Influence of manufacturing quality of laminated core on a turbogenerator exploitation term
The problem of calculating the flexural deformation of the laminated core of the stator turbogenerator is examined. The evaluation of the effect of gluing the core sheets on its bending stiffness based on the compliance of the insulating cover sheet of active
 steel. An impact of pressing ef...
Gespeichert in:
| Veröffentlicht in: | Електротехніка і електромеханіка |
|---|---|
| Datum: | 2016 |
| 1. Verfasser: | Shevchenko, V.V. |
| Format: | Artikel |
| Sprache: | Englisch |
| Veröffentlicht: |
Інститут технічних проблем магнетизму НАН України
2016
|
| Schlagworte: | |
| Online Zugang: | https://nasplib.isofts.kiev.ua/handle/123456789/147250 |
| Tags: |
Tag hinzufügen
Keine Tags, Fügen Sie den ersten Tag hinzu!
|
| Назва журналу: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Zitieren: | Influence of manufacturing quality of laminated core on a turbogenerator exploitation term / V.V. Shevchenko // Електротехніка і електромеханіка. — 2016. — № 4. — С. 28-33. — Бібліогр.: 8 назв. — англ.. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineÄhnliche Einträge
INFLUENCE OF MANUFACTURING QUALITY OF LAMINATED CORE ON A TURBOGENERATOR EXPLOITATION TERM
von: Shevchenko, V. V.
Veröffentlicht: (2016)
von: Shevchenko, V. V.
Veröffentlicht: (2016)
A problem of power supply of microprocessor-based protective relays at emergency mode
von: Gurevich, V.
Veröffentlicht: (2007)
von: Gurevich, V.
Veröffentlicht: (2007)
Imitation model of a high-speed induction motor with frequency control
von: Pliugin, V., et al.
Veröffentlicht: (2017)
von: Pliugin, V., et al.
Veröffentlicht: (2017)
Advanced research of the impact of rotor bars anisotropic conductivity on starting torque of an induction motor with a die-cast copper cage
von: Chuvashev, V.A., et al.
Veröffentlicht: (2006)
von: Chuvashev, V.A., et al.
Veröffentlicht: (2006)
Simple very high-speed overcurrent protection relay
von: Gurevich, V.
Veröffentlicht: (2007)
von: Gurevich, V.
Veröffentlicht: (2007)
High Current Pulse Transducer for Metal-Oxide Surge Arresters
von: Gurevich, V.
Veröffentlicht: (2007)
von: Gurevich, V.
Veröffentlicht: (2007)
Microprocessor protection relays: new prospects or new problems?
von: Gurevich, V.
Veröffentlicht: (2006)
von: Gurevich, V.
Veröffentlicht: (2006)
Nonconformance in Electromechanical Output Relays of Microprocessor-Based Protection Devices under Actual Operating Conditions
von: Gurevich, V.
Veröffentlicht: (2006)
von: Gurevich, V.
Veröffentlicht: (2006)
Stability of microprocessor relay protection and automation systems against intentional destructive electromagnetic impacts. Part 2
von: Gurevich, V.L.
Veröffentlicht: (2011)
von: Gurevich, V.L.
Veröffentlicht: (2011)
Electrolytic capacitors: design features and problems of the choice
von: Gurevich, V.I.
Veröffentlicht: (2012)
von: Gurevich, V.I.
Veröffentlicht: (2012)
Problem with output relays used in microprocessor-based protection devices: what to do?
von: Gurevich, V.I.
Veröffentlicht: (2007)
von: Gurevich, V.I.
Veröffentlicht: (2007)
Stability of microprocessor relay protection and automation systems against intentional destructive electromagnetic impacts. Part 1
von: Gurevich, V.L.
Veröffentlicht: (2011)
von: Gurevich, V.L.
Veröffentlicht: (2011)
Technological advance in relay protection: dangerous tendencies
von: Gurevich, V.I.
Veröffentlicht: (2012)
von: Gurevich, V.I.
Veröffentlicht: (2012)
Analysis of the special features of the thermal process in an induction generator at high saturation of the magnetic system
von: Chenchevoi, V., et al.
Veröffentlicht: (2017)
von: Chenchevoi, V., et al.
Veröffentlicht: (2017)
Implementing of Microsoft Azure machine learning technology for electric machines optimization
von: Pliuhin, V., et al.
Veröffentlicht: (2019)
von: Pliuhin, V., et al.
Veröffentlicht: (2019)
Определение магнитных индукций в магнитопроводах силовых трансформаторов при совместном использовании анизотропной и изотропной электротехнических сталей
von: Пентегов, И.В., et al.
Veröffentlicht: (2015)
von: Пентегов, И.В., et al.
Veröffentlicht: (2015)
Анализ конструкций шихтованных магнитопроводов силовых трехфазных трансформаторов
von: Levin, M.I., et al.
Veröffentlicht: (2014)
von: Levin, M.I., et al.
Veröffentlicht: (2014)
Новые подходы при построении магнитопроводов силовых трансформаторов
von: Levin, M.I., et al.
Veröffentlicht: (2015)
von: Levin, M.I., et al.
Veröffentlicht: (2015)
Application of the computing environment maple to the calculation of the dynamics of the electromagnets in the complicated systems of forced control
von: Baida, E.I., et al.
Veröffentlicht: (2019)
von: Baida, E.I., et al.
Veröffentlicht: (2019)
Численно-полевой анализ магнитного поля и электрических величин в статоре турбогенератора при автономной несимметричной нагрузке
von: Милых, В.И.
Veröffentlicht: (2016)
von: Милых, В.И.
Veröffentlicht: (2016)
Характеристики четырехфазного вентильного реактивного двигателя при питании от бесконденсаторного коммутатора
von: Финкельштейн, В.Б., et al.
Veröffentlicht: (2016)
von: Финкельштейн, В.Б., et al.
Veröffentlicht: (2016)
Математичне моделювання перехідних процесів у лінії Лехера в стані неробочого ходу
von: Чабан, А.В., et al.
Veröffentlicht: (2016)
von: Чабан, А.В., et al.
Veröffentlicht: (2016)
Сравнение эксплуатационных характеристик многофазных регулируемых асинхронных двигателей
von: Петрушин, В.С., et al.
Veröffentlicht: (2016)
von: Петрушин, В.С., et al.
Veröffentlicht: (2016)
Определение электромагнитных параметров и фазовых соотношений в турбогенераторах автоматизированным расчетом магнитного поля в программной среде FEMM
von: Милых, В.И., et al.
Veröffentlicht: (2016)
von: Милых, В.И., et al.
Veröffentlicht: (2016)
Механічні характеристики трифазних асинхронних двигунів при однофазному живленні
von: Маляр, В.С., et al.
Veröffentlicht: (2016)
von: Маляр, В.С., et al.
Veröffentlicht: (2016)
Исследование возможности применения интерфейсных реле в системах гибридной коммутации обмоток бистабильных актуаторов
von: Клименко, Б.В., et al.
Veröffentlicht: (2016)
von: Клименко, Б.В., et al.
Veröffentlicht: (2016)
Електромагнітні віброзбуджуючі сили при наявності ексцентриситету ротора турбогенератора
von: Васьковський, Ю.М., et al.
Veröffentlicht: (2016)
von: Васьковський, Ю.М., et al.
Veröffentlicht: (2016)
Исследование характера механического взаимодействия рабочих поверхностей сильноточных разрывных контактов
von: Волкова, О.Г., et al.
Veröffentlicht: (2016)
von: Волкова, О.Г., et al.
Veröffentlicht: (2016)
Машинно-трансформаторний агрегат для вітроенергетичних установок
von: Панченко, В.І., et al.
Veröffentlicht: (2016)
von: Панченко, В.І., et al.
Veröffentlicht: (2016)
Применение принципов объектно-ориентированного проектирования в разработке электрических машин
von: Заблодский, Н.Н., et al.
Veröffentlicht: (2016)
von: Заблодский, Н.Н., et al.
Veröffentlicht: (2016)
Проектный синтез турбогенератора на основе численно-полевых расчетов при варьировании числа пазов статора
von: Милых, В.И
Veröffentlicht: (2016)
von: Милых, В.И
Veröffentlicht: (2016)
Исследование динамических параметров электропривода на базе двигателя с катящимся ротором
von: Кулинченко, Г.В., et al.
Veröffentlicht: (2016)
von: Кулинченко, Г.В., et al.
Veröffentlicht: (2016)
Анализ теплового состояния тягового вентильного двигателя с постоянными магнитами для шахтного электровоза
von: Матющенко, А.В.
Veröffentlicht: (2016)
von: Матющенко, А.В.
Veröffentlicht: (2016)
Finite element technique for solution of thermo-contact problems and its application in numerical analysis of devices working with induction heating
von: Pantelyat, M.G., et al.
Veröffentlicht: (2016)
von: Pantelyat, M.G., et al.
Veröffentlicht: (2016)
Модель динамики влажности в системе "бумажная изоляция" – "трансформаторное масло" в нестационарных тепловых режимах силового трансформатора
von: Василевский, В.В.
Veröffentlicht: (2016)
von: Василевский, В.В.
Veröffentlicht: (2016)
Некоторые дефекты капсульных гидрогенераторов и их идентификация с помощью датчиков воздушного зазора
von: Поташник, С.И., et al.
Veröffentlicht: (2009)
von: Поташник, С.И., et al.
Veröffentlicht: (2009)
Анализ влияния ферромагнитных шунтов в рабочем зазоре на тяговые усилия в электромагните с однопозиционной магнитной защелкой
von: Выровец, С.В., et al.
Veröffentlicht: (2008)
von: Выровец, С.В., et al.
Veröffentlicht: (2008)
Рівняння несиметрії вузла живлення електромоторів при фазному короткому замиканні
von: Чабан, В.Й., et al.
Veröffentlicht: (2013)
von: Чабан, В.Й., et al.
Veröffentlicht: (2013)
Определение электромагнитных параметров электрических машин на основе численных расчетов магнитных полей
von: Милых, В.И., et al.
Veröffentlicht: (2006)
von: Милых, В.И., et al.
Veröffentlicht: (2006)
Электрические характеристики двухуровневого эквипотенциального заземлителя из одиночных горизонтальных электродов
von: Гуль, В.И., et al.
Veröffentlicht: (2006)
von: Гуль, В.И., et al.
Veröffentlicht: (2006)
Ähnliche Einträge
-
INFLUENCE OF MANUFACTURING QUALITY OF LAMINATED CORE ON A TURBOGENERATOR EXPLOITATION TERM
von: Shevchenko, V. V.
Veröffentlicht: (2016) -
A problem of power supply of microprocessor-based protective relays at emergency mode
von: Gurevich, V.
Veröffentlicht: (2007) -
Imitation model of a high-speed induction motor with frequency control
von: Pliugin, V., et al.
Veröffentlicht: (2017) -
Advanced research of the impact of rotor bars anisotropic conductivity on starting torque of an induction motor with a die-cast copper cage
von: Chuvashev, V.A., et al.
Veröffentlicht: (2006) -
Simple very high-speed overcurrent protection relay
von: Gurevich, V.
Veröffentlicht: (2007)