Analysis of direct transformation from graphite to diamond crystal
The lattice parameters of cubic diamond and rhombohedral graphite under the probable direct transformation synthesis conditions have been obtained by means of linear expansion coefficient and elastic constant. Based on the empirical electron theory in solid and molecules, the valence electron struct...
Gespeichert in:
| Veröffentlicht in: | Сверхтвердые материалы |
|---|---|
| Datum: | 2016 |
| Hauptverfasser: | Tian, B., Xu, B., Xu, Y. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут надтвердих матеріалів ім. В.М. Бакуля НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/143839 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Analysis of direct transformation from graphite to diamond crystal / B. Tian, B. Xu, Y. Xu // Сверхтвердые материалы. — 2016. — № 3. — С. 3-10. — Бібліогр.: 26 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
Analysis of direct transformation from graphite to diamond crystal
von: B. Tian, et al.
Veröffentlicht: (2016)
von: B. Tian, et al.
Veröffentlicht: (2016)
Heat capacity of bulk boron doped single crystal HPHT diamonds in the temperature range from 2 to 400 K
von: Tarelkin, S., et al.
Veröffentlicht: (2016)
von: Tarelkin, S., et al.
Veröffentlicht: (2016)
Developments in synthesis, characterization, and application of large, high-quality CVD single crystal diamond
von: Liang, Q., et al.
Veröffentlicht: (2013)
von: Liang, Q., et al.
Veröffentlicht: (2013)
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
von: Kurio, A., et al.
Veröffentlicht: (2012)
von: Kurio, A., et al.
Veröffentlicht: (2012)
High-pressure behaviors of carbon nanotubes
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)
Thermal analysis of FeCoCu pre-alloyed powders used for diamond tools
von: Delong Xie, et al.
Veröffentlicht: (2018)
von: Delong Xie, et al.
Veröffentlicht: (2018)
High dosage thermoluminescence diamond dosimeters
von: Hernández-Ortiz, M., et al.
Veröffentlicht: (2012)
von: Hernández-Ortiz, M., et al.
Veröffentlicht: (2012)
Thermal stability of ultrahard polycrystalline diamond composite materials
von: Meng, D., et al.
Veröffentlicht: (2015)
von: Meng, D., et al.
Veröffentlicht: (2015)
A novel layer-structured PtN₂: first-principles calculations
von: Fan, C.Z., et al.
Veröffentlicht: (2013)
von: Fan, C.Z., et al.
Veröffentlicht: (2013)
Surface morphology and structural types of natural impact apographitic diamonds
von: Kvasnytsya, V., et al.
Veröffentlicht: (2016)
von: Kvasnytsya, V., et al.
Veröffentlicht: (2016)
Fabrication and wear performance of (Cu–Sn) solution/TiCx bonded diamond composites
von: Baoyan, L., et al.
Veröffentlicht: (2018)
von: Baoyan, L., et al.
Veröffentlicht: (2018)
Tribological performance of titanium alloy Ti–6Al–4V via CVD-diamond coatings
von: Din, S.H., et al.
Veröffentlicht: (2018)
von: Din, S.H., et al.
Veröffentlicht: (2018)
Nano periodic structure forma-tion in 4H–SiC crystal using femtosecond laser double-pulses
von: Kim, E., et al.
Veröffentlicht: (2018)
von: Kim, E., et al.
Veröffentlicht: (2018)
Electronic structures and mechanical properties of boron and boron-rich crystals (Part 2)
von: Shirai, K.
Veröffentlicht: (2010)
von: Shirai, K.
Veröffentlicht: (2010)
From superhard to hard: a review of transition metal dioxides TiO₂, ZrO₂, and HfO₂ hardness
von: Al-Khatatbeh, Y., et al.
Veröffentlicht: (2014)
von: Al-Khatatbeh, Y., et al.
Veröffentlicht: (2014)
Prediction of superhard carbon allotropes from the segment combination method
von: He, Ch., et al.
Veröffentlicht: (2012)
von: He, Ch., et al.
Veröffentlicht: (2012)
Hard and superhard carbon phases synthesised from fullerites under pressure
von: Brazhkin, V.V., et al.
Veröffentlicht: (2012)
von: Brazhkin, V.V., et al.
Veröffentlicht: (2012)
Novel sp³ forms of carbon predicted by evolutionary metadynamics and analysis of their synthesizability using transition path sampling
von: Boulfelfel, S.E., et al.
Veröffentlicht: (2012)
von: Boulfelfel, S.E., et al.
Veröffentlicht: (2012)
The influence of mechanochemical treatment of sintered submicrocrystalline corundum substrates on the structure of bioglass composites
von: Staniewicz-Brudnik, B., et al.
Veröffentlicht: (2008)
von: Staniewicz-Brudnik, B., et al.
Veröffentlicht: (2008)
Predicting new superhard phases
von: Li, Q., et al.
Veröffentlicht: (2010)
von: Li, Q., et al.
Veröffentlicht: (2010)
Facile and scalable synthesis of Ti₅Si₃ nanoparticles via solid-state route in an autoclave
von: Mao, W., et al.
Veröffentlicht: (2017)
von: Mao, W., et al.
Veröffentlicht: (2017)
Synthesis of orthorhombic chromium boride by solid state reaction
von: Mao, W., et al.
Veröffentlicht: (2016)
von: Mao, W., et al.
Veröffentlicht: (2016)
Влияние параметров осаждения нитридов высокоэнтро¬пийных сплавов (TiZrHfVNb)N на их структуру, состав, механические и трибологические свойства
von: Погребняк, А.Д., et al.
Veröffentlicht: (2013)
von: Погребняк, А.Д., et al.
Veröffentlicht: (2013)
Структурные особенности и физико-механические свойства аморфоподобных покрытий AlN–TiB₂–TiSi₂
von: Погребняк, А.Д., et al.
Veröffentlicht: (2015)
von: Погребняк, А.Д., et al.
Veröffentlicht: (2015)
Mechanical and tribological properties of V–C–N coatings as a function of applied bias voltage
von: Caicedo, J.C., et al.
Veröffentlicht: (2016)
von: Caicedo, J.C., et al.
Veröffentlicht: (2016)
Temperature and pressure investigation of HfxTa₁₋x C and ZrxNb₁₋x C carbide alloys
von: Bhardwaj, P., et al.
Veröffentlicht: (2016)
von: Bhardwaj, P., et al.
Veröffentlicht: (2016)
Composites of the cBN–Si₃N₄ system reinforced by SiCw for turning tools
von: Osipov, A.S., et al.
Veröffentlicht: (2016)
von: Osipov, A.S., et al.
Veröffentlicht: (2016)
Comparative investigation of NbN and Nb–Si–N films: experiment and theory
von: Ivashchenko, V.I., et al.
Veröffentlicht: (2014)
von: Ivashchenko, V.I., et al.
Veröffentlicht: (2014)
A potential superhard material m-BCN
von: Rui, S., et al.
Veröffentlicht: (2018)
von: Rui, S., et al.
Veröffentlicht: (2018)
Thermal resistance of PCD materials with borides bonding phase
von: Jaworska, L., et al.
Veröffentlicht: (2015)
von: Jaworska, L., et al.
Veröffentlicht: (2015)
Superhard pcBN tool materials with Ti₃SiC₂ MAX-phase binder: structure, properties, application
von: Kolabylina, T., et al.
Veröffentlicht: (2017)
von: Kolabylina, T., et al.
Veröffentlicht: (2017)
Possibility of the application of the computational intelligence in the production of superhard materials. Report 2
von: Tavares, L.O., et al.
Veröffentlicht: (2012)
von: Tavares, L.O., et al.
Veröffentlicht: (2012)
On the mathematical theory of microstructure evolution during final stage of liquid phase sintering
von: Golovchan, V.T.
Veröffentlicht: (2014)
von: Golovchan, V.T.
Veröffentlicht: (2014)
Thermoelastic equation of state of boron suboxide B₆O up to 6 GPa and 2700 K: simplified anderson-grüneisen model and thermodynamic consistency
von: Kurakevych, O.O., et al.
Veröffentlicht: (2014)
von: Kurakevych, O.O., et al.
Veröffentlicht: (2014)
Influence of Sn and Bi additions on the structures and wear properties of Cu–Sn–P–Ce cBN tools
von: Han, P., et al.
Veröffentlicht: (2018)
von: Han, P., et al.
Veröffentlicht: (2018)
Microscopic models of hardness
von: Gao, F.M., et al.
Veröffentlicht: (2010)
von: Gao, F.M., et al.
Veröffentlicht: (2010)
Towards the theory of hardness of materials
von: Oganov, A.R., et al.
Veröffentlicht: (2010)
von: Oganov, A.R., et al.
Veröffentlicht: (2010)
Sulfur-enhanced thermoluminescence of γ-radiated zirconia
von: Rubio, E., et al.
Veröffentlicht: (2015)
von: Rubio, E., et al.
Veröffentlicht: (2015)
Thermodynamics of the formation of composite material structures. A review
von: Lisovsky, A.F.
Veröffentlicht: (2015)
von: Lisovsky, A.F.
Veröffentlicht: (2015)
Metastable host–guest structure of carbon
von: Zhu, Q., et al.
Veröffentlicht: (2014)
von: Zhu, Q., et al.
Veröffentlicht: (2014)
Ähnliche Einträge
-
Analysis of direct transformation from graphite to diamond crystal
von: B. Tian, et al.
Veröffentlicht: (2016) -
Heat capacity of bulk boron doped single crystal HPHT diamonds in the temperature range from 2 to 400 K
von: Tarelkin, S., et al.
Veröffentlicht: (2016) -
Developments in synthesis, characterization, and application of large, high-quality CVD single crystal diamond
von: Liang, Q., et al.
Veröffentlicht: (2013) -
Wear resistance of nano-polycrystalline diamond with various hexagonal diamond contents
von: Kurio, A., et al.
Veröffentlicht: (2012) -
High-pressure behaviors of carbon nanotubes
von: Zhao, Z.S., et al.
Veröffentlicht: (2012)