The mechanical performance of glass fibre reinforced composite based sandwich structure
In this study, a sandwich structure of composite material based on glass fiber was proposed. Its bending properties were investigated, the strength and thermal properties of the sandwich structure and the materials of its components were tested. The results showed that the maximum bending load of th...
Saved in:
| Published in: | Functional Materials |
|---|---|
| Date: | 2018 |
| Main Author: | Xiaoli Zhu |
| Format: | Article |
| Language: | English |
| Published: |
НТК «Інститут монокристалів» НАН України
2018
|
| Subjects: | |
| Online Access: | https://nasplib.isofts.kiev.ua/handle/123456789/157430 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Journal Title: | Digital Library of Periodicals of National Academy of Sciences of Ukraine |
| Cite this: | The mechanical performance of glass fibre reinforced composite based sandwich structure / Xiaoli Zhu // Functional Materials. — 2018. — Т. 25, № 4. — С. 702-707. — Бібліогр.: 15 назв. — англ. |
Institution
Digital Library of Periodicals of National Academy of Sciences of UkraineSimilar Items
Mechanical and fatigue properties of CFRP plate reinforced steel structural interface
by: Hua Zhu
Published: (2018)
by: Hua Zhu
Published: (2018)
Optimization of preparation process and performance analysis of fly ash foam glass
by: Zipeng Qin, et al.
Published: (2018)
by: Zipeng Qin, et al.
Published: (2018)
Effect of nucleation mechanism on the structure of polyfunctional calcium phosphate glass materials
by: Savvova, O.V., et al.
Published: (2014)
by: Savvova, O.V., et al.
Published: (2014)
Fabrication and mechanical performance of 3D woven basalt fiber composite materials
by: Lihua Lv, et al.
Published: (2017)
by: Lihua Lv, et al.
Published: (2017)
Effects of matrix composition and Eu³⁺ concentration on luminescence properties of phosphate glass
by: Polisadova, E.F., et al.
Published: (2013)
by: Polisadova, E.F., et al.
Published: (2013)
Dynamic Testing of Reinforced Glass Fibre-Epoxy Composite at Elevated Temperatures
by: Gieleta, R., et al.
Published: (2002)
by: Gieleta, R., et al.
Published: (2002)
Influence of mechanical activation of polytetrafluoroethylene matrix of tribotechnical composites on its structural and phase transformations and properties
by: Budnik, O.A., et al.
Published: (2015)
by: Budnik, O.A., et al.
Published: (2015)
Annealing temperature modes influence on properties of heterophase nanocomposites based on ceramics "glass - Ag-Pd" systems
by: Lepikh, Ya.I., et al.
Published: (2014)
by: Lepikh, Ya.I., et al.
Published: (2014)
Effect of fluorine addition on the structure and properties of high-porous glass ceramics applicable for reconstructive surgery
by: Sych, O., et al.
Published: (2017)
by: Sych, O., et al.
Published: (2017)
Structure, Crystallization and Thermal Behavior of Fluorinated ethylene propylene (FEP) based Plastics Composites
by: Chen Jian-bing, et al.
Published: (2018)
by: Chen Jian-bing, et al.
Published: (2018)
Structure and strength characteristics of dispersion-hardened composite foils (films) based on iron and nickel
by: Il′insky, A.I., et al.
Published: (2013)
by: Il′insky, A.I., et al.
Published: (2013)
Thermal properties of alkaline and alkaline-earth borate glasses
by: Adamiv, V.T., et al.
Published: (2013)
by: Adamiv, V.T., et al.
Published: (2013)
Study of radiation-resistant gel bases for composite detectors
by: Boyarintsev, A.Yu., et al.
Published: (2013)
by: Boyarintsev, A.Yu., et al.
Published: (2013)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
by: F. F. Gasanov
Published: (2014)
by: F. F. Gasanov
Published: (2014)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
by: Гасанов, Ф. Ф.
Published: (2014)
by: Гасанов, Ф. Ф.
Published: (2014)
Modelling of crack nucleation in the fibre of composite reinforced with unidirectional fibres under shear
by: Гасанов, Ф. Ф.
Published: (2014)
by: Гасанов, Ф. Ф.
Published: (2014)
Effect of the Ba/Sr ratio on the optical properties of phosphate laser glass
by: Popov, A.S., et al.
Published: (2016)
by: Popov, A.S., et al.
Published: (2016)
Investigation of effect of viscosity on crystallization ability of spodumene glass-ceramic materials
by: Savvova, O., et al.
Published: (2016)
by: Savvova, O., et al.
Published: (2016)
The influence of structure defects on structure damping of unidirectional reinforced fibre composites
by: I. S. Kohut
Published: (2012)
by: I. S. Kohut
Published: (2012)
Titanium-based high-melting nanodispersed compositions obtaining and study
by: Bolshakov, V.I., et al.
Published: (2018)
by: Bolshakov, V.I., et al.
Published: (2018)
Optical properties of alkali and alkaline earth tetraborate glasses prepared in the alumina crucible
by: Adamiv, V.T., et al.
Published: (2011)
by: Adamiv, V.T., et al.
Published: (2011)
Peculiarities of Ag metallic nanoparticles formation in alkaline and alkaline-earth tetraborate glasses
by: Dutka, R.M., et al.
Published: (2015)
by: Dutka, R.M., et al.
Published: (2015)
Contact relaxation phenomena in nano-structured composite materials
by: Boyko, Yu.I., et al.
Published: (2015)
by: Boyko, Yu.I., et al.
Published: (2015)
Structure of Cu-In-Se thin films of variable composition
by: Grigorov, S.N., et al.
Published: (2009)
by: Grigorov, S.N., et al.
Published: (2009)
Research of formation of apatite-like layer on the surface of glass-ceramic coatings for dental implants
by: Savvova, O.V., et al.
Published: (2018)
by: Savvova, O.V., et al.
Published: (2018)
Experimental research on mechanical properties of desert sand steel-PVA fiber engineered cementitious composites
by: Che Jialing, et al.
Published: (2017)
by: Che Jialing, et al.
Published: (2017)
Structure and mechanical stresses in TaSi₂/Si multilayer
by: Devizenko, A.Yu., et al.
Published: (2018)
by: Devizenko, A.Yu., et al.
Published: (2018)
Specificity of radioluminescence of polycrystalline and composite scintillators based on organic single crystals granules
by: Gorbacheva, T.E.
Published: (2014)
by: Gorbacheva, T.E.
Published: (2014)
Low-temperature elastic properties of Zr₅₅Al₁₀Ni₅Cu₃₀ bulk metallic glass doped with yttrium
by: Bakai, S.A., et al.
Published: (2015)
by: Bakai, S.A., et al.
Published: (2015)
Effect of deformation and crystal size of mechanically alloyed and tempered composite tungsten powders with titanium additives on the sintering process
by: Jahangiri, H., et al.
Published: (2018)
by: Jahangiri, H., et al.
Published: (2018)
Galvanic ternary Fe-Co-W coatings: structure, composition and magnetic properties
by: Yermolenko, I.Yu., et al.
Published: (2018)
by: Yermolenko, I.Yu., et al.
Published: (2018)
Hybrid organo-inorganic composite materials of incorporative type based on calcium phosphates for bone surgery
by: Krivileva, S.P., et al.
Published: (2018)
by: Krivileva, S.P., et al.
Published: (2018)
Effect of luminophor/polymeric matrix chemical binding factor on the luminescence of PMMA-based scintillation composition
by: Aldongarov, A.A., et al.
Published: (2008)
by: Aldongarov, A.A., et al.
Published: (2008)
Periodical structures, absorption spectra and dichroism induced by laser radiation in composite AgCl—Ag film
by: Ageev, L.A., et al.
Published: (2013)
by: Ageev, L.A., et al.
Published: (2013)
Characteristics of lasers based on binary vanadate and orthoborate single crystals with disordered structure
by: Kosmyna, M.B., et al.
Published: (2015)
by: Kosmyna, M.B., et al.
Published: (2015)
Energy state and micromechanical properties of PbO-ZnO-B₂O₃ glass-ceramic functional coatings on AISI420 stainless steel substrate
by: Duriagina, Z., et al.
Published: (2017)
by: Duriagina, Z., et al.
Published: (2017)
Phase composition, structure, corrosion and radiation resistance of synthesized Ca₁₀(PO₄)₆F₂ and Ca₉Sr(PO₄)₆F₂ fluorapatites
by: Shkuropatenko, V.A., et al.
Published: (2019)
by: Shkuropatenko, V.A., et al.
Published: (2019)
Structure-property relationships in polymer nanocomposites based on cross-linked polyurethanes and carbon nanotubes
by: Lysenkov, E.A., et al.
Published: (2015)
by: Lysenkov, E.A., et al.
Published: (2015)
A study of effect of injection molding process parameters on the impact performance of plastic product fabricated by fine fillers filled LDPE
by: Hua Cai, et al.
Published: (2016)
by: Hua Cai, et al.
Published: (2016)
Structure and optical properties of CdS polycrystalline layers for solar cells based on CdS/CdTe
by: Khrypunov, G.S., et al.
Published: (2019)
by: Khrypunov, G.S., et al.
Published: (2019)
Similar Items
-
Mechanical and fatigue properties of CFRP plate reinforced steel structural interface
by: Hua Zhu
Published: (2018) -
Optimization of preparation process and performance analysis of fly ash foam glass
by: Zipeng Qin, et al.
Published: (2018) -
Effect of nucleation mechanism on the structure of polyfunctional calcium phosphate glass materials
by: Savvova, O.V., et al.
Published: (2014) -
Fabrication and mechanical performance of 3D woven basalt fiber composite materials
by: Lihua Lv, et al.
Published: (2017) -
Effects of matrix composition and Eu³⁺ concentration on luminescence properties of phosphate glass
by: Polisadova, E.F., et al.
Published: (2013)