The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
Properties of the new material obtained by hot isostatic pressing with the addition of certain concentrations of cobalt and nickel to the bronze alloy CuSn (85/15). The influence of Co and Ni elements on the wear resistance of the obtained elements was studied. It is shown that when the sintering te...
Saved in:
| Published in: | Functional Materials |
|---|---|
| Date: | 2018 |
| ISSN: | 1027-5495 |
| Main Authors: | Tulay Yildiz, Suleyman Aba |
| Format: | Article |
| Language: | English |
| Published: |
НТК «Інститут монокристалів» НАН України
2018
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/157181 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method / Tulay Yildiz, Suleyman Aba // Functional Materials. — 2018. — Т. 25, № 3. — С. 477-485. — Бібліогр.: 25 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tülay Yıldız, et al.
Published: (2019)
by: Tülay Yıldız, et al.
Published: (2019)
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Y. Tьlay, et al.
Published: (2019)
by: Y. Tьlay, et al.
Published: (2019)
Hot isostatic pressing of potassium-magnesium-phosphate materials for cesium immobilization
by: Sayenko, S.Y., et al.
Published: (2018)
by: Sayenko, S.Y., et al.
Published: (2018)
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
by: Gevorkyan, E., et al.
Published: (2017)
by: Gevorkyan, E., et al.
Published: (2017)
Phase formation in the SiC-Al₂O₃-ZrO₂ system during hot pressing by the method of electroconsolidation
by: Vovk, R.V., et al.
Published: (2019)
by: Vovk, R.V., et al.
Published: (2019)
The influence of hot isostatic pressing on the structure and mechanical properties of nickel heatproof alloys
by: O. S. Serhiienko, et al.
Published: (2011)
by: O. S. Serhiienko, et al.
Published: (2011)
Effect of deformation and crystal size of mechanically alloyed and tempered composite tungsten powders with titanium additives on the sintering process
by: Jahangiri, H., et al.
Published: (2018)
by: Jahangiri, H., et al.
Published: (2018)
Crystal structure and electrical resistance of Ni-W alloys
by: Derevyanko, V.V., et al.
Published: (2018)
by: Derevyanko, V.V., et al.
Published: (2018)
Modification of sintered iron properties by Y₂O₃ nanoparticles
by: Cherednyk, M.I., et al.
Published: (2016)
by: Cherednyk, M.I., et al.
Published: (2016)
Microstructure and wear properties of Ni–Ni3Si composites prepared by mechanical alloying and hot pressing sintering
by: J. Zhang, et al.
Published: (2020)
by: J. Zhang, et al.
Published: (2020)
Radiation resistance of Ti—20Zr alloy in microcrystalline and nanocrystalline state
by: Belous, V.A., et al.
Published: (2013)
by: Belous, V.A., et al.
Published: (2013)
Nanocrystalline alloys with high magnetic properties and high temperature stability
by: Noskova, N.I., et al.
Published: (2010)
by: Noskova, N.I., et al.
Published: (2010)
Effect of low-temperature annealings on mechanical properties and evolution of nanostructured alloy Zr1Nb
by: Sokolenko, V.I., et al.
Published: (2017)
by: Sokolenko, V.I., et al.
Published: (2017)
Potential producers of biogenic magnetic nanoparticles among disease-producing microorganisms of the brain
by: Gorobets, S.V., et al.
Published: (2017)
by: Gorobets, S.V., et al.
Published: (2017)
Process and property of hot-rolled stainless steel/carbon steel cladding bar
by: Zhining Jia, et al.
Published: (2016)
by: Zhining Jia, et al.
Published: (2016)
Effect of deformation by equal-channel multiangle pressing on functional properties of NbTi-based superconductor
by: Beloshenko, V.A., et al.
Published: (2009)
by: Beloshenko, V.A., et al.
Published: (2009)
The solubility region of Ga in PbTe films prepared on Si-substrates by modified "hot wall" technique
by: Samoylov, A.M., et al.
Published: (2011)
by: Samoylov, A.M., et al.
Published: (2011)
Narrowing of the martensite transformation temperature hysteresis in ferromagnetic Fe-Co-Ni-Ti alloys doped with Cu
by: Kokorin, V.V., et al.
Published: (2008)
by: Kokorin, V.V., et al.
Published: (2008)
Electrical properties and mechanisms of the point defect formation in PbTe(In) films prepared by modified "hot wall" technique
by: Samoylov, A.M., et al.
Published: (2011)
by: Samoylov, A.M., et al.
Published: (2011)
Thermoelectric properties of cold pressed samples of semiconductor (Bi₁₋xSbx)₂Te₃ solid solutions
by: Martynova, K.V., et al.
Published: (2018)
by: Martynova, K.V., et al.
Published: (2018)
Crystallization and natural aging of thin films produced by pulsed laser evaporation of rhenium
by: Bagmut, A.G., et al.
Published: (2013)
by: Bagmut, A.G., et al.
Published: (2013)
Strain induced effects in p-type silicon whiskers at low temperatures
by: Druzhinin, A.A., et al.
Published: (2012)
by: Druzhinin, A.A., et al.
Published: (2012)
Study of radiation-resistant gel bases for composite detectors
by: Boyarintsev, A.Yu., et al.
Published: (2013)
by: Boyarintsev, A.Yu., et al.
Published: (2013)
Effect of silver on thermal e.m.f and electric resistance of La-Sr-Co-O ceramics
by: Kozlovskii, A.A., et al.
Published: (2008)
by: Kozlovskii, A.A., et al.
Published: (2008)
The mechanical characteristic of rock salt under uniaxial compression with low temperature effect
by: Jie Chen, et al.
Published: (2016)
by: Jie Chen, et al.
Published: (2016)
Effect of substrate temperature on structural and substructural properties of MgO thin films
by: Diachenko, O.V., et al.
Published: (2015)
by: Diachenko, O.V., et al.
Published: (2015)
Low temperature characteristics of germanium whiskers
by: Druzhinin, A.A., et al.
Published: (2014)
by: Druzhinin, A.A., et al.
Published: (2014)
Effect of Y addition on the microstructures and mechanical properties of Mg-Gd-Y-Sm-Zr alloys
by: Fu sanling, et al.
Published: (2017)
by: Fu sanling, et al.
Published: (2017)
Effect of ultrasonic impact treatment on creep characteristics and evolution of Zr1Nb alloy nanostructure
by: Sokolenko, V.I., et al.
Published: (2018)
by: Sokolenko, V.I., et al.
Published: (2018)
The effect of microstructure and the related bio-corrosion behavior Mg alloy in SBF artificial body fluid
by: Hou Jianbao, et al.
Published: (2016)
by: Hou Jianbao, et al.
Published: (2016)
Fractal dimension of the breast cancer cells resistant and sensitive to doxorubicin activity
by: Medviediev, O., et al.
Published: (2016)
by: Medviediev, O., et al.
Published: (2016)
Temperature and composition effects on elastic properties of CdZnSb solid solution single crystals
by: Balazyuk, V.N., et al.
Published: (2008)
by: Balazyuk, V.N., et al.
Published: (2008)
The correlation between film structure and surface temperature
by: Shaginyan, L.R., et al.
Published: (2009)
by: Shaginyan, L.R., et al.
Published: (2009)
Low-temperature anomalies of the hardened tin conductivity
by: Voyevodin, V.N., et al.
Published: (2015)
by: Voyevodin, V.N., et al.
Published: (2015)
Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
by: Ved', M.V., et al.
Published: (2016)
by: Ved', M.V., et al.
Published: (2016)
Structural features of iron vacuum condensates alloyed with tungsten
by: Barmin, A.E., et al.
Published: (2012)
by: Barmin, A.E., et al.
Published: (2012)
Catalytic properties of binary and ternary alloys based on silver
by: Ved, M., et al.
Published: (2013)
by: Ved, M., et al.
Published: (2013)
Functional properties of electrolytic alloys of Cobalt with Molybdenum and Zirconium
by: Ved', M.V., et al.
Published: (2016)
by: Ved', M.V., et al.
Published: (2016)
Thermal and crack resistance of ceramics based on the MAX phase Ti₃AlC₂
by: Boyko, Yu.I., et al.
Published: (2018)
by: Boyko, Yu.I., et al.
Published: (2018)
Temperature dependence of the surface plasmon resonance in silver nanoparticles
by: Yeshchenko, O.A., et al.
Published: (2013)
by: Yeshchenko, O.A., et al.
Published: (2013)
Similar Items
-
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Tülay Yıldız, et al.
Published: (2019) -
The effect of sintering temperature on wear resistance of alloys produced by using hot isostatic pressing method
by: Y. Tьlay, et al.
Published: (2019) -
Hot isostatic pressing of potassium-magnesium-phosphate materials for cesium immobilization
by: Sayenko, S.Y., et al.
Published: (2018) -
Peculiarities of obtaining diamond-(Fe-Cu-Ni-Sn) composite materials by hot pressing
by: Gevorkyan, E., et al.
Published: (2017) -
Phase formation in the SiC-Al₂O₃-ZrO₂ system during hot pressing by the method of electroconsolidation
by: Vovk, R.V., et al.
Published: (2019)