Fatigue properties of notched specimens made of FeP04 steel
Fatigue properties of the specimens with different notches made of FeP04 steel are presented. The specimens ware characterized by double symmetric lateral notches with a notch root radius ranging from ρ = 0.2 to 10 mm. The MTS 809 servo-hydraulic device was used for tests. All fatigue tests were per...
Gespeichert in:
| Veröffentlicht in: | Фізико-хімічна механіка матеріалів |
|---|---|
| Datum: | 2011 |
| Hauptverfasser: | Rozumek, D., Marciniak, Z. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2011
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/138216 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Fatigue properties of notched specimens made of FeP04 steel / D. Rozumek, Z. Marciniak // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 4. — С. 41-46. — Бібліогр.: 9 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Fatigue properties of notched specimens made of FeP04 steel
von: D. Rozumek, et al.
Veröffentlicht: (2011)
von: D. Rozumek, et al.
Veröffentlicht: (2011)
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017)
von: D. Rozumek, et al.
Veröffentlicht: (2017)
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010)
von: Rozumek, D., et al.
Veröffentlicht: (2010)
Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010)
von: D. Rozumek, et al.
Veröffentlicht: (2010)
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)
Notch Effect on the Fatigue Behavior of a Hot Dip Galvanized Structural Steel
von: Berto, F., et al.
Veröffentlicht: (2015)
von: Berto, F., et al.
Veröffentlicht: (2015)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
von: Derpenski, L., et al.
Veröffentlicht: (2013)
von: Derpenski, L., et al.
Veröffentlicht: (2013)
Numerical analysis of strain and stress state in cylindrical notched tensile specimens
von: L. Derpenski, et al.
Veröffentlicht: (2013)
von: L. Derpenski, et al.
Veröffentlicht: (2013)
Fatigue life of specimens from 40KH steel after wear-resistant
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
von: V. V. Knysh, et al.
Veröffentlicht: (2021)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
von: Torabi, A.R., et al.
Veröffentlicht: (2013)
von: Torabi, A.R., et al.
Veröffentlicht: (2013)
Fracture Assessment of Blunt V-Notched Graphite Specimens by Means of the Strain Energy Density
von: A. R. Torabi, et al.
Veröffentlicht: (2013)
von: A. R. Torabi, et al.
Veröffentlicht: (2013)
Fatigue life of steel specimens 40KH after wear-resistant surfacing with a sublayer of low-carbon steel
von: I. O. Riabtsev, et al.
Veröffentlicht: (2021)
von: I. O. Riabtsev, et al.
Veröffentlicht: (2021)
Recrystallization texture and anisotropy of elastic properties of DC04 steel sheets
von: N. A. Volchok, et al.
Veröffentlicht: (2024)
von: N. A. Volchok, et al.
Veröffentlicht: (2024)
Review of formulas to describe the fatigue crack growth rate
von: D. Rozumek
Veröffentlicht: (2013)
von: D. Rozumek
Veröffentlicht: (2013)
Review of formulas to describe the fatigue crack growth rate
von: Rozumek, D.
Veröffentlicht: (2013)
von: Rozumek, D.
Veröffentlicht: (2013)
Methods and specimens for comparative studies of fatigue resistance of parts with multilayer surfacing
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2019)
von: I. A. Rjabtsev, et al.
Veröffentlicht: (2019)
A specimen for fatigue thresholds determination under cyclic transverse shear
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2019)
von: O. P. Datsyshyn, et al.
Veröffentlicht: (2019)
Comparison of fatigue criteria for combined bending-torsion loading of nitrided and virgin specimens
von: Major, S., et al.
Veröffentlicht: (2008)
von: Major, S., et al.
Veröffentlicht: (2008)
Structure, Crystallization and Thermal Behavior of Fluorinated ethylene propylene (FEP) based Plastics Composites
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
von: Chen Jian-bing, et al.
Veröffentlicht: (2018)
Modeling and Numerical Simulation of Fatigue Crack Growth in Cracked Specimens Containing Material Discontinuities
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
von: Jameel, Azher, et al.
Veröffentlicht: (2016)
Fatigue resistance of welded elements of freight cars of a new design made from steels of S345 and S390 grade
von: A. G. Rejdemejster, et al.
Veröffentlicht: (2018)
von: A. G. Rejdemejster, et al.
Veröffentlicht: (2018)
Investigation of the microstructure and properties of TRIP 800 steel subjected to low-cycle fatigue
von: Z. M. Rykavets, et al.
Veröffentlicht: (2019)
von: Z. M. Rykavets, et al.
Veröffentlicht: (2019)
Investigation of the microstructure and properties of TRIP 800 steel subjected to low-cycle fatigue
von: Rykavets, Z.M., et al.
Veröffentlicht: (2019)
von: Rykavets, Z.M., et al.
Veröffentlicht: (2019)
Evaluation of the kinetics of fatigue fracture by automated analysis of the deformation relief on the surface of specimen with a central hole
von: P. O. Marushchak, et al.
Veröffentlicht: (2014)
von: P. O. Marushchak, et al.
Veröffentlicht: (2014)
Stresses in anisotropic halfplane with notches
von: O. V. Maksymovych, et al.
Veröffentlicht: (2015)
von: O. V. Maksymovych, et al.
Veröffentlicht: (2015)
Mechanical and fatigue properties of CFRP plate reinforced steel structural interface
von: Hua Zhu
Veröffentlicht: (2018)
von: Hua Zhu
Veröffentlicht: (2018)
Assessment of steam pipeline steels degradation by impact toughness on the specimens with a cut of different-geometry
von: H. V. Krechkovska, et al.
Veröffentlicht: (2016)
von: H. V. Krechkovska, et al.
Veröffentlicht: (2016)
The Effect of Notch Tip Position on the Charpy Impact Energy for Bainitic and Martensitic Functionally Graded Steel
von: Eskandari Jam, J., et al.
Veröffentlicht: (2014)
von: Eskandari Jam, J., et al.
Veröffentlicht: (2014)
Brittle Mixed-Mode (I+II) Fracture: Application of the Equivalent Notch Stress Intensity Factor to the Cracks Emanating From Notches
von: Minor, H. El, et al.
Veröffentlicht: (2002)
von: Minor, H. El, et al.
Veröffentlicht: (2002)
Notch122, мутация локуса Notch типа Abruptex у Drosophila virilis: особенности генетических взаимодействий
von: Губенко, И.С., et al.
Veröffentlicht: (2010)
von: Губенко, И.С., et al.
Veröffentlicht: (2010)
Detection of acoustic-emission effects during reloading of St3sp steel specimens
von: V. L. Aleksenko, et al.
Veröffentlicht: (2017)
von: V. L. Aleksenko, et al.
Veröffentlicht: (2017)
Features of structure formation and properties of joints of S460M steel, made by pulsed-arc welding
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
von: A. V. Zavdovieiev, et al.
Veröffentlicht: (2020)
Large-Scale Yielding Failure Prediction of Notched Ductile Plates by Means of the Linear Elastic Notch Fracture Mechanics
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
von: Torabi, A.R., et al.
Veröffentlicht: (2017)
Structure and properties of steel 10G2FB welded joints made by arc welding
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)
von: S. L. Zhdanov, et al.
Veröffentlicht: (2010)
Corrosion fatigue fracture of steels of railway wheels
von: I. M. Andreiko, et al.
Veröffentlicht: (2011)
von: I. M. Andreiko, et al.
Veröffentlicht: (2011)
In memory of Petro Oleksiyovych Burtnyi (04.08.1941―09.04.2024)
von: Starostenko, V.I., et al.
Veröffentlicht: (2024)
von: Starostenko, V.I., et al.
Veröffentlicht: (2024)
Increase of fatigue resistance of thin-sheet aluminium alloy overlap joints made by fusion welding
von: V. V. Knysh, et al.
Veröffentlicht: (2013)
von: V. V. Knysh, et al.
Veröffentlicht: (2013)
Ähnliche Einträge
-
Fatigue properties of notched specimens made of FeP04 steel
von: D. Rozumek, et al.
Veröffentlicht: (2011) -
Influence of notch radius on fatigue crack propagation in beam specimens of 2017A-T4 alloy
von: D. Rozumek, et al.
Veröffentlicht: (2017) -
Fatigue crack growth in AlCu4Mg1 under nonproportional bending with torsion loading
von: Rozumek, D., et al.
Veröffentlicht: (2010) -
Fatigue crack growth in AlCu4Mg1 under non-proportional bending with torsion loading
von: D. Rozumek, et al.
Veröffentlicht: (2010) -
Fatigue Assessment of Ti–6Al–4V Circular Notched Specimens Produced by Selective Laser Melting
von: Razavi, S.M.J., et al.
Veröffentlicht: (2017)