Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy

The 5083 aluminum alloy surfaces were coated with chromate conversion coatings. Then epoxy paints were applied on the chromate and non-chromate treatment surfaces. The adhesion, hardness and corrosion resistance of the coated samples were evaluated using adhesion tape test, pencil hardness test, sal...

Повний опис

Збережено в:
Бібліографічні деталі
Опубліковано в: :Фізико-хімічна механіка матеріалів
Дата:2012
Автори: Eshaghi Ameneh, Eshaghi Akbar
Формат: Стаття
Мова:English
Опубліковано: Фізико-механічний інститут ім. Г.В. Карпенка НАН України 2012
Онлайн доступ:https://nasplib.isofts.kiev.ua/handle/123456789/139353
Теги: Додати тег
Немає тегів, Будьте першим, хто поставить тег для цього запису!
Назва журналу:Digital Library of Periodicals of National Academy of Sciences of Ukraine
Цитувати:Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy / Eshaghi Ameneh, Eshaghi Akbar // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 2. — С. 47-50. — Бібліогр.: 10 назв. — англ.

Репозитарії

Digital Library of Periodicals of National Academy of Sciences of Ukraine
id nasplib_isofts_kiev_ua-123456789-139353
record_format dspace
spelling Eshaghi Ameneh
Eshaghi Akbar
2018-06-20T05:51:32Z
2018-06-20T05:51:32Z
2012
Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy / Eshaghi Ameneh, Eshaghi Akbar // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 2. — С. 47-50. — Бібліогр.: 10 назв. — англ.
0430-6252
https://nasplib.isofts.kiev.ua/handle/123456789/139353
The 5083 aluminum alloy surfaces were coated with chromate conversion coatings. Then epoxy paints were applied on the chromate and non-chromate treatment surfaces. The adhesion, hardness and corrosion resistance of the coated samples were evaluated using adhesion tape test, pencil hardness test, salt spray and electrochemical technique. The results indicated that the adhesion of the coating systems including chromate treatments was better than that of non-chromate conversion coatings, whereas the hardness of the coating systems was equal. Salt spray results showed that corrosion propagation from the scratched area in the painted samples with chromate treatment was lower than that of nonchromate coated surfaces. In addition, electrochemical corrosion measurements indicated that the coating system including chromate treatment presented lower corrosion current density, bigger polarization resistance and less negative corrosion potential than those of the non-chromate conversion coated surfaces.
Досліджено вплив хроматної конверсійної обробки алюмінієвого сплаву 5083 на адгезію епоксидних лакофарбових покривів та їх захисні властивості. Встановлено, що адгезія покривів по поверхні сплаву з хроматним конверсійним шаром більша, ніж за безхроматної обробки, а їх твердість в обох випадках однакова. Корозія металу під плівкою біля дефекту лакофарбового покриву за умов попереднього хроматування протікає не так інтенсивно, як після безхроматної обробки. Зразки сплаву зі системою покриву, яка охоплювала хроматну обробку, мали нижчі густини струму корозії, більший поляризаційний опір та менш негативний потенціал корозії, ніж безхроматно оброблені.
Исследовано влияние хроматной конверсионной обработки алюминиевого сплава 5083 на адгезию эпоксидных лакокрасочных покрытий и их защитные свойства. Установлено, что адгезия покрытий по поверхности сплава с хроматным конверсионным слоем больше, нежели после безхроматной обработки, а их твердость в обеих случаях одинакова. Коррозия металла под пленкой возле дефекта лакокрасочного покрытия после предварительного хромирования протекает не так интенсивно, как после безхроматной обработки. Образцы сплава с системой покрытия, которая охватывала хроматную обработку, имели меньшую плотность тока коррозии, большее поляризационное сопротивление и менее негативный потенциал коррозии, нежели безхроматно обработанные.
en
Фізико-механічний інститут ім. Г.В. Карпенка НАН України
Фізико-хімічна механіка матеріалів
Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
Влияние хроматных конверсионных покрытий на адгезию и коррозионную стойкость лакокрасочного покрытия на алюминиевом сплаве 508
Вплив хроматних конверсійних покривів на адгезію та корозійну тривкість лакофарбового покриву на алюмінієвому сплаві 5083
Article
published earlier
institution Digital Library of Periodicals of National Academy of Sciences of Ukraine
collection DSpace DC
title Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
spellingShingle Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
Eshaghi Ameneh
Eshaghi Akbar
title_short Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
title_full Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
title_fullStr Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
title_full_unstemmed Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
title_sort effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy
author Eshaghi Ameneh
Eshaghi Akbar
author_facet Eshaghi Ameneh
Eshaghi Akbar
publishDate 2012
language English
container_title Фізико-хімічна механіка матеріалів
publisher Фізико-механічний інститут ім. Г.В. Карпенка НАН України
format Article
title_alt Влияние хроматных конверсионных покрытий на адгезию и коррозионную стойкость лакокрасочного покрытия на алюминиевом сплаве 508
Вплив хроматних конверсійних покривів на адгезію та корозійну тривкість лакофарбового покриву на алюмінієвому сплаві 5083
description The 5083 aluminum alloy surfaces were coated with chromate conversion coatings. Then epoxy paints were applied on the chromate and non-chromate treatment surfaces. The adhesion, hardness and corrosion resistance of the coated samples were evaluated using adhesion tape test, pencil hardness test, salt spray and electrochemical technique. The results indicated that the adhesion of the coating systems including chromate treatments was better than that of non-chromate conversion coatings, whereas the hardness of the coating systems was equal. Salt spray results showed that corrosion propagation from the scratched area in the painted samples with chromate treatment was lower than that of nonchromate coated surfaces. In addition, electrochemical corrosion measurements indicated that the coating system including chromate treatment presented lower corrosion current density, bigger polarization resistance and less negative corrosion potential than those of the non-chromate conversion coated surfaces. Досліджено вплив хроматної конверсійної обробки алюмінієвого сплаву 5083 на адгезію епоксидних лакофарбових покривів та їх захисні властивості. Встановлено, що адгезія покривів по поверхні сплаву з хроматним конверсійним шаром більша, ніж за безхроматної обробки, а їх твердість в обох випадках однакова. Корозія металу під плівкою біля дефекту лакофарбового покриву за умов попереднього хроматування протікає не так інтенсивно, як після безхроматної обробки. Зразки сплаву зі системою покриву, яка охоплювала хроматну обробку, мали нижчі густини струму корозії, більший поляризаційний опір та менш негативний потенціал корозії, ніж безхроматно оброблені. Исследовано влияние хроматной конверсионной обработки алюминиевого сплава 5083 на адгезию эпоксидных лакокрасочных покрытий и их защитные свойства. Установлено, что адгезия покрытий по поверхности сплава с хроматным конверсионным слоем больше, нежели после безхроматной обработки, а их твердость в обеих случаях одинакова. Коррозия металла под пленкой возле дефекта лакокрасочного покрытия после предварительного хромирования протекает не так интенсивно, как после безхроматной обработки. Образцы сплава с системой покрытия, которая охватывала хроматную обработку, имели меньшую плотность тока коррозии, большее поляризационное сопротивление и менее негативный потенциал коррозии, нежели безхроматно обработанные.
issn 0430-6252
url https://nasplib.isofts.kiev.ua/handle/123456789/139353
citation_txt Effect of chromate conversion coatings on the adhesion and corrosion resistance of painted 5083 aluminum alloy / Eshaghi Ameneh, Eshaghi Akbar // Фізико-хімічна механіка матеріалів. — 2012. — Т. 48, № 2. — С. 47-50. — Бібліогр.: 10 назв. — англ.
work_keys_str_mv AT eshaghiameneh effectofchromateconversioncoatingsontheadhesionandcorrosionresistanceofpainted5083aluminumalloy
AT eshaghiakbar effectofchromateconversioncoatingsontheadhesionandcorrosionresistanceofpainted5083aluminumalloy
AT eshaghiameneh vliâniehromatnyhkonversionnyhpokrytiinaadgeziûikorrozionnuûstoikostʹlakokrasočnogopokrytiânaalûminievomsplave508
AT eshaghiakbar vliâniehromatnyhkonversionnyhpokrytiinaadgeziûikorrozionnuûstoikostʹlakokrasočnogopokrytiânaalûminievomsplave508
AT eshaghiameneh vplivhromatnihkonversíinihpokrivívnaadgezíûtakorozíinutrivkístʹlakofarbovogopokrivunaalûmíníêvomusplaví5083
AT eshaghiakbar vplivhromatnihkonversíinihpokrivívnaadgezíûtakorozíinutrivkístʹlakofarbovogopokrivunaalûmíníêvomusplaví5083
first_indexed 2025-12-07T17:06:09Z
last_indexed 2025-12-07T17:06:09Z
_version_ 1850869987394191360