A new stress-based multiaxial high-cycle fatigue damage criterion
A new stress-based high-cycle fatigue damage criterion for multiaxial load cases, D = αDσβDτγ is presented. This criterion is based on a critical plane approach that the damage parameter is a function of normal stress amplitude and shear stress amplitude on critical plane of maximum shear stress ran...
Saved in:
| Published in: | Functional Materials |
|---|---|
| Date: | 2018 |
| Main Authors: | Xin Li, Jianwei Yang, Dechen Yao |
| Format: | Article |
| Language: | English |
| Published: |
НТК «Інститут монокристалів» НАН України
2018
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/157131 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | A new stress-based multiaxial high-cycle fatigue damage criterion / Xin Li, Jianwei Yang, Dechen Yao // Functional Materials. — 2018. — Т. 25, № 2. — С. 406-411. — Бібліогр.: 18 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
by: Shukaev, S., et al.
Published: (2008)
by: Shukaev, S., et al.
Published: (2008)
Method for refractive index detection for emulsion concentration
by: Sihai Zhao, et al.
Published: (2018)
by: Sihai Zhao, et al.
Published: (2018)
Determination of cerium valent state in solution of CeO₂₋x nanoparticles
by: Gayduk, O.V.
Published: (2018)
by: Gayduk, O.V.
Published: (2018)
Physico-mathematical model for determining the direction in space to point sources of gamma radiation using spherical absorber
by: Grigoryev, A.N., et al.
Published: (2018)
by: Grigoryev, A.N., et al.
Published: (2018)
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2017)
by: Hu, X.L., et al.
Published: (2017)
Experimental and theoretical analysis of fatigue properties of liner for the large pressure equipment
by: Feng Xianzhang, et al.
Published: (2016)
by: Feng Xianzhang, et al.
Published: (2016)
Cyclic Inelasticity and High-Cycle Fatigue of Metals with Consideration of the Stress Gradient Effect
by: Troshchenko, V.T.
Published: (2011)
by: Troshchenko, V.T.
Published: (2011)
Research of the properties of renewable energy sources with battery electrode from new materials
by: Song Xueying, et al.
Published: (2017)
by: Song Xueying, et al.
Published: (2017)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
by: V. M. Matsevityj, et al.
Published: (2014)
by: V. M. Matsevityj, et al.
Published: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
by: Мацевитый, В. М., et al.
Published: (2014)
by: Мацевитый, В. М., et al.
Published: (2014)
On differences in mechanisms of metal fracture in conditions of low-cycle and high-cycle fatigue
by: Мацевитый, В. М., et al.
Published: (2014)
by: Мацевитый, В. М., et al.
Published: (2014)
XRD method for the determination of internal stresses in KDP crystals and their relationship to the anomalous biaxiality
by: Puzikov, V.M., et al.
Published: (2015)
by: Puzikov, V.M., et al.
Published: (2015)
Modeling the Process of Damage of Rods owing to Multi-cycle Fatigue in Conditions of Tension-Compression
by: Yu. M. Kobzar
Published: (2022)
by: Yu. M. Kobzar
Published: (2022)
High-stable standard samples of mass in the nano-gram range
by: Mikhailov, I.F., et al.
Published: (2013)
by: Mikhailov, I.F., et al.
Published: (2013)
New phoswich detector based on LFS and p-terphenyl scintillators coupled to micro pixel avalanche photodiode
by: Ahmadov, F., et al.
Published: (2017)
by: Ahmadov, F., et al.
Published: (2017)
New scintillators for fast and thermal neutron detection
by: Galunov, N.Z., et al.
Published: (2012)
by: Galunov, N.Z., et al.
Published: (2012)
The highly efficient gamma-neutron detector for control of fissionable radioactive materials
by: Ryzhikov, V.D., et al.
Published: (2014)
by: Ryzhikov, V.D., et al.
Published: (2014)
New materials for luminescent scanning near-field microscopy
by: Chornii, V., et al.
Published: (2013)
by: Chornii, V., et al.
Published: (2013)
Engineering of long length CsI:Tl scintillators for high energy physics
by: Zosim, D.I., et al.
Published: (2015)
by: Zosim, D.I., et al.
Published: (2015)
New method for estimating the grounding reliability test of aircraft cable shield
by: Hongxu Zhao, et al.
Published: (2017)
by: Hongxu Zhao, et al.
Published: (2017)
New approach to grain boundaries detection in polycrystalline materials by scratching of sample's surface
by: Badiyan, E.E., et al.
Published: (2011)
by: Badiyan, E.E., et al.
Published: (2011)
A review of high ideality factor in gallium nitride-based light-emitting diode
by: Hedzir, A.S., et al.
Published: (2021)
by: Hedzir, A.S., et al.
Published: (2021)
Light characteristics of high-power LED luminaire with a cooling system based on heat pipe
by: Nikolaenko, Yu.E., et al.
Published: (2019)
by: Nikolaenko, Yu.E., et al.
Published: (2019)
The looking for new possibilities of improvement of receiving-detecting circuit for digital radiographic systems with advanced spatial resolution
by: Ryzhikov, V.D., et al.
Published: (2011)
by: Ryzhikov, V.D., et al.
Published: (2011)
Crack initiation and endurance limit of hard steels under multiaxial cyclic loads
by: Bomas, H., et al.
Published: (2008)
by: Bomas, H., et al.
Published: (2008)
New material based on polyurethane doped with azobenzene dyes in recording media for dynamic polarization holography
by: Davidenko, N.A., et al.
Published: (2020)
by: Davidenko, N.A., et al.
Published: (2020)
Study on cutting performance and tool wear of micro-textured tool for milling Ti6Al4V
by: Shen Xiang-yu, et al.
Published: (2017)
by: Shen Xiang-yu, et al.
Published: (2017)
Optimization of the cooling system design for a compact high-power LED luminaire
by: Pekur, D.V., et al.
Published: (2020)
by: Pekur, D.V., et al.
Published: (2020)
Simulation and characterization of planar high-efficiency back contact silicon solar cells
by: Sachenko, A.V., et al.
Published: (2021)
by: Sachenko, A.V., et al.
Published: (2021)
Fatigue Damage Analysis of an Asphalt Mixture Based on Pseudostiffness
by: Wang, X.R., et al.
Published: (2018)
by: Wang, X.R., et al.
Published: (2018)
Generation of the current normal to the surface of the antenna by electromagnetic waves and its application in the highly responsive receiver
by: Dobrovolsky, V.N.
Published: (2021)
by: Dobrovolsky, V.N.
Published: (2021)
New thermal small-signal model for FP-HEMT used in satellite communication applications
by: Kourdi, Z., et al.
Published: (2021)
by: Kourdi, Z., et al.
Published: (2021)
Scintillation panels based on zinc selenide and oxide scintillators
by: Litichevskyi, V., et al.
Published: (2011)
by: Litichevskyi, V., et al.
Published: (2011)
Schottky diodes based on the zinc selenide semiconductor crystals
by: Voronkin, E.
Published: (2013)
by: Voronkin, E.
Published: (2013)
Resolving power of scintillation panels based on zinc selenide
by: Litichevskyi, V., et al.
Published: (2012)
by: Litichevskyi, V., et al.
Published: (2012)
Position-sensitive detector based on plastic scintillator for muon tomography
by: Ivanov, A.I., et al.
Published: (2015)
by: Ivanov, A.I., et al.
Published: (2015)
Luminescent temperature sensor based on [Ru(bpy)₃]²⁺ incorporated into chitosan
by: Tsvirko, M., et al.
Published: (2013)
by: Tsvirko, M., et al.
Published: (2013)
A liquid crystal-based sensitive element for optical sensors of cholesterol
by: Vistak, M.V., et al.
Published: (2017)
by: Vistak, M.V., et al.
Published: (2017)
Composite scintillation panels and elements based on fine-grained granules of crushed crystals
by: Litichevskyi, V.
Published: (2013)
by: Litichevskyi, V.
Published: (2013)
Calibrator of radioactive preparation doses for nuclear medicine based on CsI(Tl) crystals
by: Borodenko, Yu.A., et al.
Published: (2011)
by: Borodenko, Yu.A., et al.
Published: (2011)
Similar Items
-
Method for low-cycle fatigue life assessment of metallic materials under multiaxial loading
by: Shukaev, S., et al.
Published: (2008) -
Method for refractive index detection for emulsion concentration
by: Sihai Zhao, et al.
Published: (2018) -
Determination of cerium valent state in solution of CeO₂₋x nanoparticles
by: Gayduk, O.V.
Published: (2018) -
Physico-mathematical model for determining the direction in space to point sources of gamma radiation using spherical absorber
by: Grigoryev, A.N., et al.
Published: (2018) -
High-Cycle Fatigue Properties and Damage Mechanism of Q345B Structural Steel
by: Hu, X.L., et al.
Published: (2017)