Method of low-cycle fatigue test results processing
There is considered the method of proceeding during elaboration of low-cycle fatigue test results of metals. Presented method enables to determine the material data in various periods of fatigue life. The results obtained with the use of proposed method allow taking into account during fatigue life...
Gespeichert in:
| Veröffentlicht in: | Фізико-хімічна механіка матеріалів |
|---|---|
| Datum: | 2012 |
| Hauptverfasser: | Mroziński, S., Lipski, A. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
2012
|
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/139186 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Method of low-cycle fatigue test results processing/ S. Mroziński, A. Lipski // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 1. — С. 79-82. — Бібліогр.: 5 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Method of low-cycle fatigue test results processing
von: S. Mroziński, et al.
Veröffentlicht: (2012)
von: S. Mroziński, et al.
Veröffentlicht: (2012)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014)
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014)
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)
von: Shukaev, S., et al.
Veröffentlicht: (2008)
Wear-fatigue test methods and their significance
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
von: Bahdanovich, A.V., et al.
Veröffentlicht: (2009)
Low-cycle fatigue calculation of gas turbine engine disks under flight cycle conditions
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
von: Karimbaev, K.D., et al.
Veröffentlicht: (2009)
Correlation of uniaxial cyclic torsion and tension-compression for low-cycle fatigue
von: T. Lagoda, et al.
Veröffentlicht: (2017)
von: T. Lagoda, et al.
Veröffentlicht: (2017)
Low-cycle fatigue of steels after ion nitriding in hydrogen-free environments
von: P. V. Kaplun, et al.
Veröffentlicht: (2016)
von: P. V. Kaplun, et al.
Veröffentlicht: (2016)
Investigation of the microstructure and properties of TRIP 800 steel subjected to low-cycle fatigue
von: Z. M. Rykavets, et al.
Veröffentlicht: (2019)
von: Z. M. Rykavets, et al.
Veröffentlicht: (2019)
Investigation of the microstructure and properties of TRIP 800 steel subjected to low-cycle fatigue
von: Rykavets, Z.M., et al.
Veröffentlicht: (2019)
von: Rykavets, Z.M., et al.
Veröffentlicht: (2019)
Contact fatigue in low-cycle loading of Wc-Co hard alloys for metal working
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
von: Fal'kovskii, V.A., et al.
Veröffentlicht: (1985)
Hydraulic testing of pipe sections with corrosion damage in the mode of low-cycle loading
von: P. S. Jukhimets, et al.
Veröffentlicht: (2013)
von: P. S. Jukhimets, et al.
Veröffentlicht: (2013)
Effect of Preliminary Torsional Strain on Low-Cycle Fatigue of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2019)
von: Hu, X.L., et al.
Veröffentlicht: (2019)
Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
von: Yu. M. Kobzar
Veröffentlicht: (2022)
von: Yu. M. Kobzar
Veröffentlicht: (2022)
Effect of Hydrogen, Hydride Orientation and Temperature on Low-Cycle Fatigue Resistance of Zr-1%Nb Fuel Rod Claddings
von: G. Riedkina, et al.
Veröffentlicht: (2021)
von: G. Riedkina, et al.
Veröffentlicht: (2021)
Low-cycle fatigue and cracking resistance of power plant boiler pipes and steam lines of 12Kh1MF steel
von: Zelenskii, V.G., et al.
Veröffentlicht: (1985)
von: Zelenskii, V.G., et al.
Veröffentlicht: (1985)
Low-frequency ultrasonic testing of process piping by guided waves
von: V. A. Troitskij, et al.
Veröffentlicht: (2016)
von: V. A. Troitskij, et al.
Veröffentlicht: (2016)
Recent developments to improve the quality and economics of testing for fatigue and fracture
von: Sunder, R.
Veröffentlicht: (2009)
von: Sunder, R.
Veröffentlicht: (2009)
Experimental Analysis of Behavior and Damage of Sandwich Composite Materials in Three-Point Bending. Part 2. Fatigue Test Results and Damage Mechanisms
von: Bezazi, A., et al.
Veröffentlicht: (2009)
von: Bezazi, A., et al.
Veröffentlicht: (2009)
Fatigue of low-carbon and low-alloys steels under conditions of Fretting
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)
von: G. V. Tsybanev, et al.
Veröffentlicht: (2009)
A new stress-based multiaxial high-cycle fatigue damage criterion
von: Xin Li, et al.
Veröffentlicht: (2018)
von: Xin Li, et al.
Veröffentlicht: (2018)
Cyclic Inelasticity and High-Cycle Fatigue of Metals with Consideration of the Stress Gradient Effect
von: Troshchenko, V.T.
Veröffentlicht: (2011)
von: Troshchenko, V.T.
Veröffentlicht: (2011)
Service loading test as a source for the fatigue curve parameters’ estimation
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
von: Gadolina, I.V., et al.
Veröffentlicht: (2009)
Effect of the chassis parts surface condition from high-strength titanium alloy VT-22 in the process of fatigue tests
von: A. O. Horpenko, et al.
Veröffentlicht: (2021)
von: A. O. Horpenko, et al.
Veröffentlicht: (2021)
Determination of fatigue process zone size by the method of phase-shear interferometry
von: O. P. Ostash, et al.
Veröffentlicht: (2010)
von: O. P. Ostash, et al.
Veröffentlicht: (2010)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
von: Hu, X.L., et al.
Veröffentlicht: (2017)
von: Hu, X.L., et al.
Veröffentlicht: (2017)
A method of statistical processing of the impedance testing method data
von: A. H. Protasov
Veröffentlicht: (2016)
von: A. H. Protasov
Veröffentlicht: (2016)
The change of the coercive force under fatigue testing of 40X steel specimens
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
von: K. V. Vakulenko, et al.
Veröffentlicht: (2015)
New design of closed loop servo hydraulic device for thermal fatigue testing
von: Zrilic, M., et al.
Veröffentlicht: (2009)
von: Zrilic, M., et al.
Veröffentlicht: (2009)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
The change of the coercive force under fatigue testing of 40X steel specimens
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
von: Вакуленко, К. В., et al.
Veröffentlicht: (2015)
Results of testing two implementations of r-algorithm
von: A. P. Likhovid, et al.
Veröffentlicht: (2018)
von: A. P. Likhovid, et al.
Veröffentlicht: (2018)
Influence of Nanoalumina Particles on the Static and High-Cycle Fatigue Properties of Peel-Loaded Adhesive-Bonded Joints
von: Kubita, A., et al.
Veröffentlicht: (2016)
von: Kubita, A., et al.
Veröffentlicht: (2016)
Simulation of processes of initiation and propagation of subcritical damage of metal in welded pipeline elements at low-cycle loading
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2016)
von: E. A. Velikoivanenko, et al.
Veröffentlicht: (2016)
Specifics of formation of electromagnetic field by a crack of fatigue origin at eddy current testing
von: Ja. Teterko, et al.
Veröffentlicht: (2016)
von: Ja. Teterko, et al.
Veröffentlicht: (2016)
Simulation of the Spindle Coupled Multi-Axial Loading Fatigue Test of a Rear Axle
von: Dong, Z., et al.
Veröffentlicht: (2017)
von: Dong, Z., et al.
Veröffentlicht: (2017)
Method of reference signals creating in non-destructive testing based on low-speed impact
von: V. S. Eremenko, et al.
Veröffentlicht: (2021)
von: V. S. Eremenko, et al.
Veröffentlicht: (2021)
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)
von: B. V. Uspenskyi, et al.
Veröffentlicht: (2022)
Multi-Cycle Fatigue of Composite Three-Layer Plates with Honeycomb Structure Made by Additive FDM Technologies
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
von: Успенський, Б. В., et al.
Veröffentlicht: (2022)
Ähnliche Einträge
-
Method of low-cycle fatigue test results processing
von: S. Mroziński, et al.
Veröffentlicht: (2012) -
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: V. M. Matsevityj, et al.
Veröffentlicht: (2014) -
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014) -
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
von: Мацевитый, В. М., et al.
Veröffentlicht: (2014) -
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
von: Shukaev, S., et al.
Veröffentlicht: (2008)