List of papers published in “Physicochemical Mechanics of Materials” in 2011
Збережено в:
| Опубліковано в: : | Фізико-хімічна механіка матеріалів |
|---|---|
| Дата: | 2011 |
| Формат: | Стаття |
| Мова: | Англійська |
| Опубліковано: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2011
|
| Теми: | |
| Онлайн доступ: | https://nasplib.isofts.kiev.ua/handle/123456789/138352 |
| Теги: |
Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Цитувати: | List of papers published in “Physicochemical Mechanics of Materials” in 2011 // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 6. — С. 135-138.назв. — англ. |
Репозитарії
Digital Library of Periodicals of National Academy of Sciences of Ukraine| _version_ | 1859863668962885632 |
|---|---|
| citation_txt | List of papers published in “Physicochemical Mechanics of Materials” in 2011 // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 6. — С. 135-138.назв. — англ. |
| collection | DSpace DC |
| container_title | Фізико-хімічна механіка матеріалів |
| first_indexed | 2025-12-07T15:47:11Z |
| format | Article |
| fulltext |
135
Ô³çèêî-õ³ì³÷íà ìåõàí³êà ìàòåð³àë³â – 2011. – ¹ 6. – Physicochemical Mechanics of Materials
LIST OF PAPERS PUBLISHED IN “PHYSICOCHEMICAL MECHANICS
OF MATERIALS” IN 2011
Nazarchuk Z. T. and Syniavskyi A. T. Approximation of the solution of the reverse
problem of electromagnetic waves scattering on plane dielectrics .................................... 1 7
Klepko V. V., Kolupaev B. B., Lysenkov E. A., and Voloshin M. O. Viscoelastic
properties of the filled polyethylene glycol in the megahertz frequency range.................. 1 18
Balitskii O. I., Chmiel J., and Dorobczyński L. Analysis of electrochemical
oscillations in vibration cavitation conditions.................................................................... 1 24
Matsko I. Y., Kravets I. B., and Javorskyj I. M. The investigation of vibration signal
structure of mechanical systems during defect growth ...................................................... 1 29
Pasternak Ya. M. and Sulym H. T. Solution of antiplane shear problems for solids
containing thin ribbon-like inclusions by integral equation methods.
I. General correlation ......................................................................................................... 1 37
Chernets M. V., Kelbinski Yu., and Yarema R. Ya. A generalized method
for evaluation of cylindrical involute gear wear ................................................................ 1 44
Kutsei M. Nonstationary frictional heat formation under a composite strip sliding
over a semi-space surface .................................................................................................. 1 50
Stamenović M., Putić S., Drmanić S., Rakin M., and Medjo B. The influence of service
solutions on longitudinal and circumferential tensile properties of glass-polyester
composite pipes ................................................................................................................. 1 57
Bohdanovych O. V. and Veselukha V. M. Fatigue crack growth resistance
of long-term operated steel of the main oil pipeline .......................................................... 1 65
Ivaskevych L. M. The influence of temperature and cyclic loading
on hydrogen embrittlement of nickel heat-resistant alloys................................................. 1 70
Lesiuk G. and Szata M. Aspects of structural degradation in old bridge steels by means
of fatigue crack propagation .............................................................................................. 1 76
Rozumek D. and Hepner M. Influence of oxygenation time on crack growth
in titanium alloy under cyclic bending............................................................................... 1 82
Novytskyi V. H., Havryliuk V. P., Shatrava O. P., Panasenko D. D., Khoruzhyi V. Ya.,
and Kalchuk M. O. Structure and tribological characteristics of heterogeneous
alloy before and after laser treatment................................................................................. 1 87
Dolinska I. Ya. Determination of the residual life of steam turbine wheels
under time-alternating loading........................................................................................... 1 94
Hnyp I. P., Zin Ya. I., and Bilyi L. M. On the influence of inhibitors on the resistance
of polymer anticorrosion coatings to cathode lamination .................................................. 1 98
Yan Aijun, Hou Juanling, Chen Yi, and Feng Lajund. Study on soil corrosion
principles of the Q235 steel ground net in Weinan Shaanxi .............................................. 1 104
H. V. Karpenko Physico-Mechanical Institute of the National Academy
of Sciences of Ukraine (To the 60-th anniversary of foundation)...................................... 2 5
Kryzhanivskyi Ye. I. and Nykyforchyn H. M. Peculiarities of corrosion-hydrogen
degradation of oil and gas pipelines and oil tanks ............................................................. 2 11
Pokhmurskii V. I., Kornii S. A., and Kopylets V. I. The use of quantum-chemical
approach to the study of corrosion on metal and alloy surfaces......................................... 2 21
Ivanytskyi Ya. L. Evaluation of strength of structural materials with cracks
under complex-mode loading ............................................................................................ 2 33
Kuryliak D. B. and Nazarchuk Z. T. Development of the methods of analytical
regularization in the diffraction theory .............................................................................. 2 42
Kit H. S., Kushnir R. M., Mykhaskiv V. V., and Nykolyshyn M. M. Methods for deter-
mination of static and dynamic stresses in bodies with sub-surface cracks ....................... 2 56
Datsyshyn O. P. Modelling of initiation of contact-fatigue damages and evaluation
of tribo-couple elements life. ............................................................................................. 2 67
Fedorov V. V. Hydrogen permeability of reactor steels .............................................................. 2 79
Sylovanyuk V. P. and Halazyuk O. V. Calculation model of a body
with a crack “healed” by injection ..................................................................................... 2 88
Hurka A. and Kocanda D. Mass-transfer in high-gradient field during friction welding
and modification of the upper layer ................................................................................... 2 93
136
Yasniy P. V., Maruschak P. O., Pylypenko A. P., Bishchak R. T., Zakiyev I. M.,
and Hlado V. B. Diagnostics of serviceability of heat-resistance steel
of metallurgical equipment after thermocycling ................................................................ 2 99
Koshovyy V. V., Romanyshyn I. M., Mokryy O. M., and Romanyshyn R. I. Development of
ultrasonic tomography technologies for technical diagnostics of structural materials ....... 2 109
Dzhala R. M. and Verbenets B. Ya. Electromagnetic method and means
of non-destructive observation of underground pipelines corrosion protection ................. 2 117
Rusyn B. P., Varetskyy Ya. Yu., Lysak Yu. V., and Pokhmurskii A. Yu. Reconstruction
and quantitative analysis of metal surfaces with pits based on improved image
matching method ............................................................................................................... 2 126
Javorskyj I. M., Drabych P. P., Kravets I. B., and Matsko I. Yo. Methods
of vibration diagnostics of the initial stages of rotation systems damage .......................... 2 134
Andreikiv O. Ye., Dolinska I. Ya., and Yavorska N. V. Estimation of the periods
of creep-fatigue crack initiation and growth in thin-walled structural elements ................ 3 7
Stadnyk M. M. An elastic ellipsoid heat-conductive inclusion in a body under effect
of heat flow at infinity ....................................................................................................... 3 16
Chernets M. V. and Zhydyk V. B. Quasi-static contact problem for cylindrical joints
with a small facing of bodies contours............................................................................... 3 24
Revenko V. P. Torsion of a finite cylinder by locally distributed friction forces......................... 3 30
Nekliudov I. M., Voyevodin V. M., Didenko S. Yu., Ilchenko M. I., Didenko Yu. S.,
and Ilchenko Yu. M. Nanostructured microlaminates copper-steel:
preparation and mechanical properties............................................................................... 3 36
Yaskiv O. I., Pohrelyuk I. M., Samborskyi O. V., and Fedirko V. M. Tribological pro-
perties of carbonitride coatings formed on titanium by thermodiffusion method .............. 3 40
Berthod P., Aranda L., and Hamini Y. Thermal expansion of chromium-rich iron-based
or iron/nickel-based alloys reinforced by tantalum carbides.............................................. 3 46
Duriagina Z. A., Kuzin O. A., Kuzin M. O., and Shcherbovskikh N. V. The influence of
the laser alloying conditions on the parameters of wear resistance of 12Х17Т steel ......... 3 53
Kurek M. and Łagoda T. Comparison of fatigue characteristics for some selected
structural materials under bending and torsion .................................................................. 3 59
Malyshev V. V. The electrodeposition of different types of cathodic deposits
of tungsten from ion melts ................................................................................................. 3 68
Bakar M., Okulska-Bożek M., and Zygmunt M. Effect of poly(amic acid) and polyimide
on the adhesive strength and fracture toughness of epoxy resin ........................................ 3 77
Snizhnoi G. V. Formation of deformation martensite in the chromium-nickel austenitic steels .. 3 84
Bondar E. S., Prihodko S. V., Kurmakova I. N., Gumenyuk O. L. The inhibiting action
of nitrogencontaining geterocycles under the mild steel corrosion.................................... 3 90
Nazarchuk Z. T., Skalskyi V. R., Serhiyenko O. M., Matviiv Yu. Ya., Hrechykhin L. I.,
and Podloznyi E. D. Evaluation of the displacement vector module
for simultaneous formation of cracks in composite material ............................................. 3 94
Teterko A. Ya. and Hutnyk V. I. Construction of inverse transformation function
of eddy current devices for a multivariable testing ............................................................ 3 103
Vorobel R. A., Zhuravel I. M., Svirska L. M., and Student O. Z. Automatic selection
and quantitative analysis of carbides on the 12Х1МФ steel grains interface
after operation at the HPP pipeline .................................................................................... 3 109
Hertsyk O. M., Kovbuz M. O., Yezerska O. A., and Pereverzieva T. G. Modification
of the soft magnetic amorphous alloys surface for creation of durable corrosion-
protection coatings............................................................................................................. 3 116
Ostash O. P. and Vytvytskyi V. I. Double action of hydrogen on the mechanical
behaviour of steels and structural optimization of their hydrogen-resistance. ................... 4 5
Balitskii O. I., Eliasz J., and Ripei I. V. The influence of preliminary plastic
deformation of 12Х18Н12Т steel on its mechanical characteristics .................................. 4 20
Nykyforchyn H. M., Tkachuk Yu. M., and Student O. Z. Operation degradation
of 20Х13 steel blades of HPP steam turbines .................................................................... 4 28
Ivanytskyi Ya. L., Shtayura S. T., Molkov Yu. V., and Lenkovskii T. M. Hydrogen
influence on fracture resistance of sheet steel 65Г............................................................. 4 36
Rozumek D. and Marciniak Z. Fatigue properties of notched specimens made
of FeP04 steel .................................................................................................................... 4 41
Jafarian H. R., Mirzamohammdi S., Sabour Rouhaghdam A., and Aliofkhazraei M.
Investigation on microstructure and oxidation behavior of Cr-modified aluminide
coating on γ-TiAl alloys .................................................................................................... 4 47
137
Savruk M. P. and Kazberuk A. Distribution of stresses around V-shaped notches
under complex-stressed state ............................................................................................. 4 52
Andreykiv O. Ye., Kit M. B., and Khyl S. V. The determination of residual life time
of a plate with cracks under block loading......................................................................... 4 62
Stashchuk M. H. Mutual influence of the stress-strain state and hydrogen
concentration in the system “metal–hydrogen” ................................................................. 4 71
Datsyshyn O. P. and Rudavska I. A. An edge nonradial crack in a circular disk......................... 4 78
Ostrik V. I. and Shchekotova O. M. Slipping contact of a punch with an elastic wedge ............. 4 82
Kulchytsky-Zhyhailo R. D. Two-layered periodic coated elastic half-space
under Hertz’s pressure ....................................................................................................... 4 92
Kondrat V. F. and Hrytsyna O. R. The equations of local gradient electro-magneto-thermo-
mechanics of dielectrics with account of the polarization inertia....................................... 4 99
Kurek M., Łagoda T., and Warmuzek P. Determination of stress and strain
concentrations in the elastic-plastic materials under bending and torsion.......................... 4 108
Chernets M. V. and Yarema R. Ya. A generalized method of the assessment of the correction
teeth effect on life time, wear and contact strength of cylindrical involute gears .............. 4 115
Slobodian B. S. Pressure of an elastic body on a rigid base with a groove,
partly filled with liquid not wetting its surface .................................................................. 4 122
Khoma M. S., Yurkevych R. M., Chumalo H. V., and Radkevych O. I. The influence
of welded joints defects of 17Г1СУ pipe steel on hydrogen sulfide stress
corrosion cracking resistance............................................................................................. 4 129
Pokluda J. Theoretical strength of solids: recent results and applications .................................. 5 5
Milman Yu. V., Nykyforchyn H. M., Hrinkevych. K. E., Tsyrulnyk O. T., Tkachenko I. V.,
Voloshyn V. A., and Mordel L. V. Assessment of the service degradation of a gas
pipeline steel by destructive and non-destructive methods ................................................ 5 13
Student O. Z. and Krechkovska H. V. Anisotropy of the mechanical properties
of 15Х1М1Ф degraded steel after its exploitation on HPP pipelines ................................ 5 19
Hembara O. V. and Andreikiv O. Ye. The influence of hydrogenation
of oil-and-gas pipeline walls on their soil corrosion and life ............................................. 5 27
Andreiko I. M., Kulyk V. V., and Ostash O. P. Corrosion fatigue fracture of steels
of railway wheels............................................................................................................... 5 35
Karpash O. M., Dotsenko Ye. R., and Karpash M. O. Complex method
of physical and mechanical properties evaluation of metalwork materials ........................ 5 40
Karuskevych M. V., Zhuravel I. M., and Maslak T. P. Use of fractal geometry
in the problems of the residual life prediction of aviation constructions............................ 5 48
Dudik M. V. and Dikhtiarenko Yu. V. Investigation of the initial period of rotation
of the interface crack at the angular point of the media interface. ..................................... 5 53
Ignatovich S. R. and Yutskevych S. S. The fatigue damage control of Al-clad D16AT
alloy by characteristics of surface deformation relief ........................................................ 5 60
Skoblо Т. S. and Vlasovets V. М. Characteristic properties of precipitation-hardening
60Х2Н4ГМФ steel structure formation............................................................................. 5 66
Savvakin D. G., Gumenyak M. M., Matvijchuk M. V., and Molyar O. G.
On the role of hydrogen in sintering of titanium powders ................................................. 5 72
Dzioba I. R. The influence of microstructure components on static crack growth
resistance of 13ХМФ steel ................................................................................................ 5 82
Pichuhin A. T., Yaskiv O. I., Lukianenko O. H., and Pohreliuk I. M. The influence
of the phase – structural state of the near-surface layers on mechanical
properties of ВТ1-0 titanium alloy .................................................................................... 5 90
Santos E. C., Kida K., Honda T., Koike H., and Rozwadowska J. Fatigue strength impro-
vement of AISI E52100 bearing steel by induction heating and repeated quenching ........ 5 96
Nyrkova L. I., Poliakov S. G., Osadchuk S. O., Melnychuk S. L., and Gapula N. O.
On the determination of atmospheric corrosion rate of metal constructions
using polarization resistance method ................................................................................. 5 101
Borts B. V. Formation of compounds of dissimilar metals in a solid phase
by the method of hot rolling in vacuum............................................................................. 5 106
Khoma M. S., Sysyn H. M., Radkevych O. I., and Golovchuk M. Ya. Electrochemical
properties of 17Г1СУ steel welded joints.......................................................................... 5 112
Kunets Ya. I., Matus V. V., and Hrylytsky M. D. Remote determination
of the mechanical parameters of thin plane inclusions with weak contrast........................ 5 118
Vasiliev A. G. The influence of hydrogen sorption on the kinetics of phase
disintegration of RFe2 intermetallides ............................................................................... 5 124
138
Savruk M. P., Kazberuk A., and Tarasiuk G. Stress distribution at the contour
of a rounded V-shaped notch under antiplane strain.......................................................... 6 7
Kryvyy O. F. A circular interface crack in the non-uniform transversal-isotropic space............. 6 15
Stashchuk M. H. The influence of external loading on hydrogen redistribution
in metal at stress concentrators .......................................................................................... 6 23
Popov V. G. Torsion oscillations of a finite elastic cylinder with an external
circumferential crack ......................................................................................................... 6 30
Mirsalimov V. M. and Vagari A. R. Partial crack closure in the perforated fuel cell................... 6 39
Toribio J., Matos J. C., González В., and Escuadra J. Environmentally-assisted fatigue
crack growth in prestressing steel wires............................................................................. 6 45
Havrysh V. I. and Kosach A. I. A boundary-value problem for a piece-wise layer
with foreign inclusions ...................................................................................................... 6 52
Yevtushenko O., Kutsei M., and Grzes P. Numerical and analytical solutions
of the heat problem of friction during braking................................................................... 6 59
Fedirko V. M., Pohreliuk I. M., and Samborskyi O. V. Regularities of thermo-diffusion
saturation of titanium alloys from amorphous boron in nitrogen....................................... 6 65
Markashova L. I., Pozniakov V. D., Gaivoronskyi O. A., Berdnikova O. M.,
and Aleksieienko T. O. Evaluation of strength and crack growth resistance
of railway wheels after long-term operation ...................................................................... 6 73
Arendar L. A., Vasyliv Kh. B., and Shyrokov V. V. The influence of loading
on the deformation of surface layer of steels with boron-chromium coating..................... 6 80
Pashechko M. I. and Mоntusevych Yu. Evaluation of wear resistance of Fe–Mn–C–B
eutectic coatings, alloyed with Si, Ni і Cr, using multicriterion analysis........................... 6 86
Levytskyi V. O., Babizhetskyi V. S., Miakush O. R., Kovalchuck I. V., Riabov O. B.,
and Kotur B. Ya. Phase equilibria in the Y–Hf–Fe system and hydrogenation
properties of alloys ............................................................................................................ 6 94
Ünal I., Zor S., and Atapek H. The influence of artificial saliva on NiTi orthodontic wires:
a study on surface characterization .................................................................................... 6 101
Wykpis K., Popczyk M., Niedbała J., Budniok A., and Łągiewka E. The influence
of current density of deposition on Zn–Ni coatings properties .......................................... 6 107
Nazarchuk Z. T., Kuryliak D. B., Voitko M. V., and Kulynych Ya. P. Diffraction of an elastic
SH-wave at the interface crack in a rigid junction of the layer and an interface ................ 6 115
Karpash M. O. and Koturbash T. T. Evaluation of acoustic oscillations energy losses
under ultrasonic testing in natural gas................................................................................ 6 122
SHORT REPORTS
Paustovskyi O. V., Novikova V. I., Timofieieva I. I., Moliar O. H., Hubin Yu. V.,
Mordovets N. M., Isaieva L. P., and Kostenko A. D. Spark treatment
of ВТ22 alloy by chromium and tungsten electrode materials.......................................... 1 109
Andreiko I. M. and Kulyk V. V. Temperature dependence of mechanical characteristics
of wheel steels ................................................................................................................... 1 113
Bagliuk G. A., Napara-Volgina S. G., Orlova L. M., and Kud V. K. The influence of the
working layer thickness on the properties of hot-pressed powder layered composites ...... 3 122
Mykhalyna G. M., Vrublevska T. Ya., Urys’ M. B., and Lutsyshyn Yu. Ya. Analytical
control of platinum group elements content in multicomponent systems .......................... 3 125
Mykhayliv N. P. Intensification of diffusive nickel plating of 5XHM steel ................................ 3 129
IN SCIENTIFIC CIRCLES
Rytsar D. I. Defence of dissertations........................................................................................... 1 116
Stashchuk M. H. Problems of brittle fracture mechanics............................................................. 1 118
Pichuhin A. T. Problems of materials science and surface engineering of metals ....................... 1 121
Veselivska H. H. Corrosion. Corrosion protection of metals....................................................... 1 124
Nykyforchyn H. M. Theoretical and experimental investigations in modern materials
science and engineering technologies ................................................................................ 3 131
Pakiela Z. and Nykyforchyn H. The 12th Polish-Ukrainian-German Summer School
on fracture mechanics and strength of materials ................................................................ 5 130
Dmytrakh I. M. and Student O. Z. The Ukrainian-Greek Symposium
on Fracture Mechanics of Materials and Strength of Structures ........................................ 6 129
JUBILEES
Volodymyr Panasyuk (to the 85th birthday) .............................................................................. 1 127
List of papers published in “Physicochemical Mechanics of Materials” in 2011 .................... 6 135
Authors’ index............................................................................................................................ 6 139
|
| id | nasplib_isofts_kiev_ua-123456789-138352 |
| institution | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| issn | 0430-6252 |
| language | English |
| last_indexed | 2025-12-07T15:47:11Z |
| publishDate | 2011 |
| publisher | Фізико-механічний інститут ім. Г.В. Карпенка НАН України |
| record_format | dspace |
| spelling | 2018-06-18T16:15:58Z 2018-06-18T16:15:58Z 2011 List of papers published in “Physicochemical Mechanics of Materials” in 2011 // Фізико-хімічна механіка матеріалів. — 2011. — Т. 47, № 6. — С. 135-138.назв. — англ. 0430-6252 https://nasplib.isofts.kiev.ua/handle/123456789/138352 en Фізико-механічний інститут ім. Г.В. Карпенка НАН України Фізико-хімічна механіка матеріалів У наукових колах List of papers published in “Physicochemical Mechanics of Materials” in 2011 Перечень статей, опубликованных в журнале “ФХММ” за 2011 г Перелік статей, опублікованих у журналі “ФХММ” за 2011 р Article published earlier |
| spellingShingle | List of papers published in “Physicochemical Mechanics of Materials” in 2011 У наукових колах |
| title | List of papers published in “Physicochemical Mechanics of Materials” in 2011 |
| title_alt | Перечень статей, опубликованных в журнале “ФХММ” за 2011 г Перелік статей, опублікованих у журналі “ФХММ” за 2011 р |
| title_full | List of papers published in “Physicochemical Mechanics of Materials” in 2011 |
| title_fullStr | List of papers published in “Physicochemical Mechanics of Materials” in 2011 |
| title_full_unstemmed | List of papers published in “Physicochemical Mechanics of Materials” in 2011 |
| title_short | List of papers published in “Physicochemical Mechanics of Materials” in 2011 |
| title_sort | list of papers published in “physicochemical mechanics of materials” in 2011 |
| topic | У наукових колах |
| topic_facet | У наукових колах |
| url | https://nasplib.isofts.kiev.ua/handle/123456789/138352 |