Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy
The influence of hydrogen saturation temperature on the structure and phase composition of the melt-spun Ti₃₀Zr₄₅Ni₂₅ alloys, heat-treated in hydrogen atmosphere at different temperatures (400, 450, 500 °C) for 4 hours, was studied. Using X-ray diffraction analysis it was found that hydrides, formed...
Збережено в:
| Опубліковано в: : | Вопросы атомной науки и техники |
|---|---|
| Дата: | 2018 |
| Автори: | , |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Національний науковий центр «Харківський фізико-технічний інститут» НАН України
2018
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/137374 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy / O.Ye. Dmytrenko, I.V. Kolodiy // Вопросы атомной науки и техники. — 2018. — № 1. — С. 162-168. — Бібліогр.: 12 назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1862665676686098432 |
|---|---|
| author | Dmytrenko, O.Ye. Kolodiy, I.V. |
| author_facet | Dmytrenko, O.Ye. Kolodiy, I.V. |
| citation_txt | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy / O.Ye. Dmytrenko, I.V. Kolodiy // Вопросы атомной науки и техники. — 2018. — № 1. — С. 162-168. — Бібліогр.: 12 назв. — англ. |
| collection | DSpace DC |
| container_title | Вопросы атомной науки и техники |
| description | The influence of hydrogen saturation temperature on the structure and phase composition of the melt-spun Ti₃₀Zr₄₅Ni₂₅ alloys, heat-treated in hydrogen atmosphere at different temperatures (400, 450, 500 °C) for 4 hours, was studied. Using X-ray diffraction analysis it was found that hydrides, formed during the hydrogenation process, were based on the Laves phase L-TiZrNi and (Ti, Zr)₂Ni, α-(Ti, Zr) phases. Structural models of these phases were constructed and a model for filling these phases with hydrogen was presented. Electron microscopic study showed that the surface of the samples had no significant changes during the hydrogenation process. Also, it was established the influence of the hydrogenation temperature on the concentration of oxygen and nitrogen gas impurities in the samples.
Проведено дослідження впливу температури насичення воднем на структурно-фазовий склад зразків швидкозагартованого сплаву Ti₃₀Zr₄₅Ni₂₅ після термообробки в атмосфері водню при різних температурах (400, 450, 500 °С) протягом 4 год. Методом рентгеноструктурного аналізу встановлено, що в процесі насичення воднем утворюються гідриди на основі фази Лавеса L-TiZrNi (С14), фази (Ti,Zr)₂Ni та α-(Ti, Zr). Побудовано структурні моделі фаз, присутніх у досліджуваних зразках, і представлена модель заповнення цих фаз воднем. Проведено електронно-мікроскопічне дослідження поверхні зразків і показано, що поверхня зразків не зазнає істотних змін у процесі насичення воднем. Встановлено вплив температури насичення воднем на концентрацію газових домішок кисню та азоту.
Проведено исследование влияния температуры насыщения водородом на структурно-фазовый состав образцов быстрозакаленного сплава Ti₃₀Zr₄₅Ni₂₅, подвергнутых термообработке в атмосфере водорода, при различных температурах (400, 450, 500 °С) в течение 4 ч. Методом рентгеноструктурного анализа установлено, что в процессе наводорoживания образуются гидриды на основе фазы Лавеса L-TiZrNi (С14), фазы (Ti, Zr)₂Ni и α-(Ti, Zr). Построены структурные модели фаз, присутствующих в исследуемых образцах, и представлена модель заполнения этих фаз водородом. Проведено электронно-микроскопическое исследование поверхности образцов и показано, что поверхность образцов не претерпевает существенных изменений в процессе насыщения водородом. Установлено влияние температуры наводорoживания на концентрацию газовых примесей кислорода и азота.
|
| first_indexed | 2025-12-07T15:17:18Z |
| format | Article |
| fulltext | |
| id | nasplib_isofts_kiev_ua-123456789-137374 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 1562-6016 |
| language | English |
| last_indexed | 2025-12-07T15:17:18Z |
| publishDate | 2018 |
| publisher | Національний науковий центр «Харківський фізико-технічний інститут» НАН України |
| record_format | dspace |
| spelling | Dmytrenko, O.Ye. Kolodiy, I.V. 2018-06-17T10:40:59Z 2018-06-17T10:40:59Z 2018 Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy / O.Ye. Dmytrenko, I.V. Kolodiy // Вопросы атомной науки и техники. — 2018. — № 1. — С. 162-168. — Бібліогр.: 12 назв. — англ. 1562-6016 https://nasplib.isofts.kiev.ua/handle/123456789/137374 544.723; 669.788 The influence of hydrogen saturation temperature on the structure and phase composition of the melt-spun Ti₃₀Zr₄₅Ni₂₅ alloys, heat-treated in hydrogen atmosphere at different temperatures (400, 450, 500 °C) for 4 hours, was studied. Using X-ray diffraction analysis it was found that hydrides, formed during the hydrogenation process, were based on the Laves phase L-TiZrNi and (Ti, Zr)₂Ni, α-(Ti, Zr) phases. Structural models of these phases were constructed and a model for filling these phases with hydrogen was presented. Electron microscopic study showed that the surface of the samples had no significant changes during the hydrogenation process. Also, it was established the influence of the hydrogenation temperature on the concentration of oxygen and nitrogen gas impurities in the samples. Проведено дослідження впливу температури насичення воднем на структурно-фазовий склад зразків швидкозагартованого сплаву Ti₃₀Zr₄₅Ni₂₅ після термообробки в атмосфері водню при різних температурах (400, 450, 500 °С) протягом 4 год. Методом рентгеноструктурного аналізу встановлено, що в процесі насичення воднем утворюються гідриди на основі фази Лавеса L-TiZrNi (С14), фази (Ti,Zr)₂Ni та α-(Ti, Zr). Побудовано структурні моделі фаз, присутніх у досліджуваних зразках, і представлена модель заповнення цих фаз воднем. Проведено електронно-мікроскопічне дослідження поверхні зразків і показано, що поверхня зразків не зазнає істотних змін у процесі насичення воднем. Встановлено вплив температури насичення воднем на концентрацію газових домішок кисню та азоту. Проведено исследование влияния температуры насыщения водородом на структурно-фазовый состав образцов быстрозакаленного сплава Ti₃₀Zr₄₅Ni₂₅, подвергнутых термообработке в атмосфере водорода, при различных температурах (400, 450, 500 °С) в течение 4 ч. Методом рентгеноструктурного анализа установлено, что в процессе наводорoживания образуются гидриды на основе фазы Лавеса L-TiZrNi (С14), фазы (Ti, Zr)₂Ni и α-(Ti, Zr). Построены структурные модели фаз, присутствующих в исследуемых образцах, и представлена модель заполнения этих фаз водородом. Проведено электронно-микроскопическое исследование поверхности образцов и показано, что поверхность образцов не претерпевает существенных изменений в процессе насыщения водородом. Установлено влияние температуры наводорoживания на концентрацию газовых примесей кислорода и азота. Authors thank gratefully to O.M. Bovda for the sample fabrication and R.V. Azhazha for oxygen and nitrogen content measurements. Also, special thanks to M.A. Tikhonovsky and M.M. Pylypenko for the help in discussing the results. en Національний науковий центр «Харківський фізико-технічний інститут» НАН України Вопросы атомной науки и техники Физика и технология конструкционных материалов Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy Вплив температури насичення воднем на структуру швидкозагартованого сплаву Ti₃₀Zr₄₅Ni₂₅ Влияние температуры насыщения водородом на структуру быстрозакаленного сплава Ti₃₀Zr₄₅Ni₂₅ Article published earlier |
| spellingShingle | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy Dmytrenko, O.Ye. Kolodiy, I.V. Физика и технология конструкционных материалов |
| title | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy |
| title_alt | Вплив температури насичення воднем на структуру швидкозагартованого сплаву Ti₃₀Zr₄₅Ni₂₅ Влияние температуры насыщения водородом на структуру быстрозакаленного сплава Ti₃₀Zr₄₅Ni₂₅ |
| title_full | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy |
| title_fullStr | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy |
| title_full_unstemmed | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy |
| title_short | Influence of the hydrogen saturation temperature on the structure of melt-spun Ti₃₀Zr₄₅Ni₂₅ alloy |
| title_sort | influence of the hydrogen saturation temperature on the structure of melt-spun ti₃₀zr₄₅ni₂₅ alloy |
| topic | Физика и технология конструкционных материалов |
| topic_facet | Физика и технология конструкционных материалов |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/137374 |
| work_keys_str_mv | AT dmytrenkooye influenceofthehydrogensaturationtemperatureonthestructureofmeltspunti30zr45ni25alloy AT kolodiyiv influenceofthehydrogensaturationtemperatureonthestructureofmeltspunti30zr45ni25alloy AT dmytrenkooye vplivtemperaturinasičennâvodnemnastrukturušvidkozagartovanogosplavuti30zr45ni25 AT kolodiyiv vplivtemperaturinasičennâvodnemnastrukturušvidkozagartovanogosplavuti30zr45ni25 AT dmytrenkooye vliânietemperaturynasyŝeniâvodorodomnastrukturubystrozakalennogosplavati30zr45ni25 AT kolodiyiv vliânietemperaturynasyŝeniâvodorodomnastrukturubystrozakalennogosplavati30zr45ni25 |