Buchumschlag

Study of properties of welded joint using Dantec’s Istra 4D systems

The paper presents displacement and strain fields measured at various stages of tension of flat samples in order to compare the effect of different technological parameters on mechanical properties of welded joints. Results of measurements are also compared with the results of tensile test of the ba...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Автоматическая сварка
Datum:	2017
Hauptverfasser:	Domanski, T., Piekarska, W., Kubiak, M.
Format:	Artikel
Sprache:	Russisch
Veröffentlicht:	Інститут електрозварювання ім. Є.О. Патона НАН України 2017
Schlagworte:	Научно-технический раздел
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/148959
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Study of properties of welded joint using Dantec’s Istra 4D systems / T. Domanski, W. Piekarska, M. Kubiak // Автоматическая сварка. — 2017. — № 12 (770). — С. 22-25. — Бібліогр.: 6 назв. — рос.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Study of properties of welded joint using dantec&#039;s ISTRA 40 systems
von: T. Domanski, et al.
Veröffentlicht: (2017)

Microstructure and Mechanical Properties of an Underwater Wet Welded Dissimilar Ferritic/Austenitic Steel Joint
von: Guo, N., et al.
Veröffentlicht: (2015)

Mechanical Properties of Dissimilar A356/SAPH440 Lap Joints by the Friction Stir Spot Welding and Self-Piercing Riveting
von: Bang, Han Sur, et al.
Veröffentlicht: (2018)

Mechanical Behavior of the Weld Joints of Thick Steel Plates Produced by Various Welding Processes
von: Bang, HanSur, et al.
Veröffentlicht: (2015)

A Ductile Tear Fracture Analysis of Lap Welded Joints
von: Imad, A., et al.
Veröffentlicht: (2004)

Fatigue life of welded joints according to energy criteria in the critical plane
von: Lagoda, T.
Veröffentlicht: (2006)

Nonlinearity of the Rock Joint Shear Strength
von: Wei, Y.F., et al.
Veröffentlicht: (2015)

Study of the Beltline Weld and Base Metal of WWER-440 First Generation Reactor Pressure Vessel
von: Schuhknecht, J., et al.
Veröffentlicht: (2010)

Mechanical Behavior and Failure of Riveting Joints in Tensile and Shear Tests
von: Mucha, J., et al.
Veröffentlicht: (2015)

Three-Dimensional Finite Element Analysis of Tensile-Shear Spot-Welded Joints in Tensile and Compressive Loading Conditions
von: Adib, H., et al.
Veröffentlicht: (2004)

Evaluation of Metal-Active Gas Double-Sided Double-Power Arc Welded Joints of High-Strength Low-Alloy Steel
von: Chen, Y.X., et al.
Veröffentlicht: (2015)

Quantification of the Influence of Residual Stresses on Fatigue Strength of Al-Alloy Welded Joints by Means of the Local Strain Energy Density Approach
von: Ferro, P., et al.
Veröffentlicht: (2016)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

Review: Progress in the Studies on Mechanical Properties of Materials
von: Tu, M.Y., et al.
Veröffentlicht: (2014)

An Experimental Study of the Dynamic Split Tension Properties of Reinforced Concrete
von: Zhao, Z., et al.
Veröffentlicht: (2016)

Mechanical Properties of GF/pCBT Composites and Their Fusion-Bonded Joints: Influence of Process Parameters
von: Zhang, L., et al.
Veröffentlicht: (2015)

Study of Dry and Wet Cement Mortar Dynamic Properties
von: Bragov, А., et al.
Veröffentlicht: (2002)

Investigation of Ultrasonic Assisted Friction Stir Spot Welding of Magnesium Alloy to Aluminum Alloy
von: Ji, S.D., et al.
Veröffentlicht: (2016)

The Ultimate Tensile Strength of Coach Peel Self-Piercing Riveting Joints
von: He, X., et al.
Veröffentlicht: (2013)

Shear Behavior of Non-Persistent Joint under High Normal Load
von: Sarfarazi, V., et al.
Veröffentlicht: (2017)

Effect of Tungsten-Inert-Gas Preheating on Mechanical and Microstructure Properties of Friction Stir Welded Dissimilar Al Alloy and Mild Steel
von: Bang, HanSur, et al.
Veröffentlicht: (2016)

3D Surface Profile Construction and Flaw Detection in a Composite Structure
von: Her, S.-C., et al.
Veröffentlicht: (2019)

Study on the Compression Moulding of Intercrossed Pre-Preg Glass FiberReinforced Plastic
von: Kim, J.W.
Veröffentlicht: (2016)

Study on the Failure Mechanism of the Polymorphic Mixture for Remanifactured Machinery Parts
von: Liu, C.H., et al.
Veröffentlicht: (2018)

FEM Analysis of Clinching Tool Load in a Joint of Dual-Phase Steels
von: Kaščák, L., et al.
Veröffentlicht: (2016)

Fracture and Fatigue Analysis for a Cracked Carabiner Using 3D Finite Element Simulations
von: Aliha, M.R.M., et al.
Veröffentlicht: (2015)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Experimental Testing
von: Rafi, M.M.
Veröffentlicht: (2018)

Study of Bond Properties of Steel Rebars with Recycled Aggregate Concrete. Analytical Modeling
von: Rafi, M.M.
Veröffentlicht: (2019)

Fatigue Life Prediction of Welded Box Structures
von: Zedira, H., et al.
Veröffentlicht: (2004)

Preparation, Modeling, and Optimization of Mechanical Properties of Epoxy/HIPS/Silica Hybrid Nanocomposite Using Combination of Central Composite Design and Genetic Algorithm. Part 1. Study of Damping and Tensile Strengths
von: Rostamiyan, Y., et al.
Veröffentlicht: (2013)

Analysis by Finite Element Method to Redesign a Jointed-Telescopic Crane for Elevation of Personnel
von: Diosdado-De la Peña, J.A., et al.
Veröffentlicht: (2017)

Experimental evaluation of pulse electric current effect on residual stresses in composite-to-copper joints
von: Stepanov, G.V., et al.
Veröffentlicht: (2008)

Effect of Grinding Conditions of a TC4 Titanium Alloy on Its Residual Surface Stresses
von: Li, J., et al.
Veröffentlicht: (2015)

Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis
von: Wang, Y.Q., et al.
Veröffentlicht: (2018)

Determining the Material and Physical Properties of Alloy La₀.₈₅Ce₀.₁₅Ni₅ Used in Hydrogen Storage
von: Jasminská, N., et al.
Veröffentlicht: (2017)

Friction and Wear Behavior of Wear-Resistant Belts in Drill Joints for Deep and Ultra-Deep Wells
von: Zhang, K., et al.
Veröffentlicht: (2018)

Evaluating Sensitivity of an AAR-Affected Concrete Arch Dam to the Effects of Structural Joints and Solar Radiation
von: Lamea, M., et al.
Veröffentlicht: (2015)

Study on Non-Linear Flexural Behavior of Reinforced Concrete Beams Using ANSYS by Discrete Reinforcement Modeling
von: Vasudevan, G., et al.
Veröffentlicht: (2013)

Numerical Modeling and Mechanical Analysis of Combined Connection with Bolts and Welds
von: Liu, M.S, et al.
Veröffentlicht: (2016)

Modeling and Analysis of the Tensile and Flexural Properties of a FiberOrientated Hybrid Nanocomposite Using Taguchi Methodology
von: Rostamiyan, Y.
Veröffentlicht: (2015)