che Jialing, et al.
Veröffentlicht: (2017) -
The mechanical performance of glass fibre reinforced composite based sandwich structure
von: Xiaoli Zhu
Veröffentlicht: (2018) -
Fabrication and electrical characteristics of nano black phosphorus thin film transistor
von: Wang Lie-long
Veröffentlicht: (2016)