Buchumschlag

Influence of increased sliding speed on the structure and properties of piston rings with ion-plasma coating

The technology of ion-plasma hardening of oil-scraper piston rings of D100 diesel engine by multilayer TiN/CrN composition is proposed. Comparative tests for friction and wear of the piston rings have been carried out and the multiple increasing in wear resistance of the rings with...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Вопросы атомной науки и техники
Datum:	2018
ISSN:	1562-6016
Hauptverfasser:	Skoblo, T.S., Sidashenko, A.I., Garkusha, I.E., Taran, A.V., Muratov, R.M., Maltsev, Т.V.
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	Національний науковий центр «Харківський фізико-технічний інститут» НАН України 2018
Schlagworte:	Низкотемпературная плазма и плазменные технологии
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/149072
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Influence of increased sliding speed on the structure and properties of piston rings with ion-plasma coating / T.S. Skoblo, A.I. Sidashenko, I.E. Garkusha, A.V. Taran, R.M. Muratov, Т.V. Maltsev // Вопросы атомной науки и техники. — 2018. — № 6. — С. 304-307. — Бібліогр.: 8 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

Study of degradation mechanism of metal-cutting tools and their hardening by ZrN PVD coatings
von: Skoblo, T.S., et al.
Veröffentlicht: (2018)

Increasing of mass transfer efficiency at magnetron deposition of metal coating
von: Chunadra, A.G., et al.
Veröffentlicht: (2015)

Deposition of chromium nitride coatings from vacuum arc plasma in increased nitrogen pressure
von: Ovcharenko, V.D., et al.
Veröffentlicht: (2014)

Application of HF discharge for nitriding of various surfaces
von: Gasilin, V.V., et al.
Veröffentlicht: (2010)

Development and application of metal contacts on polycrystalline diamond films using combination of HF and arc plasma sources
von: Muratov, R.M., et al.
Veröffentlicht: (2014)

Intrinsic stresses in DLC coatings deposited in modes of DC and pulse bias potentials
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2015)

Intrinsic stresses in multi-component nitride coatings produced by plasma immersion ion implantation
von: Kalinichenko, A.I., et al.
Veröffentlicht: (2017)

About influence of energy of electrons and ions on speed of electron- and ion-stimulated plasmachemical etching of silicon
von: Fedorovich, O.A., et al.
Veröffentlicht: (2010)

Features of coatings deposition in combined stationary-pulsed operation mode of the magnetron sputtering system
von: Chunadra, А.G., et al.
Veröffentlicht: (2017)

Structure of Fe-Cu coatings prepared by the magnetron sputtering method
von: Nowakowska-Langier, K., et al.
Veröffentlicht: (2010)

Modern methods of Ta₂O₅ coatings deposition for biomedical applications
von: Donkov, N., et al.
Veröffentlicht: (2009)

The influence of deposition technological process parameters on surface properties of multilayer coatings
von: Zykova, A., et al.
Veröffentlicht: (2009)

Plasma assisted deposition of TaB₂ coatings by magnetron sputtering system
von: Yakovin, S., et al.
Veröffentlicht: (2017)

Investigation of antimicrobial activity and morphological properties of metal coated textile surfaces
von: Necdet Aslan, et al.
Veröffentlicht: (2014)

Influence of plasma stream parameters in pulsed plasma gun on modification processes in exposed structural materials
von: Byrka, O.V., et al.
Veröffentlicht: (2011)

Nitriding, oxidation and carburization of titanium and steels in non-self maintained gaseous discharge
von: Timoshenko, A.I., et al.
Veröffentlicht: (2012)

Double magnetron cluster set-up for synthesis of micro and nano structure coatings
von: Yakovin, S., et al.
Veröffentlicht: (2015)

Effect of substrate bias voltage parameters on surface properties of ta-C coatings
von: Safonov, V., et al.
Veröffentlicht: (2017)

Investigation on surface, electrical and optical properties of ITO-Ag-ITO coated glass
von: Aslan, Aslan, et al.
Veröffentlicht: (2015)

Properties of DLC coatings deposited by DC and DC with superimposed pulsed vacuum arc
von: Zavaleyev, V., et al.
Veröffentlicht: (2014)

Mechanical and tribological characteristics of zirconium based ceramic coatings for micro-bearing application
von: Warcholinski, B., et al.
Veröffentlicht: (2014)

Erosion of vacuum-arc TiN coatings in plasma of stationary magnetron-type discharges
von: Glazunov, G.P., et al.
Veröffentlicht: (2011)

In vitro biocompatibility of amorphous carbon based coatings by varying of surface chemistry and nitrogen concentrations
von: Luk’yanchenko, V., et al.
Veröffentlicht: (2015)

The influence of irradiation by hydrogen plasma on the structure and phase compozition Ti-Zr-Ni alloys containing quasicrystalline phase
von: Bazdyreva, S.V., et al.
Veröffentlicht: (2012)

The corrosion properties of multilayer coatings deposited on stainless steel and Ti4Al6V substrates
von: Zykova, A., et al.
Veröffentlicht: (2009)

Tantalum pentoxide ceramic coatings deposition on Ti4AI6V substrates for biomedical applications
von: Donkov, N., et al.
Veröffentlicht: (2011)

Structure and properties of TiOx and TiNxOy coatings formed in vacuum ARC plasma fluxes
von: Belous, V.A., et al.
Veröffentlicht: (2018)

Modification of Ti-Zr-Ni alloys by powerful plasma stream of different gases
von: Bazdyrieva, S.V., et al.
Veröffentlicht: (2015)

Wearing features of oil scrapper piston rings with tin coating under bench tests for friction and wear
von: T. S. Skoblo, et al.
Veröffentlicht: (2017)

The effect of unintentional oxygen incorporation into Cr-CrN-DLC coatings deposited by MePIIID method using filtered cathodic vacuum arc carbon and metal plasma
von: Walkowicz, J., et al.
Veröffentlicht: (2010)

Treatment of polyimide films by an atmospheric pressure plasma of capacitive RF discharge for liquid crystal alignment
von: Bazhenov, V.Yu., et al.
Veröffentlicht: (2013)

Plasma parameters estimation in the non-self-sustained gas discharge with hollow anode
von: Misiruk, I.O., et al.
Veröffentlicht: (2018)

Modeling of gas diffusion into metals on the example of titanium nitriding in gas discharge plasmas
von: Misiruk, I.O., et al.
Veröffentlicht: (2015)

Devices for pre-sterilszation treatment of endoscopes by ozone and ultrasound
von: Taran, V.S., et al.
Veröffentlicht: (2014)

Ozonizer with superimposed discharge for inactivation of microorganisms
von: Taran, V.S., et al.
Veröffentlicht: (2011)

Automatic programmable air ozonizer
von: Gubarev, S.P., et al.
Veröffentlicht: (2015)

Several peaks of total current in Trichel pulse
von: Bolotov, O., et al.
Veröffentlicht: (2015)

Computer simulation of abnormal glow discharge processes in crossed electric and magnetic fields
von: Isakov, A.V., et al.
Veröffentlicht: (2014)

On relation between the autoemitter top field, anode voltage and cathode geometry
von: Stetsenko, B.V., et al.
Veröffentlicht: (2009)

Enrichment of colloidal solutions by nanoparticles in underwater spark discharge
von: Lopat’ko, K., et al.
Veröffentlicht: (2015)