Buchumschlag

Optimization of preparation process and performance analysis of fly ash foam glass

Foam glass was prepared with fly ash and glass powder as main raw materials, sodium carbonate as foaming agent, and trisodium phosphate as suds-stabilizing agent. The influence of the amount of fly ash and sodium carbonate, foaming temperature and foaming time on the compressive strength, flexural s...

Ausführliche Beschreibung

Gespeichert in:

Bibliographische Detailangaben
Veröffentlicht in:	Functional Materials
Datum:	2018
Hauptverfasser:	Zipeng Qin, Gang Li, Yan Tian, Yuwei Ma, Pengfei Shen
Format:	Artikel
Sprache:	Englisch
Veröffentlicht:	НТК «Інститут монокристалів» НАН України 2018
Schlagworte:	Characterization and properties
Online Zugang:	https://nasplib.isofts.kiev.ua/handle/123456789/157178
Tags:	Tag hinzufügen Keine Tags, Fügen Sie den ersten Tag hinzu!
Назва журналу:	Digital Library of Periodicals of National Academy of Sciences of Ukraine
Zitieren:	Optimization of preparation process and performance analysis of fly ash foam glass / Zipeng Qin, Gang Li, Yan Tian, Yuwei Ma, Pengfei Shen // Functional Materials. — 2018. — Т. 25, № 3. — С. 554-563. — Бібліогр.: 25 назв. — англ.

Institution

Digital Library of Periodicals of National Academy of Sciences of Ukraine

Ähnliche Einträge

The mechanical performance of glass fibre reinforced composite based sandwich structure
von: Xiaoli Zhu
Veröffentlicht: (2018)

Optical properties of alkali and alkaline earth tetraborate glasses prepared in the alumina crucible
von: Adamiv, V.T., et al.
Veröffentlicht: (2011)

Optical properties of alkali and alkaline earth tetraborate glasses prepared in the alumina crucible
von: Adamiv, V.T., et al.
Veröffentlicht: (2010)

Obtaining urea-formaldehyde foam materials with improved mechanical properties
von: Rymar, T.E., et al.
Veröffentlicht: (2017)

Structural and optical study of ZnS thin films prepared by radio frequency magnetron sputtering at different substrate temperatures
von: Le Kong, et al.
Veröffentlicht: (2017)

Thermal properties of alkaline and alkaline-earth borate glasses
von: Adamiv, V.T., et al.
Veröffentlicht: (2013)

Investigation of effect of viscosity on crystallization ability of spodumene glass-ceramic materials
von: Savvova, O., et al.
Veröffentlicht: (2016)

Effect of the Ba/Sr ratio on the optical properties of phosphate laser glass
von: Popov, A.S., et al.
Veröffentlicht: (2016)

Effect of nucleation mechanism on the structure of polyfunctional calcium phosphate glass materials
von: Savvova, O.V., et al.
Veröffentlicht: (2014)

Effects of matrix composition and Eu³⁺ concentration on luminescence properties of phosphate glass
von: Polisadova, E.F., et al.
Veröffentlicht: (2013)

Experimental study on tribological property of mechanical seals with changeable pore diameter
von: Ma Chenbo, et al.
Veröffentlicht: (2016)

Peculiarities of Ag metallic nanoparticles formation in alkaline and alkaline-earth tetraborate glasses
von: Dutka, R.M., et al.
Veröffentlicht: (2015)

The experimental research on axial compression performance of concrete-filled steel square tube strengthened by internal transverse stiffened bars
von: Nan Li, et al.
Veröffentlicht: (2017)

Research of formation of apatite-like layer on the surface of glass-ceramic coatings for dental implants
von: Savvova, O.V., et al.
Veröffentlicht: (2018)

Crystalline and thermal properties in miscible blends of PEEK, PPS and PEI obtained by melt compounding
von: Chen Jian-bing, et al.
Veröffentlicht: (2016)

Effect of fluorine addition on the structure and properties of high-porous glass ceramics applicable for reconstructive surgery
von: Sych, O., et al.
Veröffentlicht: (2017)

Structure and fluorescence of ZnWO₄ films prepared by ion beam sputtering
von: Dubovik, A., et al.
Veröffentlicht: (2012)

Annealing temperature modes influence on properties of heterophase nanocomposites based on ceramics "glass - Ag-Pd" systems
von: Lepikh, Ya.I., et al.
Veröffentlicht: (2014)

Low-temperature elastic properties of Zr₅₅Al₁₀Ni₅Cu₃₀ bulk metallic glass doped with yttrium
von: Bakai, S.A., et al.
Veröffentlicht: (2015)

Fabrication and mechanical performance of 3D woven basalt fiber composite materials
von: Lihua Lv, et al.
Veröffentlicht: (2017)

Surface modification of calcium carbonate nanoparticles as hydraulic oil additives friction performance research
von: Yuan-sheng Ding, et al.
Veröffentlicht: (2018)

Mechanical properties and energy dissipation of rock under acid corrosion and coupled static-dynamic loads
von: Liu Yong-sheng, et al.
Veröffentlicht: (2017)

Preparation of zinc oxide nanopowders doped with manganese, which have ferromagnetic properties at room temperature
von: Vorovsky, V.Yu., et al.
Veröffentlicht: (2018)

Thermally stable antireflection coatings for active elements of ZnMgSe:Cr²⁺-laser: preparation and properties
von: Khristyan, V.A., et al.
Veröffentlicht: (2011)

Influence of various preparation methods on percolation behavior of systems based on cross-linked polyurethanes and carbon nanotubes
von: Lysenkov, E.A., et al.
Veröffentlicht: (2018)

The solubility region of Ga in PbTe films prepared on Si-substrates by modified "hot wall" technique
von: Samoylov, A.M., et al.
Veröffentlicht: (2011)

Electrical properties and mechanisms of the point defect formation in PbTe(In) films prepared by modified "hot wall" technique
von: Samoylov, A.M., et al.
Veröffentlicht: (2011)

Energy state and micromechanical properties of PbO-ZnO-B₂O₃ glass-ceramic functional coatings on AISI420 stainless steel substrate
von: Duriagina, Z., et al.
Veröffentlicht: (2017)

A study of effect of injection molding process parameters on the impact performance of plastic product fabricated by fine fillers filled LDPE
von: Hua Cai, et al.
Veröffentlicht: (2016)

Effects of different concentrations of sodium ions on the self-assembly of amphotericin B and DPPC at the air-water interface
von: Juan Wang, et al.
Veröffentlicht: (2018)

The Use of Fly Ash as a Sorbent for Flue Gas Desulphurisation in Wet Ash Collector
von: I. A. Volchin, et al.
Veröffentlicht: (2013)

On the determination of the efficiency of catching fly-ash particles by drops
von: Dubrovskyi V.V., et al.
Veröffentlicht: (2011)

High-efficient microwave-assisted method for the preparation of foamed liquid glass granules
von: Rimar, T.E., et al.
Veröffentlicht: (2016)

Determination of the optimal conditions of the process of electrostatic gas cleaning from fly ash
von: Yatsenko V.P.
Veröffentlicht: (2012)

Degradation of lignin in cassava residue with Phanerochaete chrysosporium by solid state cultivation
von: Bin Xu, et al.
Veröffentlicht: (2016)

Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
von: Ved', M.V., et al.
Veröffentlicht: (2016)

Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
von: Ved', M.V., et al.
Veröffentlicht: (2016)

New sealing material for drainage operations
von: H Li, et al.
Veröffentlicht: (2018)

Mixed ZnSxSe₁-x crystals for digital radiography detectors
von: Trubaieva, O.G., et al.
Veröffentlicht: (2018)

Aging-effect in optimal doped Yba₂Cu₃O₇₋δ single crystals
von: Nazyrov, Z.F., et al.
Veröffentlicht: (2014)