Исследование влияния отжига в различных средах на свойства композиций TiN—TiB₂
Изучено влияние изотермического отжига в атмосфере азота и в вакууме на фазовый состав и износостойкость керамических композиций TiN—TiB₂ с содержанием борида 36 и 50% (мас.), полученных электроразрядным спеканием. После отжига в азоте повышается относительное количество TiN в системе в результате в...
Saved in:
| Published in: | Современные проблемы физического материаловедения |
|---|---|
| Date: | 2014 |
| Main Author: | Петухов, А.С. |
| Format: | Article |
| Language: | Russian |
| Published: |
Інститут проблем матеріалознавства ім. І.М. Францевича НАН України
2014
|
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/143881 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | Исследование влияния отжига в различных средах на свойства композиций TiN—TiB₂ / А.С. Петухов // Современные проблемы физического материаловедения: Сб. научн . тр. — К.: ІПМ НАН України, 2014. — Вип. 23. — С. 87-96. — Бібліогр.: 9 назв. — рос. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Влияние различных технологических условий на процессы реакционного электроразрядного спекания композиции TiN—TiB2
by: Петухов, А.С.
Published: (2009)
by: Петухов, А.С.
Published: (2009)
Перспективы разработки режущего материала на основе композиции TiB₂-TiN
by: Петухов, А.С., et al.
Published: (2012)
by: Петухов, А.С., et al.
Published: (2012)
Влияние различных видов бора на процессы синтеза композиции TiN—TiB₂ методом реакционного электроразрядного спекания
by: Петухов, А.С., et al.
Published: (2014)
by: Петухов, А.С., et al.
Published: (2014)
Development prospects of the cutting material on TiB2-TiN composition basis
by: A. S. Petukhov, et al.
Published: (2012)
by: A. S. Petukhov, et al.
Published: (2012)
Электроразрядное спекание тугоплавких композитов систем TiN–AlN и B₄C–TiB₂
by: Замула, М.В, et al.
Published: (2009)
by: Замула, М.В, et al.
Published: (2009)
Research of influence of the annealing in the different mediums on TiN—TiB2 compositions properties
by: A. S. Petukhov
Published: (2014)
by: A. S. Petukhov
Published: (2014)
Высокоэнергетический размол порошковых смесей TiH2 + BN и Ti + BN в различных средах
by: Петухов, А.С.
Published: (2009)
by: Петухов, А.С.
Published: (2009)
X-ray emission and photoelectron spectroscopy studies of interaction of nanocrystalline TiN and TiB₂ after highpressure sintering
by: Bykov, A.I., et al.
Published: (2007)
by: Bykov, A.I., et al.
Published: (2007)
TiB₂/GaAs and Au-TiB₂/GaAs structural transformations at short-term thermal treatment
by: Kryshtab, T.G., et al.
Published: (1999)
by: Kryshtab, T.G., et al.
Published: (1999)
Ионно-плазменное покрытие системы AlN-TiB₂-TiSi₂, получение и свойства
by: Азаренков, Н.А., et al.
Published: (2013)
by: Азаренков, Н.А., et al.
Published: (2013)
Influence of different types of the boron on the processes of TiN—TiB2 composition synthesis by the method of reactionary electric discharge sintering
by: A. S. Petukhov, et al.
Published: (2014)
by: A. S. Petukhov, et al.
Published: (2014)
Структурные особенности и физико-механические свойства аморфоподобных покрытий AlN–TiB₂–TiSi₂
by: Погребняк, А.Д., et al.
Published: (2015)
by: Погребняк, А.Д., et al.
Published: (2015)
Influence of crystallization rate on the microstrusture and properties of Ti–TiB alloy
by: D. O. Remizov, et al.
Published: (2020)
by: D. O. Remizov, et al.
Published: (2020)
Influence of TiV2-TiB2-(secondary) borids on stucture, properties and abrasive wear of hot-pressing cmc-composites B4C–(TiV2–TiN2)
by: O. N. Kajdash, et al.
Published: (2018)
by: O. N. Kajdash, et al.
Published: (2018)
Особенности барической предобработки и ее роль в формировании нанокомпозита TiN–TiB₂ при спекании в условиях высоких давлений
by: Быков, А.И., et al.
Published: (2010)
by: Быков, А.И., et al.
Published: (2010)
Mechanical properties of diamond–TiB2 composites
by: M. Szutkowska, et al.
Published: (2012)
by: M. Szutkowska, et al.
Published: (2012)
Mechanical properties of diamond–TiB2 composites
by: Szutkowska, M., et al.
Published: (2012)
by: Szutkowska, M., et al.
Published: (2012)
Исследование влияния ультрадисперсного порошка природного алмаза на свойства металломатричной композиции
by: Сафонова, М.Н., et al.
Published: (2018)
by: Сафонова, М.Н., et al.
Published: (2018)
Моделювання пористої і зеренної структур при двостадійному спіканні надтвердих PCBN систем cBN – Al, cBN – TiB2 (TiN) – Al
by: Коновал, С.М., et al.
Published: (2008)
by: Коновал, С.М., et al.
Published: (2008)
Uniformity of microstructure of Ti–TiB alloy produced under the conditions of electron beam remelting
by: P. I. Loboda, et al.
Published: (2019)
by: P. I. Loboda, et al.
Published: (2019)
Magnetron sputtering of high temperature composite ceramics AlN-TiB2-TiSi2
by: I. N. Torianik, et al.
Published: (2013)
by: I. N. Torianik, et al.
Published: (2013)
Формирование структуры и свойства композиционных покрытий TiB₂—TiC—сталь, полученных совмещением электродуговой наплавки и СВС
by: Луцак, Д.Л., et al.
Published: (2016)
by: Луцак, Д.Л., et al.
Published: (2016)
Структура и сопротивление внедрению гетерофазной керамики B₄C−CaB₆−TiB₂
by: Григорьев, О.Н., et al.
Published: (2012)
by: Григорьев, О.Н., et al.
Published: (2012)
Кинетика упорядочения в наноструктурных конденсатах квазибинарной системы W₂B₅—TiB₂
by: Шпак, А.П., et al.
Published: (2008)
by: Шпак, А.П., et al.
Published: (2008)
Структура та властивості ЕІЛ-покривів з TiN, TiB2 і Mo на титановому сплаві ВТ22 та їх трансформація за світлотермічної обробки
by: Паустовський, О.В., et al.
Published: (2009)
by: Паустовський, О.В., et al.
Published: (2009)
Влияние боридов TIВ₂-TIB₂-(вторичный) на стуктуру, свойства и абразивный износ горячепрессованных смс-композитов B4C–(TiВ₂–TiН₂)
by: Кайдаш, О.Н., et al.
Published: (2018)
by: Кайдаш, О.Н., et al.
Published: (2018)
Structural features and physico-mechanical properties of AlN–TiB2–TiSi2 amorphous-like coatings
by: A. D. Pogrebnjak, et al.
Published: (2015)
by: A. D. Pogrebnjak, et al.
Published: (2015)
Properties of composite vacuum-arc coatings of the TiN-Ti/TiON structure
by: Andreev, А., et al.
Published: (2018)
by: Andreev, А., et al.
Published: (2018)
Structure and properties of sputtered powder of the eutectic B4C – TiB2 alloy
by: P. I. Loboda, et al.
Published: (2015)
by: P. I. Loboda, et al.
Published: (2015)
Nanoniechanical Properties of TiN/TiC Multilayer Coatings
by: M. Azadi, et al.
Published: (2014)
by: M. Azadi, et al.
Published: (2014)
Nanoniechanical Properties of TiN/TiC Multilayer Coatings
by: Azadi, M., et al.
Published: (2014)
by: Azadi, M., et al.
Published: (2014)
Cavitation resistance of TiN coatings
by: A. D. Pogrebnjak, et al.
Published: (2011)
by: A. D. Pogrebnjak, et al.
Published: (2011)
Кавитационная стойкость покрытий TiN
by: Погребняк, А.Д., et al.
Published: (2011)
by: Погребняк, А.Д., et al.
Published: (2011)
Технология получения, структурообразование и некоторые свойства композиционной керамики системы W2B5–TiB2–B4C
by: Коротеев, А.В., et al.
Published: (2011)
by: Коротеев, А.В., et al.
Published: (2011)
Study of aeroabrasive wear of hot-pressed materials of the B4C–TiB2 system
by: V. V. Ivzhenko, et al.
Published: (2014)
by: V. V. Ivzhenko, et al.
Published: (2014)
Effect of 1. 9-MeV electron irradiation on characteristics of reactively-pressed TiB2-TiS ceramic composites
by: I. N. Totsky, et al.
Published: (2013)
by: I. N. Totsky, et al.
Published: (2013)
Hardness and adhesion strength of ion-plasma coatings of quasibinary systems of TiB2-VB2 and TiC-WC
by: O. V. Sobol, et al.
Published: (2015)
by: O. V. Sobol, et al.
Published: (2015)
Твердость и адгезионная прочность ионно-плазменных покрытий квазибинарных систем TiB₂-WB₂ и TiC-WC
by: Соболь, О.В., et al.
Published: (2015)
by: Соболь, О.В., et al.
Published: (2015)
Composition, structure and tribotechnical properties of TiN, MoN single-layer and TiN/MoN multilayer coatings
by: O. V. Bondar, et al.
Published: (2015)
by: O. V. Bondar, et al.
Published: (2015)
TiN crystal structure features in cBN—TiN—Al composite sintered at high pressures and temperatures
by: N. M. Biliavyna, et al.
Published: (2022)
by: N. M. Biliavyna, et al.
Published: (2022)
Similar Items
-
Влияние различных технологических условий на процессы реакционного электроразрядного спекания композиции TiN—TiB2
by: Петухов, А.С.
Published: (2009) -
Перспективы разработки режущего материала на основе композиции TiB₂-TiN
by: Петухов, А.С., et al.
Published: (2012) -
Влияние различных видов бора на процессы синтеза композиции TiN—TiB₂ методом реакционного электроразрядного спекания
by: Петухов, А.С., et al.
Published: (2014) -
Development prospects of the cutting material on TiB2-TiN composition basis
by: A. S. Petukhov, et al.
Published: (2012) -
Электроразрядное спекание тугоплавких композитов систем TiN–AlN и B₄C–TiB₂
by: Замула, М.В, et al.
Published: (2009)